Not satisfied with those reviews?
Filter
Our members also liked:
4.3/5(3 reviews)
33 %
67 %
Write a user review
Users reviews
- hushguitare
A real difference!
Published on 03/31/14 at 16:55 (This content has been automatically translated from French)I use two tt on my mesa 2x12 cabinet mounted v30 and dissemination of sound is actually much better and more homogeneous broadcast whatsoever at home or repeats!
In terms of the manufacturing quality can be improved because it slightly on cheap material used.
If you want to mount several and you are a bit handy, buy one and build up remaining on the model purchased, you will save a few dollars what to change your old set of strings!
A word10 - pic&pulse
It has become essential
Published on 03/17/13 at 08:27 (This content has been automatically translated from French)Mounted in recent months on all HPs my guitar harem (as Celestion V30 and especially). This is actually wood crate very fragile and mounting on a HP mounted the front is almost impossible. The solution is then passed through the double-sided velcro.
In practice, it does its job. The V30 are softened without being castrated and there is more that diffusion cone facing unbearable HP. The sound is consistent from all angles. Sometimes it takes up a little treble compared to the original setting to locate the sound. Overall, it means better equal volume in a group.
No gene for the transplanted by micro, just need to be careful not to run the center, but it is rather rare, especially on V30.…Read moreMounted in recent months on all HPs my guitar harem (as Celestion V30 and especially). This is actually wood crate very fragile and mounting on a HP mounted the front is almost impossible. The solution is then passed through the double-sided velcro.
In practice, it does its job. The V30 are softened without being castrated and there is more that diffusion cone facing unbearable HP. The sound is consistent from all angles. Sometimes it takes up a little treble compared to the original setting to locate the sound. Overall, it means better equal volume in a group.
No gene for the transplanted by micro, just need to be careful not to run the center, but it is rather rare, especially on V30. I did not feel any worries on my 2X12 phase which is fully equipped.
In conclusion, I can only see advantages to use for the group in its repeat and live on small stages. Adopted.See less50 - ozzyozburne
Good product but ...
Published on 03/26/12 at 03:47 (This content has been automatically translated from French)Ordered from TT, received a few days, really well packed and protected. TT is serious.
Test hot, I just got it.
Housed in a 2x12 cab purchased from Sydney Plextone mounted Celestion G12M.
These are accessories for cab that improve the dissemination of guitar cabinet sound. Whether one is in front of or next to the speaker, we perceive the same sound. Cà works!
The most:
the sound is good, and the effect of these broadcasters is effective and musical.
The sound is actually more consistent front and side of the cab, we lost the percussive side (the wrong way) that we have in front of the amp. The sound is softer, no loss of volume or dynamic. It's very effective.
Why manufact…Read moreOrdered from TT, received a few days, really well packed and protected. TT is serious.
Test hot, I just got it.
Housed in a 2x12 cab purchased from Sydney Plextone mounted Celestion G12M.
These are accessories for cab that improve the dissemination of guitar cabinet sound. Whether one is in front of or next to the speaker, we perceive the same sound. Cà works!
The most:
the sound is good, and the effect of these broadcasters is effective and musical.
The sound is actually more consistent front and side of the cab, we lost the percussive side (the wrong way) that we have in front of the amp. The sound is softer, no loss of volume or dynamic. It's very effective.
Why manufacturers do not they ride home on their speakers?
Cons:
making correct but fragile.
3mm thick plywood, painted black with a cardboard cone stuck in the middle of HP. The glue is visible (it's way here), the cut is clean and correct, the holes correspond to the positions of the screws of my Celestion, no problem for installation.
One of my two TT split happened: the plywood that was fragile at this point, I reattached with glue, it's good now. This is not a case of the carrier, it is a case "structural". Well, let's ...
My cab has its HP mounted from the front, so the screw based on the Diffusor. Already they are limited in length when added, I was careful not to over tighten to avoid breaking the TT. So: HP mounted from behind: no problem since the screws will be in contact with the hp, and the TT will be sandwiched between them and the baffle, HP mounted from the front, delicate assembly required. If you squeeze too hard, for the thickness of these accessories, you break the tightening even without going there as a nag. Attention also to the length of your mounting bolts.
I put a 9 for sound, a 4 for quality workmanship, here is 6.5. I'm tough but Diffusor 2 TT = 40 € + postage, it's not given anyway.
A good product can be improved. (I do not know the competing version of Weber).See less130