View other reviews for this product:
papalolo79
Published on 01/16/10 at 04:19
ECHO MACHINE EM600
This stomp box modeling stereo echo recreates all
delay effects analog, digital and tape. Through its many settings
adjustable, the EM600 is ideal regardless of the color desired sound, the echo
vintage tape to digital delay through the analog BBD delay.
1. CONTROLS AND CONNECTIONS
Top view
The MIX control adjusts the volume of the delay effect.
REPEAT button sets the number of signal repetitions.
The TIME control adjusts the delay time. The range of possible values depends on
delay mode selected. The delay time determines the speed of succession
repetitions. When TIME is in MIN position, the pedal sounds like a chorus or
flanger. You can also enter the delay time by pressing on the beat
the foot switch pedal. The value thus input is erased when you
Again turn the TIME button.
The MODE switch lets you choose the delay:
The ON / BATT LED illuminates when the effect is active. She also serves
Status indicator of the stack.
The switch foot pedal used to activate / deactivate the effect. It is also used to
tempo input: maintain the foot pedal depressed for at least two seconds
accessing the input mode, then pressed repeatedly in rhythm. To exit
input mode, tempo, keep the pedal down again for at least two
seconds.
Connect your instrument to the inputs IN A and IN B to 6.3 mm mono jacks. Uses
only the IN A for a single source and two entries for
stereo signal (from a multi-effects for example).
Connects OUT A and OUT B 6.3 mm mono jacks to your amp.
Use only the OUT A for a mono signal or two outputs
a stereo signal.
Potentiometer MOD allows you to add a modulation effect interesting
delay. The modulation effects differ depending on the position of the selector
TYPE: ANALOG = vibrato, chorus = DIGITAL, TAPE = slight flutter of a tape.
Use the TYPE selector to choose the type of delay among three variations: TAPE
(Delay with little treble), DIG (Digital Delay) or ANALOG (delay its gross
slightly saturated).
ECHO MACHINE EM600
TRAILS selector prevents repetition of the delay to be interrupted
when you disable the effect.
Use the DC IN connection to plug in a block of 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace
9 V battery (not included), press on the hinges with a ballpoint pen and remove
the pedal cover taking care not to scratch it.
UTILIZATION
very easy to use
This stomp box modeling stereo echo recreates all
delay effects analog, digital and tape. Through its many settings
adjustable, the EM600 is ideal regardless of the color desired sound, the echo
vintage tape to digital delay through the analog BBD delay.
1. CONTROLS AND CONNECTIONS
Top view
The MIX control adjusts the volume of the delay effect.
REPEAT button sets the number of signal repetitions.
The TIME control adjusts the delay time. The range of possible values depends on
delay mode selected. The delay time determines the speed of succession
repetitions. When TIME is in MIN position, the pedal sounds like a chorus or
flanger. You can also enter the delay time by pressing on the beat
the foot switch pedal. The value thus input is erased when you
Again turn the TIME button.
The MODE switch lets you choose the delay:
The ON / BATT LED illuminates when the effect is active. She also serves
Status indicator of the stack.
The switch foot pedal used to activate / deactivate the effect. It is also used to
tempo input: maintain the foot pedal depressed for at least two seconds
accessing the input mode, then pressed repeatedly in rhythm. To exit
input mode, tempo, keep the pedal down again for at least two
seconds.
Connect your instrument to the inputs IN A and IN B to 6.3 mm mono jacks. Uses
only the IN A for a single source and two entries for
stereo signal (from a multi-effects for example).
Connects OUT A and OUT B 6.3 mm mono jacks to your amp.
Use only the OUT A for a mono signal or two outputs
a stereo signal.
Potentiometer MOD allows you to add a modulation effect interesting
delay. The modulation effects differ depending on the position of the selector
TYPE: ANALOG = vibrato, chorus = DIGITAL, TAPE = slight flutter of a tape.
Use the TYPE selector to choose the type of delay among three variations: TAPE
(Delay with little treble), DIG (Digital Delay) or ANALOG (delay its gross
slightly saturated).
ECHO MACHINE EM600
TRAILS selector prevents repetition of the delay to be interrupted
when you disable the effect.
Use the DC IN connection to plug in a block of 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace
9 V battery (not included), press on the hinges with a ballpoint pen and remove
the pedal cover taking care not to scratch it.
UTILIZATION
very easy to use