All user reviews for the SM Pro Audio Nano Patch

I use an RME Fireface 800 as a sound card.

If the audio interface is a marvel, unfortunately it is not perfect, and among his faults we may deplore the lack of volume knob on the rack to control the monitor making it necessary to adjust the volume output in software, not very practical ...

This means investing in a dedicated solution as proposed by Presonus, SPL, Mackie, etc.. and therefore also SM Pro Audio.

I first purchased a Mackie Big Knob and I was delighted. The machine is beautifully built and the job he is asked without degrading the audio signal (which is most important in this type of device).

Unfortunately, due to financial concerns but also because I did not use the Big Knob for his volume knob, I had to part with it to adopt a cheaper alternative. So I ordered the small Nano Patch for 55 € at Thomann (always as effective in passing).

Well, we are in a different product category and it feels right out! I was expecting something a little bigger and heavier. If its size should suit everyone, I would have preferred a bit more. Similarly low weight that it can tilt back slightly after the four cables connected to his back.

The finish is correct but not extraordinary. All made of metal, it seems pretty robust but I deplore the plastic used on the main button. Its course is quite nice but not very precise: a small "float" to start and stop not very clear. The mute button is a bit "hard" for this type of application but it's really history of complaining. Finally I find his skates under a little too soft which is not to improve its stability once established.

Otherwise, it's perfect work being sought and in this price range can not really blame him much. The sound is not degraded and his side "passive circuit" makes it relatively neutral. I note that even just set to zero, the sound always comes from HP so it's not completely mute but not low enough to be annoying.
Too bad SM Pro Audio has not added also a small switch that allows Sun to attenuate the signal (20 in general), very useful on this type of device and should not be very expensive to do.

I personally would have preferred to put a few euros more for a product a little better built in terms of finish and also largest in terms of size but it will do the job in the meantime!

My rating 8 / 10 takes into account the quality / price ratio!

I have an RME Fireface 800 and I too faced the t mm pronblme ke Rexet: the need for a hardware button to control monitor speakers or others.

I am satisfied with the Nano Patch trs, the plastic button does not impede me at all, not against I agree with the fact Rexet ke knob of the race is too prcise: it Just move a little knob for the volume will decrease or increase of a fairly significant Manir ...

by a, frankly it does not default (and still has not impede me really), its size REPRESENTATIVES an asset for me (I can put it anywhere without that it takes the place), and it looks solid trs (while mtal).

I use it for one week after an emu 1616.

He filled his role well sandwiched between sound card and monitors and adjusts the level of monitoring without the need for software on a sound card without this type of setting. It is completely symmetrical

is the first of its kind that I use and value for price is right on the metal case inspires confidence knob is okay but not the most accurate he filled his role well.
In terms of regrets, he just actually look a little behind the rubber feet should be flat but good enough even as it remains stable.

accessory to have.

I Inano model (dual input and dual output) is therefore on this product that I leave a notice, having found no corresponding reference to AF.

For this price, this unit is a MUST especially if your soundcard has no control output. It is placed where you want on the desktop, suddenly you'll quickly often used to control its volume, whereas before it would have been reluctant to do so in mice.

The feeling of the button is perfect race with a little hair cell inertia it takes perfect size.

The advantage is that with its double Inano output I connect both my MSP5 in symmetric and a subwoofer multimedia con to any cheap non-symmetric (small jack 3.5) and that allows me to hear frequencies below 30Hz ... yes I know the purists will howl audiophiles tend to 400 € but the subwoofer from Yamaha, do not mess around! For now this level of low enough for me (and my neighbors too)

And so there is a second entrance, even if it is like the second output jack that is in 3.5, it has the merit to exist, to accommodate such a DAT, CD player, "you name it" as Ricans say our friends; D

I would do this purchase with your eyes closed.