Boss GE-7 Equalizer - The Clairvoyant - Modded by MSM Workshop

There is a manual with ....

USE

As another GE-7

SOUND QUALITY

To each to see ...

NOTICE GLOBAL

I just let a comprehensive review that will I hopes to illuminate future buyer.
Regarding the change I made on a GE-7 Japan. Based not so bad my concern was to reduce the little breath but is there even when Introduced and especially to get a flatter qualisation 0. Both say right MSM after the mod is not made for my 2nd order so I do not dvelopperai. Regarding the breath there is a better certe but to say that I can use my GE-7 into a corner as it is announced on the vendor website .... My opinion is simple, this mod is the shot but you will need to go much further changes if you wanted to have no breath. In my case I use three diffrent rglages and convenience so I have 3 GE-7. In order to get a perfect rsultat I left the base without changing their mod any component the way they do. I have changed about half-cons but I am all in very high end in terms of quality. (About 1 pice ... Yes, I do not buys wholesale) Then I changed the buffer. Mrs treatment, very high-end (6 pice).
Voil basically, I think this mod is worth it but do not expect miracles either, go a little further for a flawless result.
Sacha, t all the same as the analog is not any exact science and is the component of the quality varied greatly from one series to another. This is case by case. That a is for Japan as for Taiwan. (Y when even a little more work on the basis Taiwan is not terrible)
I conclude on the fact that it is a good compromise ... or a good beginning towards the improvement of the pedal.

There is a manual with ....

UTILIZATION

As another GE-7

SOUND QUALITY

At each show ...

OVERALL OPINION

I just let a comprehensive review will hopefully inform future buyer.
Regarding the mod I made on a GE-7 Japan. The base is not bad my concern was to reduce the short of breath but there is still present and especially to get a flatter EQ 0. Both say right now the mod MSM is not for my sake 2nd so I will not elaborate. Regarding the breath there is a better course, but the means that I can use my GE-7 into a corner as it is announced on the vendor's site .... My opinion is simple, this mod is worth the blow but you will go much further in the changes if you wanted to have no breath. In my case I use three different settings for convenience and so I have 3 PG-7. To get a perfect result I came away from the base of their mod but without changing all the components as they do. I changed about half-cons but I went to the very high end in terms of quality. (About 1 € coin ... Yes, I do not buy wholesale) Then I changed the buffer. Same treatment, the very high end (6 € each).
That's basically, I think this mod is worth it but do not expect any miracles, he must go a little further for a perfect result.
Knowing all along that the analogue is not a science entirely correct and that the quality of component varied greatly from one series to another. It's a case by case basis. Whether it's for Japan as for Taiwan. (There's still a bit more work on a Taiwan base is not terrible)
I conclude on the fact that it is a good compromise ... or a good start toward improving this pedal. It will still be entitled to claim even better quality components for 20 €. I think that despite the charges included the commission is juicy.