All user reviews for the Ecler HAK 360

I went back to scratches lately, I had the opportunity to buy cheaply the famous E-CLER HAK 360, a table which I had heard many positive but I never had the opportunity to thoroughly test ... this is now done.

At first glance, this is a pretty solid top, larger and heavier than most other mixers. To make a fast turn at the main features is quite extensive and even more than complete with respect to other tables with entries LINE / PHONO / MIX / SESSION / EFFECT / REC RCA, 4 outputs including 2 RCA and 2 XLR mic input, headphone jack. Eternal Cross Fader from E-cler, both faders and their respective settings curve on the side a bit like the Vestax PMC 07 at.
Finally, from an aesthetic point of view it's pretty simple with her black dress and gray façade metal pots in platiques

UTILIZATION

In terms of use, this is where it catches a little. Compared to other tables, the layout of knobs and their assigned function is a little mess and it will take time to adjust especially if you have been accustomed to mix with the knobs tables placed vertically, j 'not even imagine what that little give in the dark (I think equalizer) in any case I have yet not find the logic in E-CLER available except for "nothing like everyone else" !

It's a bit the same for adjusting the crossfader curve that has a design flaw because it is reversed (at least on some versions including mine) and I took some time to find the right setting curve! For Faders is less complicated at the same time, they use less especially scratch. Let's talk about the famous Eternal Cross Fader! Liquidity levels at nothing to say it's going 200 miles an hour, it feels good that it's solid, I would have preferred just a little thicker buttons but hey it's a matter of taste. Against by opening the cross is slightly longer than the other tables, we can see the scale is missing a line before closing, at first I felt like having a cross ultrafast whose opening was not levels of fluidity, with the setting that has improved a bit but hey it gives me a feeling of discomfort. I did check my cross but it was nikel ... maybe a design flaw .. will know!

SOUNDS

The levels of sound quality, I have not found levels of its concurentes I feel back on good old Vestax PMC 05 PRO II, ie a sound slightly noisy, not clear enough on certain frequencies, especially if you mix old LP, the equalizer is not necessarily the same penchant accurate. For mixing or Serato CD is much better. From a general point of view, the amplification is insufficient for my taste, it does not strike enough! Especially in Hip Hop where it can quickly saturate it or blow a bit when you push the sound and I am not an old model!

OVERALL OPINION

In the end, I kept one month because the mayonnaise did not unfortunately and it's disappointment that dominates! With ergonomics and rather dubious finish some defect at the cross, we clearly feel at E-CLER Inover and Differentiation is not a good mix. At the same it is clearly below its main rival (Vestax Pro 07, Pioneer DJM). Nine I did not really understand the price even at the time aside to take a less conventional mark, used 200euros it seems more reasonable. This is a bit harsh as much attention to finding the DJ appreciateany much but is a range of a little table top and so obviously it suffers in comparison, in the lower range (Vestax PMC 05 Pro III, Numark DXM Pro or other) is clearly match! Anyway, if like me you do not have your habits in E-CLER, test there long before you buy!

Ecler HAK 360 is a well built high quality DJ mixer that cost over 600 dollars. The price seems high but you will get your money’s worth right away! It has a 3 band EQ and weights around 12 pounds. This mixer is gear more for the battling DJ. That is why it is so well built. This mixer is built to take a beating and keep working. The slider/fader knob is very well built, I don’t think it would ever break or cause a problem.


UTILIZATION

All of the basic functions are easy to use, they are right on the main face of the mixer. Everything is labeled, and if you understand DJ mixers then you should be able to use this without a need for a manual or with any help. I compare this mixer a lot to the Vestax PMC-07PRO. They have similar features but the HAK now cost less than that mixer.


SOUNDS

It does not generate any hiss at all, in fact it generates no noise even when used at home for personal use or practice. It has 2 channel , 2 independent master outputs, cut switches, and 3 band EQ. Plus 6 inputs, 2 Line 1 Mic, 2 Phone, 1 session Mix. When you purchase the Ecler HAK 360 you will be covered by a 1 year warranty and replacement plan.


OVERALL OPINION

I originally heard about this mixer in a magazine a while ago. I found out that a lot of guys/female DJ’s where using this mixer to battle with in Europe so I got my hands on one online and loved it. I do still own this mixer but hardly ever use it unless I battle which is slim to none now because I just don’t have time for it anymore. It has a session input on it that will allow for a daisy chain setup for multiple DJ battle setups.

