All user reviews for the Behringer Super-X Pro CX2310

The Behringer CX2310 has everything we want in terms of control:
Level adjustment for each input line and output knob
Frequency setting knob with cleavage Switching X1/X10
XLR inputs and outputs
Led meter on each channel.
This filter can be used to 2X or 1X 2channels 3WAY.
I always used this filter indoor smoking studio, never carried.
It has always met my expectations, I have 234xs dbx which are more suitable for outdoor use (moisture transport huge time use, saturated grafted ... etc) I've never tried the behringer in these conditions.
Report excellent quality / price!
Rating 7/10

small 2-way crossover fesant are working to set up a small installation with two speakers and subwoofers will be his office! there is even more a subsonic canal treatment with its regulate according used against a lil equailzer downstream to correct the sound, good price performance! after there is always better! for me it suits me very well!

- How long have you use it?
6 months for sound to my group. We go in there for a Berhinger sw2432FX table for the master out to an active subwoofer for low thebox TA18 and PA15 to 2 thebox powered by an amp Berhinger NU6000 for the remaining frequencies.

- What is the particular feature you like best and least?
Doing its job filter, a real plus in a sound system, each instrument is better hear I can add another amp with HP 12 or 10 "+ tweeter to add a filter between the midrange and acute.

At least I would say the location of the switches on the back. In a sense they are well placed because it provides functions that did not have to be affected, but they are too easy to operate which can be problematic if they were operating or just to see the problem.
Readability between mono or stereo operation, good ca also, it was settled once and for all and after you touch more.
A VU meter for input / output have been nice but for the price ...

- Have you tried many other models before buying it?
No

- How would you rate the quality / price?
Excellent for € 45 secondhand

- With experience, you do again this choice?
Yes certainly

I use it for over two years to work with a subwoofer equipped with an HP JBL GTO W15 amplified by an amplifier QSC RMX850 bridged mono. The result is remarkable compared to many systems in HIFI. no background noise Considering the price is more than correct!

Done its job perfectly, only negative quality switch cover and frequency of the output sub "mono" can not be greater than that set for the crossover frequency of the other filters ... Input signal of the filter output sub "mono" downstream prices of the other two low-pass filters.

Used in stereo 2 channel sub and 2-way mid / high separated by a single crossover per channel.

The sum of the frequencies below these two crossover is filtered again in the central part of the device in a section dedicated "sub"

Can also be used in mono 3 way: sub / medium / high, but I've never used this mode.

I have two, to make multiple fronts + sub-type heads.

Nothing to report, more than 3 years of use for one and five years for the other.

namely that the frequency cutoff rule has both the HPF and LPF

to try to be clear, if you set your crossover at 120hz, your heads will be mitigated below 120hz and your sub above 120hz.

For my part, very good product, I've never asked many questions.

What is a crossover! and now it does nothing ...

Therefore a good choice to make, except for tenants to the general public, because all buttons are accessible to clients in this type of use.

filter 2 stereo channels with a common sub output.
That's really what it takes for most applications and is really cheap

For how long have you been using it? 5 years
It was my first filter, although I wanted one for not too expensive
Its design and price Behringer = Very good value for money

What thing do you like most/least about it?
small shallow 1U rack that does not heat. quite complete.
The buttons are locked and the box in good order.
All inputs and outputs are balanced XLR.
Adjustments are made simply, we quickly understand the operation.
Subwoofer output = gadget because the low pass filter (filter for the sub) takes its signal in the Low section AFTER the crossover filters for each channel.

- Knowing what you know now, would you make the same choice?
Yes, to begin, it works really well, I highly recommend.

Now I'm past the DCX2496 = much better, but more expensive
and very complex, out of reach of a beginner
who will find it hard to adjust properly to begin, choose the 2310

Hello all! I'm excited about the performance of the filter ... I used it solely to power a subwoofer, I realized that blew infrabass even when the output mixer silent on zero, we see the woofer move carrment several milimtres in doubt I hit the table, it's the same ... I hit the filter and my Crown did not go out any more.
It's that damn filter DCON.
In conclusion, it can be used to put under furniture is wobbly or to look pretty on a wall.
I'll buy an Electro-Voice AC One 244 euros in MusicStore, it has the stuff.

Used for a year.
Cheap product, purchased in dpart temporary solution to ...
Default: indications of approximate frquences trs.
But once calibrated (with a Clio), so good. Especially since the cuts are made without hollow or overlap.
The default cit by some about the dependency between the C-rglage down the tracks and the C-stro top of the mono subwoofer is a quality in my USGA: when I want frquence change the cut-off of my Systm, I did not touch the rglage the box, this is done alone. And when you consider that the evidence is unreliable, it is a big advantage.
Therefore dpend the intended use do.
Quality of its fit in absolute terms, given the excellent price.

Unfortunately I still have one of these filters, it is true that for the price it is very well equipped but forced to see that it works poorly.
of the two I was in the hands the same problem, a difference in output level between left and right which leads to the clip channel. (I double-check everything 50 times
reverse gain balance in upstream and downstream cables to no avail).
the only solution I found is replaced with its equivalent in DBX and since it works NIKEL.
I recommend this filter.