Fender TN-SPL

www.fenderjapan.co.jp/tn-spl.html for info (oh Zolis small drawings!)

On the varnish used after it comes very likely in fuji gen Gakki (Ibanez produces the hi end also) the trssrieux work.

22 frets, bomb button but not too much (nothing slows during bends, and the action is low), complete varnished handle, skunk stripe on the back. Medium frets (same as on my epi sg pro 400) very well finished, a gentle rgal.
Very comfortable neck profile between c and u say, thinner than the above-mentioned sg but not by much, in fact it is mostly the more slippery feel that gives this impression.
Thinline is so hollow of each string cot, hearing only in f above.
Mcaniques soft and prcises vintage ashtray bridge that does not dmolit palm cornering, 3 bridges Chroms standard. Strings through the body, no toploaded option.
Consquent weight, more than I thought given the semiacoustique construction.
Bridge microphones and central texas TV special, plus a humbucker rather pokey handle.
5-way switch, we will return irrelevant.
I enlve 4 points for the wiring and humbucker, svre but just when looking at the displayed price.

USE

Fabulous round, his empty extra, sustain and REGULAR consquent, I bought without even plugging in fact (the experience as the microphones are not miracles, cinderella c ' is a tale huh) on a favorite.

Once this branch has become more critical, too much noise and ds phase problem that the humbucker is involved.
The set is silent texas special set (neck pickup three son, reverse polarity reverse wound) and can not be cabl that in one way because the bridge is the mass of the microphone.
Ds at why the hell are we left with a humbucker out of phase? It's simple, combined are more than sound is hollow and very low. Only solution to reverse his son, which is not seen by the blind cable conductor, very late at that. As the cover is welded the base of the micro unless you want to risk trashing everything ... so dead!

So of course the jack is standard TV tintin cords sew, and hello to tighten when he takes the game. Of course it is also not blind cable ...

10 violin, electronic 3 (thanks to texas ...), insufficient total.

SONORITS

I implore your Clémence, as I rethink the electronics, my RESULTS will not match the guitar you could buy.

Replace the humbucker with a lag alnico, better than the original and just phase.
Because I can not stand the noise and the texas set is well done I megaswitch cable: 1 B and 2 million in series B and M In parallel
3 B and M series over N 4 In parallel B and M plus N In parallel In parallel
5 N alone (humbucker)

So I rested all sounds, without noise or very little.

I all the same note texas bridge has a lot of dog, a nice tonal balance and sacredfinition.
His partner suffers him to the unusual location in the middle, it's too twangy draft in the treble. Normal is PRVU for the neck position. My installation is less serious.
The original humbucker is rather slender, velvety and lack of heat, unfortunately.

I do not know how to write this chapter, as I customis we will leave 5 ...

NOTICE GLOBAL

It's been six months, it is beautiful crying and dlicieuse play. I rgl nothing at all, c'tait perfect original. Intonation is extra, rather curious given the three bridges all beasts.

I knew I would have a little work on the electronics, but I did not expect such a fiasco of the original humbucker. Frankly having to change the office on a rape 1400 euros is rude.

Only prevents, I'm super happy with this guitar, original and well done, and I know she will distance (fuji gen is not in the trash, do not mexico?).

Compared fire my fender baja is a few classes above, only to not much more expensive.

Cel as I have also a TV series peavey 2007 vintage and is at the japan This nearly new that I had to pay 300 euros ...

I put insufficient as rating, compared to the price asked. on the other hand you put 100 euros for a new humbucker and you blow the other fender TV carefree report qualitprix.

www.fenderjapan.co.jp / tn-spl.html for info (oh Zolis little drawings!)

According to the varnish used it most likely comes from Fuji gen Gakki (Ibanez that produces hi end also) the very serious work.

22 frets, but not too rounded button (nothing slows during bendings, and the action is low), varnished handle full skunk stripe on the back. Medium frets (same as on my epi sg pro 400) very well finished, a feast of sweetness.
Profile handle very comfortable between c and u say thinner than the above sg but not by much, in fact it is mainly the more slippery touch that gives this impression.
Thinline is therefore hollow ropes on each side, in hearing only f above.
Smooth and precise mechanical vintage, ashtray bridge does not demolish the palm cornering, 3 jumpers chrome standard. Strings through the body, not toploaded option.
Therefore weight more than I thought considering the construction semiacoustique.
And bridge pickups central texas tv special, plus a humbucker in neck rather pokey.
Selector 5 positions, we will return irrelevant.
I take 4 points for the wiring and the humbucker, tough but fair when you look at the price.

UTILIZATION

Channel fabulous, its extra vacuum, smooth sustain and therefore I bought without even plugging it in fact (the experience is that the microphones do not work miracles, Cinderella is a tale eh), on a whim heart.

Once connected it became more critical, too much noise and phase problems when the humbucker is involved.
The set is silent texas special set (neck pickup with three son, reverse wound reverse polarity) and can not be wired that way because the bridge is grounded microphone.
So why the hell do we find a humbucker out of phase? It is simple, there are more combined sound is hollow and weak. Only way to reverse his son, which is not seen by the conductor shielded cable, very late addition. As the cover is welded to the base of the microphone unless you want to risk messing up everything ... so dead!

Of course, the jack is standard tv tintin cords so bent, and hello to tighten it when he takes the game of course it is also unshielded cable ...

Lutherie 10, Electronic 3 (thanks to texas ...), total insufficient.

SOUNDS

I implore your clemency, as I rethink the electronics, my results will not match the guitar you could buy.

Replaced alnico humbucker with a lag, better than the original and just phase.
As I can not stand the noise and the texas set is well done I megaswitch cable as follows: 1 B and 2 B series M and M parallel
3 B and M series over N parallel 4 B and M plus N parallel in parallel
5 N alone (humbucker)

So I rested all sounds, no noise or very little.

I all the same note that the bridge has many texas dog, a good tonal balance and definition sacred.
His partner suffers him to the unusual location in the middle, it's too rough twangy treble. Normal is planned for the neck position. My installation is less severe.
The original humbucker is rather slender, smooth and lack of heat, which is unfortunate.

I do not know how to write this chapter, because I customized, we will leave 5 ...

OVERALL OPINION

It's been six months, it is good to cry and delicious to play. I did not set at all, it was perfect original. Intonation is extra, rather curious given the three jumpers all animals.

I knew I'd have a little work on the electronics, but I did not expect such a fiasco original humbucker. Frankly having to change automatically on a grater 1400 euros is tough.

Still, I am very happy with this guitar, original and well done, and I know she will distance (fuji gen is not in the trash, it is not mexico?).

In relation to fire my fender baja is a few classes above, ultimately not much more.

However, I also have a tv series peavey vintage 2007 and is at the japan, except that I had paid 300 euros new ...

I am therefore insufficient as a note next to the price. on the other hand you put 100 euros for a new humbucker and you blow the other fender Tele carefree quality / price ratio.