Table mix "Battle" HipHop but well suited trs house, techno, ...
<p class="MsoNormal"> 4 channels: 2 channels with fader and EQ (low, med, high), sessions with a CONTRL volume, with a microphone <span>EQ? (Low, med, high).</span>
Kill the EQ.

Rglage advanced Xfade, fade / cut, curve, cut-in-time, reverse.
Xfade eternal guaranteed for 5 years.
Rglage curve mode "Hamster" for the fader.
Mode reverse channel with conservation gains.

Send and return to two lanes.

2 outputs with indpendantes CONTRL volume. (XLR + RCA) + + pr-REC costs on Jack.

For the rest see the manual

<div style="overflow: hidden; position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px;"> Normal 0 21 false false false oNotPromoteQF / FR-BE X-NONE X-NONE ontGrowAutofit / ontVertAlignCellWithSp / ontBreakConstrainedForcedTables / ontVertAlignInTxbx / MicrosoftInternetExplorer4 mallFrac m: val = "off" / <! - / * Font Definitions * / @ font-face { font-family: "Cambria Math"; panose-1: 2 4 5 3 5 4 6 3 2 4; mso-font-charset: 1; mso-generic-font-family: roman; mso-font-format: other; mso-font-pitch: variable mso-font-signature: 0 0 0 0 0 0;} @ font-face {font-family: Calibri; panose-1: 2 15 5 2 2 2 4 3 2 4; mso- font-charset: 0; mso-generic-font-family <img class="smiley" src="/images/audiofanzine/interface/smileys/icon_confused.gif" alt="" /> wiss; mso-font-pitch: variable mso-font-signature: -1610611985 1073750139 0 0 159 0;} / * Style Definitions * / p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-unhide: no ; mso-style-qformat: yes; mso-style-parent: ""; margin-top: 0cm; margin-right: 0cm; margin-bottom: 10.0pt; margin-left: 0cm; line-height: 115%; mso-pagination: widow-orphan; font-size: 11.0pt; font-family: "Calibri", "sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin ; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin; mso-bidi-font -family: "Times New Roman"; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US;}. MsoChpDefault {mso-style-type: export-only; mso-default-props : yes; mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-hansi -font-family: Calibri; mso-hansi-theme-font: minor-latin; mso-bidi-font-family: "Times New Roman"; mso-bidi-theme-font: minor-bidi; mso-fareast-language : EN-US;}. MsoPapDefault {mso-style-type: export-only; margin-bottom: 10.0pt; line-height: 115%;} @ page Section1 {size: 595.3pt 841.9pt; margin: 70.85pt 70.85 pt 70.85pt 70.85pt; mso-header-margin: 35.4pt; mso-footer-margin: 35.4pt; mso-paper-source: 0;} div.Section1 {page: Section1;} -> tyle

<p class="MsoNormal"> Table mix "Battle" HipHop but well suited trs house, techno, ...

4 channels: 2 channels with fader and EQ (low, med, high), sessions with a CONTRL volume, with a microphone <span>EQ? (Low, med, high).</span>
Kill the EQ.

Rglage advanced Xfade, fade / cut, curve, cut-in-time, reverse.
Xfade eternal guaranteed for 5 years.
Rglage curve mode "Hamster" for the fader.
Mode reverse channel with conservation gains.

Send and return to two lanes.

2 outputs with indpendantes CONTRL volume. (XLR + RCA) + + pr-REC costs on Jack.

For the rest see the manual

</div>

UTILIZATION

We can not be simpler, it is not ncessaire to read the manual to start using it.

SETTING THE curve and cut the front, same for the headphone output and volume.
The potentiomtre the "cut in time" is very small, which quickly turn by mistake. It is occasionally so it quune rglage perfect as a.

The elements are all well spaced trs, convenient for my large hands. All is well indicated there is no risk of mistaking CONTRL or touch one by mistake.

I do not like "slecteur cue" for the pre-cost is a fader with left and right cue1 cue2. It is notched and I Naime not a. I prfr potentiomtre a classic.
Systm for the rest of the COST is very well, costs or pre-fader postfader.

SOUNDS

Flash sound
Super EQ, although progressive amplitude to Kill.

