All user reviews for the Numark TTXUSB

I have two TTX, including one with the USB that I bought last year.

I actually like a lot of old DJ'S a pair of TECHNICS SL 1200 MK2 that I kept for over 25 years and I sold because I was using more, preferring to mix with CD.

No longer able to listen to my old vinyl so I bought there six or seven years one of the first TTX that has served only to read my vinyls I encoded. I'd be satisfied until it fails.
In fact this board has "tight"! Yep!
Its central axis directly dependent on engine is off while I was cleaning a disc rotating hand set! A shame when I think!

This is a priori a known incident and recognized users of the plate (frequent cases in my dealer).
I finally! ... So I do repair (250 Euros change this part of the engine anyway) and in the meantime trying to encode discs and not being on the deck would be repaired so I bought a USB TTX.

This plate became the reference in place of the legendary TECHNICS SL 1200 works well.

The BPM display is clear and precise and double buttons on / off, arranged angle are very convenient.
In short it's solid and it has become the reference in my deserved.

If you own TECHNICS you will not regret the change especially that TTX has no breath parasite, which was far from the case TECHNICS!

For USB, nothing to say, it is convenient but personally I do not use this function preferring encode my vinyl records directly to my computer without going through the little software that came with the board. I used it for SOUND FORGE.

Personally I wish it has a cover (as formerly the TECHNICS) that would prevent it from gathering dust that tends to become embedded in the rubber coating of the plate and pretty dirty too quickly quickly (hello hassle to clean it later).

The Numark TTXUSB is a higher end USB turntable that over shines the previous models from Numark. The TTXUSB is way better built than any other USB turntables that have come out recently. It has a high torque direct drive. You can adjust the pitch, and it comes with a BPM counter and key lock. The TTXUSB is also more expensive than the other models. The TTXUSB cost 400 dollars, which could be a bit overpriced if you are just getting a turntable to convert your vinyl to MP3 with.
Setting up the TTXUSB is simple, and it comes with instruction to install the cartridge. But take note that the cartridge which is a (CC-1) cartridge does not come with the turntable. I am not sure why they would not include one with it, especially at this price. The TTXUSB has a LED screen that will show you the BPM, RPM, and pitch settings. It can play at all 3 speeds including 33 RPM, 45 RPM, and even 78 RPM.

The downfall of this turntable is that it does not come with the cartridge that it needs. The cartridge that it needs is a Numark CC-1 and that cartridge alone cost 70 dollars. That means for the whole set up it will cost you a total of 470. I do think this turntable is great, but it is not for someone who is just using it to transfer files to the computer to get your vinyl into MP3 format. It is more for someone who is an actual DJ and does scratching. It is just a plus that it has a USB connection to it. It is well built and can take a lot of DJ use. If you are a DJ then this turntable is great, it is a plus having the USB connection on it to incorporate it in with your MP3 set up. It also comes with a user adjustable high torque direct drive motor. I have been using this since 2010 and it still looks brand new!

- How long have you been using? About 1 year

- Did you try many other models before buying it? Reloop and technics (non-proprietary)

- What is so special that you like most: Ability to change the position of the pitch, the line output, torque and engine speed variable pitch, right arm or S

- The least? The aesthetics of the plate

- How would you rate quality / price ratio? This is a very good turntable I bought Technics wanted but the price is downright abuse of the new and the opportunity especially since the cessation of production. One day I came across the Numark TTX USB from a dealer hand and I do not hesitate. And I do not regret since.

I use it for 2 weeks.
-What I like most is the look, very nice light cool design robustness (can be less for the start stop button in time I will see) the different torque pitch nikel
Before I had a Stanton-T80 which is not bad at all but the TTX USB is something else
I find that the value for money is certainly very good I think. I pay € 399 with Ortofon OM Pro comes with. So I think yes it is not money lost.
"I love to try the vestax or technics mk2 pdx2000 to change, but this choice I do it again without any problem! good mix I put 9 because I think we can always do better!

◦ For how long have you been using it?

I have these plates since casiment 4years

◦ Did you try many other models before getting this one?

yes, I try to 4model gemini different at the time (belt driven)

◦ What thing do you like most/least about it?

Most:
solid platinum
nice design
Driving reliable and stable
pitch INPEC
strength of the button "start / stop" impecalbe
standing start of the stage adjustable and reliable
all with a lifetime of at least 4 years I would say for the moment

So if the material is handled with care, it is a solid and reliable equipment

The Witness:
may be a little fragile ds arm of the plate at the head of conection
after it there 's still a good thing that can lead to negative.
for a person who decides which begins with this material's achter.
I recommend these people to provide for the case of ds animaion Evening predict Raman their own deck for a simple reason.
if you fall in the evening on a belt drive turntables (for ke belt can be a little tiring).
Bin you screw up your party automatically because the sudden shift of direct drive and the drive belt is not improvised on the spot.
YOU WILL NOT BE ON THE TURNTABLES MIXER DRIVE BELT

Has put this point which is better now to be wary novices.
This is a platinum GENIAL!

I use it for 2 years
Not so, one or two technics during evening free, that's all
I wanted to buy a plate, I had money then and not much to pay (with my parents! Now is a little different!) So I took the plate and a second and frankly I'm definitely not disappointed!
Good value for money. very good quality. Price a bit expensive, but cheaper than tjs technics.
Platinum heavy and robust. Pitch up 50. possibililté of key lock. The key lock is to increase the pitch without changing the tone (in theory). The key lock is pretty good quality but not super accurate. It sounds a little gadget. plus the effect pitch can be a desired effect as for the scratch for example. there is also the possibility of settling curves starting and stopping of the plate. ie to have a progressive or a couple who live attack, and the torque of this machine is pretty impressive. It is more adjustable, 1.5 to 4.7 kgf / cm.
Me I use these primarily for scratching turntables. And with good Ortofon well regulated, there's no worry, they assure.
Anyway I am filled with these plates despite some gadget. I am enjoying thoroughly velcro and she responds very well.

For how long have you been using it? 8 months

Did you try many other models before getting this one?
technics mk2 for 4 years and reloop 2000.
Otherwise quickly QFO, 500 tt

What is so special that you like best
First torque adjustable and more. At max setting are perfect for scratching beat juggling, it's the feast of the scratch plate is responding well and go back vite.En lower setting is better suited to the mix.
I like the feel general stability of the plate, but my request ca'a a lil time to adapt from the mk2.
Otherwise the pitch road, connect detachable, 2 arms, with 2 start stop and stop setting tps demarage, the reverse can also be fun. The digital pitch. overall quality of the product and also ... they are beautiful!

What is so special that you like least?
Few things in fact if not bad your disposition Adjuster to stop the board not too practical and bpm counter that does not serve me and looks not terrible

What is your opinion about the value for the price?
€ 800 per pair new: the fun
Quality really is to go

Knowing what you know now, would you make the same choice?
Oui.Pour sure I would do this election and urges remains to be seen over time but until then they never failed me