Log in
Log in

or
Create an account

or
< All Crown XTi 6000 reviews
Add this product to
  • My former gear
  • My current gear
  • My wishlist
Crown XTi 6000
Images
1/20
Crown XTi 6000

Dual-Channel Power Amp from Crown belonging to the XTi series

Price engine
Classified Ads
Forums
manudox manudox

«  The power is there, the power handling to see ... »

Published on 11/30/10 at 01:29
This review complements the JBL PRX635 I use together.

Unpacking the carton. I connect, I call pushing the parameters to my subs JBL SRX718S, I have a little trouble with only 3 buttons. It's less intuitive than on Driverack and other BSS. I decided to connect the PC via USB for configuration.

Download 40MB of software, USB connection, amp detected, it works! (PC vista ...)

After research, I am disappointed by the fact that we can not say that the parallel output of the amplifier is filtered through low to attack satellites.

I had my back rack with driverack to filter satellites.C is stupid I'm running a processor that has 6 outputs with high pass ... Brief.

I am looking for settings for boxes in the library, can not find the presets for srx718s, it is always associated with the satellite channel at low channel B satellite. I then load those of VRX918S since it is the same case, the same HP but the attachment points in +.

I balance the amplifier, the limiter balance and go.

More fishing biensur with the PRX635 3-Way, we are then amplified Quad, I cut a 85Hz, the slope on the amp is 48db/octave.

It goes down very low, it grows well, the sound is rather round and shook the pants, not a sub-impact SRX.

During testing, the limiting amplifier was-6dB, I never saw the light turn-10db on the receiver. To reach-20db output was already level, this amp really underfoot in power.

Attention to food, the 1700W has given PRX are absorbed, the XTI has 1800W, as they are switching power supplies provide the margin on food, I was able to trigger the power so mute, I 3 devices on the strip.

I finally feel that my subs work compared to when I fed my QSC PLX3402. Normal he developed the 2x2000W/4ohm 2x1100W/4ohm cons of XTI.

I still have doubts about keeping the amp outdoors in summer, when tested in a cellar at 18 degrees, the fan mounts have a little plan, it is controlled by the amp up and down constant speed. The amp is filled radiators, D oblige!

A powerful and ultimately made clear, what I was looking for.
A similar system then in Nexo LS600 2PS10 R2 2 boxes and an amp NXAMP 4x1 is almost 2 times more expensive!

Here then for about 7000 € a system 2x1200W in subs (2x800W power amp horsepower) + 2x1500W satellites in well-functioning, flexible and compact.