I can not say more because I do not have a system that sound at the top

OVERALL OPINION

<div style="overflow: hidden; position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px;"> Normal 0 21 false false false oNotPromoteQF / FR-BE X-NONE X-NONE ontGrowAutofit / ontVertAlignCellWithSp / ontBreakConstrainedForcedTables / ontVertAlignInTxbx / MicrosoftInternetExplorer4 mallFrac m: val = "off" / <! - / * Font Definitions * / @ font-face { font-family: "Cambria Math"; panose-1: 2 4 5 3 5 4 6 3 2 4; mso-font-charset: 1; mso-generic-font-family: roman; mso-font-format: other; mso-font-pitch: variable mso-font-signature: 0 0 0 0 0 0;} @ font-face {font-family: Calibri; panose-1: 2 15 5 2 2 2 4 3 2 4; mso- font-charset: 0; mso-generic-font-family <img class="smiley" src="/images/audiofanzine/interface/smileys/icon_confused.gif" alt="" /> wiss; mso-font-pitch: variable mso-font-signature: -1610611985 1073750139 0 0 159 0;} / * Style Definitions * / p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-unhide: no ; mso-style-qformat: yes; mso-style-parent: ""; margin-top: 0cm; margin-right: 0cm; margin-bottom: 10.0pt; margin-left: 0cm; line-height: 115%; mso-pagination: widow-orphan; font-size: 11.0pt; font-family: "Calibri", "sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin ; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin; mso-bidi-font -family: "Times New Roman"; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US;}. MsoChpDefault {mso-style-type: export-only; mso-default-props : yes; mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-hansi -font-family: Calibri; mso-hansi-theme-font: minor-latin; mso-bidi-font-family: "Times New Roman"; mso-bidi-theme-font: minor-bidi; mso-fareast-language : EN-US;}. MsoPapDefault {mso-style-type: export-only; margin-bottom: 10.0pt; line-height: 115%;} @ page Section1 {size: 595.3pt 841.9pt; margin: 70.85pt 70.85 pt 70.85pt 70.85pt; mso-header-margin: 35.4pt; mso-footer-margin: 35.4pt; mso-paper-source: 0;} div.Section1 {page: Section1;} -> tyle

<p class="MsoNormal"> - How long have you use it?

Only two days I will modify my opinion probably later

- Have you tried many other models before acqurir?

Some other tables but never really high-end part to be tested quickly.

- What is the particular feature you like best?

- Elments well spaced
- Excellent in use Scratch and Mix.
- Rglages Cut-In-Time + reverse, great for crabs.
- Xfade ultra flexible and enjoyable, another notice saying that you could blow on it. I did the test and ... yes, it moves by blowing (slightly stronger) above!
- Rglages fader curves of plutt not bad for Scratch and Mix.
- EQ trs enjoyable for the mix.
- Physical appearance

- How do you report qualitprix?

I bought it used so trs Qualitprix good value. For a new purchase, the Rane TTM56S is a bit more expensive. A cross Nuo 2.0 + eternal return or innofader also cheaper. I would much hsit.

- With the exprience, you do again this choice?

For the price I pay no hsiter is a beautiful table HipHop / Mix. If I had not had that opportunity I think I bought a nuo 2.0 + Xfade Eternal.

</div>

- How long have you use it?
<p class="MsoNormal">
Only two days I will modify my opinion probably later

- Have you tried many other models before acqurir?

Some other tables but never really high-end part to be tested quickly.

- What is the particular feature you like best?

- Elments well spaced
- Excellent in use Scratch and Mix.
- Rglages Cut-In-Time + reverse, great for crabs.
- Xfade ultra flexible and enjoyable, another notice saying that you could blow on it. I did the test and ... yes, it moves by blowing (slightly stronger) above!
- Rglages fader curves of plutt not bad for Scratch and Mix.
- EQ trs enjoyable for the mix!
- Physical appearance

<p class="MsoNormal">

<p class="MsoNormal"> - What is the particular feature you like the least?

- A little big.

<p class="MsoNormal" style="line-height: normal;"> - Fader&#39;s "Cue" for the pr-cost Crant in the middle :-(

<p class="MsoNormal" style="line-height: normal;">
- How do you report qualitprix?

I bought it used so trs Qualitprix good value. For a new purchase, the Rane TTM56S is a bit more expensive. A cross Nuo 2.0 + eternal return or innofader also cheaper. I would much hsit.

- With the exprience, you do again this choice?

For the price I pay no hsiter is a beautiful table HipHop / Mix. If I had not had that opportunity I think I bought a nuo 2.0 + Xfade Eternal.

