SeriesNumark DM

The Numark Dm1050 is a entry level mixer, great for a beginning DJ who could be easily overwhelmed by loads of equipment and buttons and lights. This unit is incredibly simpe and has very few bells and whistles. It has 2 phono/line switchable inputs 2 line inputs and one mic input, Master and record outputs, 3-band EQ and gain on each channel, EQ on mic channel, Master and PFL metering, Replaceable crossfader with reverse and slope control, and Slider-style cueing. It's very simple to set up and operate and has a very minimalistic and open design. There's plenty of space for your fingers an everything is clearly labeled and functional. UTILIZATION The unit is easy to set up and fits perfectly a pair of Numark TT1625 Turntables. It's pretty easy to get everything hooked up and working, only took about 15 minutes. I have used this everyday for practice for nearly six months without a single problem. The crossfader is smooth an the knobs give a good resistance. The EQ is actually pretty good too, nothing high end but still, pretty good for the price. I have heard complaints about the crossfader breaking, but I haven't had a single problem with it after heavy use for 5 months. SOUNDS The unit is very quiet, and doesn't affect the sound of the vinyl at all (other than the EQ). It doesn't hum or hiss or have any crackly pots or sliders. Everything has held up over 6 months of heavy daily use. The EQ sounds pretty good, though it lacks High Mid Bass cut switches. Operation of the mixer is very simple and everything is laid out very well. OVERALL OPINION Overall, I would definitely recommend this mixer to a beginner DJ. I wouldn't really use it for performance, though you could if you wanted. It's a little hard to see in the dark so not really suited to clubs etc. It's perfect for a practice setup though, or even backup mixer just in case some idiot spills his beer on your good one.

I've been a DJ for several yrs now. Have owned the cdmix 1 and the cdmix2 -- the benefit of the cdmix2 was that it had anti-shock---no skipping ..whereas cdmix1 does not .. I preferred everything else about the cdmix1 but had already sold it and sold my cdmix2 as well I now run with a pioneer setup djm3000 and cmx 3000 -- wish i'd kept one of the numarks to have as a backup -- don't remember what I payed -but it was a reasonable price --under $300 pros -easy layout -very portable.. no anti-shock or anti-skip. Slow to start up --but so is my pioneer. I would like to have had more input choices..and ability to have more mics generally good--was able to replace one of the cd drives myself--so also easy to fix ... there are cases available now for it that work great--cover of case can double as cd storage overall a great backup mixer--only thing lacking is the skip protection ..I do miss having it and am considering which numark model to have on hand as backup --preferred cdmix 1 to cdmix2 but haven't tried out the cdmix3 This review was originally published on http://www.musicgearreview.com

This mixer is rackable, or the model that I had was at the time or purchase. They may have changed or upgraded design, I am unsure. It has analog connections and 2 channels, each with a line/phono input on each. The EQ is not parametric. Automation is not supported nor is any kind of synch. This is a basic mixer with no bells or whistles, making it ideal for a beginner or 'workhorse' mixer to use in less sensitive situations. UTILIZATION The functions are very accessible and easy to use. The killswitches and eq's are the only real feature, and they are the most basic of mixer controls. There should not be any problem with installation or use, and the manual is clear as there is not much for it to explain. The mixer is fairly small and easy to transport, making it ideal as a submixer or backup for live gigs or traveling studio applications. SOUNDS Numark mixers are not the highest of quality. In my experience with the two that i I've owned, the quality is fine but there is a deterioration in the quality of the crossfaders and volume faders relatively quickly. Even though the mixer is still great for a beginner, a more experienced dj would want to upgrade relatively quickly once the potentiometers and crossfaders started to deteriorate. On the other hand, it is doubtful that one would incur much cost in replacing parts for a mixer of this type. OVERALL OPINION I like this mixer for its portability and basic, bare bones functionality. The overall quality is probably a little less than what an experienced dj would want, but it does the job and certainly would not prevent one from rocking the dance floor if one were forced to use it at a gig. My first ever mixer was a barebones numark (it didn't even have kill switches) and it served me well for a few years. I would certainly recommend it for those who are on a budget as well.

Has everything a dj would actually needs Price paid $200.00 UTILIZATION I dont like the headphone jack location. i'd rather have it on the front panel instead of where my belt is. manual sucks. but i do like the kill switches buttons are sturdy and i'd definitly take this mixer to a gig and i wouldn't have to worry about it at all. what customer service? i don't think numark really has any customer service. SOUNDS This is a really good house mixer and probably good for scratching too. excellent sound. bass is seriously thumpy, mids are rich and the highs are clean. OVERALL OPINION Numark doesn't always have some of the cool extra features that other mixers have (features that nobody really uses when playing out). but ever since i can remember numark mixers always have excellent sound quality. Originally posted on FutureProducers.com Posted by: Unknown ( 4-, 2002)

All necessary features are all present. Kill switches are welcome extra. Aux send but no aux return. Price paid $ 150 UTILIZATION Very easy to use. Good manual but almost no need to use it. Its a beginners mixer with very intuitive layout. SOUNDS Nice and clear sound. Lots of headroom. Not bad at all but when compared to more upscale mixers midrange could be better. OVERALL OPINION Crossfader had to be replaced after a year. This is not a scratch mixer. Backpanel connections move a little when you connect or deconnect. Nobs are well built. Some inside hum appears from time to time. Overall this is a good mixer to learn the basics (except for scratching : lack of quality of fader). As soon as you master those basic skill its time to move further. I'm selling mine now and am looking for a Rane Empath or Stanton. Originally posted on FutureProducers.com Posted by: Unknown (January 1-, 2003)

Good standard of features, the -35db Eq's are good for playing around with mixing techniques. And the ability to switch 2 sperate sources through each channel, pretty good. The hamster switch has practically no purpose ... well I havent used it yet Price paid: £85 UTILIZATION Unbeleivably easy to use. The only thing that had me slightly confused to begin with was the cue volume controls well 'ard. Apart from some of the knobs, and fader tops may come off after 'heavy' use. SOUNDS Solid. Ive got a crap stereo, so I cant really judge its sound quality. OVERALL OPINION Its not great, but its the only mixer I have. The X-fader is starting to show its age now, and its not really a scratch mixer. I would definately consider Numark again, but one of thier higher-end mixers. Originally posted on FutureProducers.com Posted by: Unknown ( 7-, 2003)