8diffusion « not bad »
Published on 04/01/12 at 02:09I use them for two years
yes some other model tested before purchase
they are relatively effective pregnant little we glue them a good amp behind
departing fesait I turn with a 602 xls but the poor was finishing ar clipper before reaching a correct noise
since I use them with a crown MT 1200 .... and nothing to do
it is anyway the hang of using them with eQ and a compressor because the highs are really yucky when pushed and thoroughly deserves 1kHz and 2kHz to kill -8 / -10dB and -10dB a roughing -3 from 6kHz
However, for the price are very good speakers "almost" full range (47Hz -> 16kHz)
I separated myself because I spend on the more upscale but these speakers are a good buy for amateur and professionals debuttant
their size is acceptable and reasonable weight roughly (I'm 1m70 for 65kg) and I handle them alone (I'm a bit of a nag ...)
with the experience and the same budget I would take these speakers without hesitation after more budget I would go on MRX 515 that already possesses because they are as effective (though moin sub (65Hz -> 22kHz) and especially as powerful for moin moin bulk and weight ... and especially since they conceded a MA in 2400 in stride
against budget level by changing from single to double ...
I advise the use of Crown amp / old generation Amcron on these speakers because they are very sturdy and powerful all processed itself with dbx DriveRack PA +
because for the price it's a real little pro processor (for debuter) and it already has these speakers in a preset
After if I had the experience and the budget ... I would leave the office on a system Nois Audio Control .... this much more expensive but much more
sensitive / effective / powerful / Dynamic
ais you have to start etit before investing in this type of box
yes some other model tested before purchase
they are relatively effective pregnant little we glue them a good amp behind
departing fesait I turn with a 602 xls but the poor was finishing ar clipper before reaching a correct noise
since I use them with a crown MT 1200 .... and nothing to do
it is anyway the hang of using them with eQ and a compressor because the highs are really yucky when pushed and thoroughly deserves 1kHz and 2kHz to kill -8 / -10dB and -10dB a roughing -3 from 6kHz
However, for the price are very good speakers "almost" full range (47Hz -> 16kHz)
I separated myself because I spend on the more upscale but these speakers are a good buy for amateur and professionals debuttant
their size is acceptable and reasonable weight roughly (I'm 1m70 for 65kg) and I handle them alone (I'm a bit of a nag ...)
with the experience and the same budget I would take these speakers without hesitation after more budget I would go on MRX 515 that already possesses because they are as effective (though moin sub (65Hz -> 22kHz) and especially as powerful for moin moin bulk and weight ... and especially since they conceded a MA in 2400 in stride
against budget level by changing from single to double ...
I advise the use of Crown amp / old generation Amcron on these speakers because they are very sturdy and powerful all processed itself with dbx DriveRack PA +
because for the price it's a real little pro processor (for debuter) and it already has these speakers in a preset
After if I had the experience and the budget ... I would leave the office on a system Nois Audio Control .... this much more expensive but much more
sensitive / effective / powerful / Dynamic
ais you have to start etit before investing in this type of box