The HAK 360 Ecler is simply the best Hip-Hop table I've ever tried!
I depis a week is I am more than satisfied. Before that I dj u 1 Vestax PMC 06 Pro, an SM1 (numark) and a PMC 17 A still with Vestax!
Vestax c is good but also trs trs trs expensive and fragile. On average I changed my cross every 6 months in severe (90 each) which ultimately ruin me.

QUICK? THE HAK 360 is very well pens all levels.
In the outgoing board, I t struck by the quality and gnrale work environment trsdnud facilitating all phases of scratching.

The 360 ​​is a mix Hip-Hop 2-way switch for sending to rack effect + in + one session a combo XLR / Jack Microphone with dpart effect. 3 outputs with a Rec for recording.
The three band eq is semi-paramtrique (-30 / +10 db) and especially for efficient trs mdium.
The connection is complte (RCA + XLR)

UTILIZATION

The manual MRIT to be read as only 4 pages in French that can learn all about the Mixer.
The grip for a dj express is IMMEDIATE, and curves SETTING THE> faders and crossfader are prcis trs. The function Cut-in-time allows electronic rgler the opening time of the cross-fader, a large Premire which provides the cutting short of the market +.
In addition, the cross is the most lightweight in the world and especially ultra rsistant (5 years manufacturer's warranty)
In short a killing.

SOUNDS

The eq is great for scratch and mix hip-hop. The background noise is ngligeable normal volume.
The sound quality is much better than Vestax, more vibrant and no noise thanks to cuts in the fader and cross fader induction. (See website ecler)

OVERALL OPINION

There is great similarity with the PMC 07 Pro version clbre or samurai. I have test both for over an hour in the shop, I am addicted to cross littralement tomb ecler.
All phases of difficult technical back Vestax or Numark dsormais are a breeze on the HAK 360.

Basically, a superb mixer bnficiant dernires revolutions of all techniques for scratching!
A Must!

Dj JS

But not all rack Manir, it's better.
2 lanes between line / phono, mic, gain correction 10/-30dB
Connectors XLR / RCA
Crossfader magntique => a must
Rglages faders curve prcis
3 outputs

UTILIZATION

Hyper simple getting started
Knobs and well spaced prcis
Manual clear and sufficient

SOUNDS

The quality of sound is irrprochable, no breath or parasite grsillement
Possibility to cut with the real equalizer, good mix and scratch

OVERALL OPINION

I've had 10 months
The top in this console, the Eternal crossfader! a marvel
I once had an F Stanton SK6, which cross the silent dj soft but not see anything! Ecler it's solid!
Report quality / price trs INTERESTED, it lacks magntiques faders for each channel as the Rane 56 be the best table scratch the march.

Without hsiter, I would do this choice!
PS: I bought 629 in Germany!

No rack (so the "ears" do not scratch the turntables)
XLR and / or RCA
No effect section, or parametric equalizer, however insert a loop on each channel and on the microphone.

UTILIZATION

Config 'very simple, getting used to, stroke adjustment fader to make his taste, his touch, but it's better like that ...
The essential functions are all at hand ... The manual is far from necessary, maybe just for the jamboree to take a look To be settled in the material

SOUNDS

I find the sound of this console very transparent, very little color, mediums can be a little too present, and again, it depends on the amp and speakers placed behind the mixer. The equalizer very effective price to suit the ...
No breath, even at very high volume

OVERALL OPINION

6 months of use, a lot of scratch, I am satisfied ...
Small flat, adjusting the cut in time, which set the fastest (open <1 mm) cut no more ... Problem listed on many 360 (see forum)
RAPORT Excellent value for money, choice over again, so bin on .. (May be still a 56 ttm, just for fun)

it is not perfect rack that is used to avoid scratching the plate. a crossfader really great in short the "best" I have had the vestax crossfader and the famous samurai and what I can say ke c ke eternal cross is much better and more accurate! it should put as a pioneer in hardness setting and will cross the beautiful, the must.

UTILIZATION

The 360 ​​is very simple as many are said not need manual! it just takes time to properly handle the curve of the cross and the famous cut in time!

SOUNDS

The sound is really nickel and 310 before I say jpeux ke fate are still 10x better now! no breath
and led the equalizer is vrmt specific (in vestax 10000xmieu ke)

OVERALL OPINION

I use it for two weeks, I scratch really not bad jmix a background, this table is truly one of the best table at the time from the point of view ke scratch mix.
but it should also put the magnetic fader!
value for money is really great
I buy 610 euro orbit brussels!
I remake the chosen without hesitate!
the seri invest it worth it !!!!!

Trs complte this small table is missing anything from the session is over.
Trs good equalizer, kill it right there!

UTILIZATION

Very easy to use, personally I have not read the manual

SOUNDS

Trs sound satisfactory possibility to amplify the console with the riders who come with!
I do the test is that a low volume and a small Systm

OVERALL OPINION

I use it for two years, what I like most is the perfect cross for the scratch with its setting of the cut in time to cut ca millimeters! There is nothing I dislike about this table!
I have a table with several possd Gemini UMX-SE and a vestax pmc05pro3!
The report price is exellent quality I is found at 530euro in germany!
And I do it again this choice without hesitation fawn all over the range top will be a rane ttm57sl

J had an Allen & Heath Xone 32 before, I've sold the table to buy a hiphop scratch but to start being a dj tekno I voualis table versatile enough so I turned to ecler ...
Of Eq tjrs powerful even for the hip hop table guides
A crossfader Oooooooooooouah you blow on it it changes track
A quality made in its well rounded ecler must get used to eqs s or c may be accustomed to the Allen & Heath is my gallery in which change
Output table a little weak

2 master outputs
1 rec
1 session
Especially DUTY TO COMPARE ALLEN

UTILIZATION

Easy to use, the vertical Eqs ca t would be better but good ons made

SOUNDS

No breath
Console transparent compared to nuos
Eq effective

OVERALL OPINION

I used the last 3 months
What I like best, c is the cross and the sound, the less curve eqs
Quality price ratio can not do better
I would do without this choice hesitate
Ecler c is not the top but frankly I adore my ...

See description tech.

UTILIZATION

- The general configuration is it simple?
yes, it's a table-oriented battle / scratch.

- The usual functions are they easily accessible?
yes, very.

- The manual is clear and sufficient?
the manual does not explain how to change the jumpers provided.
Inquire here on AF. A more complete version of the manual is available at Ecler.com.

SOUNDS

The console is transparent. The sound is perfectly rendered if the volume is not mounted outrageously. After a 10kW sound system I have not tried. FYI I use rockit5 krk monitors.

When the master and gain are pushed to the bottom: there is little wind or not at all ... but the cross "eternal" make a dull click-mail (a serious tone) when they cut quickly (double click, crabs, transforms ...) can be heard only when the gain and master are pushed to the bottom. I do not know if it's to wear the cross or not since I bought the table occas'.

The eq is effective. The sound is round, clear, pleasant.

OVERALL OPINION

- How long have you use it?
About 1 month for the + scratch mix electro / hiphop and general.

- What is so special that you like most and least?
the +: sound in general, the cross "eternal" very flexible, adjustable cut-in, the eq very honest, XLR + RCA with 2 knobs separated. Super battle hiphop table.
the -: the click when you cut the sound to cross donf: A € 150 the beast one would think that it is THE cross ... and he's not bin P'ti default. The finish of the building and Nott feet that are pieces of rubber glued to both sides under the table, I've already lost, replaced by a brace is re-cut ... not too serious but ...

- Have you tried many other models before buying it?
I've experienced in recent years of quite different stuff:
numark prosm1, sm2, vestax pmc05 I and II, pmc06 ...

- How would you rate the quality / price?
Very good in time, only good in nine. Knowing that for a little less than twice what I paid I could have bought a ttm56 ... yeah super value for money ...

- With experience, you do again this choice? ...
I get back to you in a few months of use. We will see how reliable this time!

is all that should in my opinion of what is expected of a true mixer for djing.pas of superflu.pas but the effects of each channel to connect one end externe.equaliseur clasique.
crosfader the top is that a dj can dream.
the plastic buttons while the table costs 600 euros, ecler must not fuck our mouths. the model has 380 orders hak metal.

UTILIZATION

very easily acessible utiliser.fonctions well.

SOUNDS

a transparent, clear, good dynamic, I haven t note of breath.

OVERALL OPINION

last few years, I have already had a gemini (nothing to do), a numark, not bad .. the main crossfader is great, that of pre-listening (bounce) is a little short for my taste, I have to pay mine OCCAZ of 300 euros, so I am very happy, but 600 with plastic buttons, ecler could have a small effort.pour hip hop, excellent for house, techno .. great if you use a multi-effects device.
d OCCAZ it's worth, 600 nine out that c j is Abuzer ..
I would do this choice with his eyes closed!