Budda Budwah (2010)

Bought new in the USA, by correspondence, the board had an incredible game. C'tait particulirement Gnant. I t oblig any disassemble and tweak the joint with the gaffer for it arranges. Opration renewed from time to time depending on the frquence use. In short, UNACCEPTABLE.
The knob has crachouill after 6 months! No trssrieux!
By opening the interior, one discovers that cblages really are not terrible, not related to the price in all cases. Moreover, reading the opinion prcdent, I feel that we do not mean the same object! In short, the Made in China in all its splendor.


USE

A classic wah, nothing more to add.

SOUND QUALITY

True-bypass nickel.
The signal is therefore boost an output level supplmentaire prvoir.
Scanning is trsrgulier and very good.

NOTICE GLOBAL

I t trsdu because for the price, I mattendais something of flavou this is not the case. I guess I have not had luck with my copy, but when same is trsdcevant. Probably an exposure model that is expdi This proves to me even when it is a model that can very wrong age. Fortunately, the sound is good (if saccommode of boost).

Analog wah pedal designed in the United States by Budda Amplification (Peavey) but made in China.
1 stereo 1/4 "input jack and 1 1/4" output.
Powered by 9V battery or external 9V power supply.
"True Bypass"
The side of the modified base of the Darlington transistor (MPSA13) with respect to the previous version (violet) electronic circuit.
Very stable.

UTILIZATION

The pedal comes with an Allen key to be able to adjust the hardness (see instructions in French Tips & Tricks).
It is true that the switch is a little stiff and can not snap that up.
On my pedal, the clicking of the switch is hardly audible and does not bother me.
Attention to small hatch lock the battery, I broke mine on, closing the door. The rest really solid.
Quiet operation.

SOUND QUALITY

Everything is in the title: I wanted above all a wah that is not screaming, not aggressive, I'm thrilled.
With Budwah it is round.
Beautiful sound, very warm!

OVERALL OPINION

I use it for a month, this is my first wah.
What I like most: the sound. Not to mention it still has the mouth this wah, others are bland side.
Quality / price ratio: it is still very expensive. Even used in France, its price is higher than the new United States.
If I do it again this choice? Yes, but I do not buy new.

wha made in china. Beautiful object, solid, non-slip floor

out in

a real true bypass, 9v power supply up.

UTILIZATION

His only flaw: it can not be switched while seated, but hey it bends to lose some calories.

.

SOUND QUALITY

A modern filtered signal, do not expect to get something else;



The two worlds, vintage and modern, are complementary within its means and needs.

Like its robustness and its grain, simply

OVERALL OPINION

four months of daily use.

J'ètais accustomed to vintage wha before the budda not traumatized me, though.

I like the curve, the middle.

150 euros used to rebuild

Wha a beautiful and distinguished purple skirt and rocker nickel-chromium and carpeted caoutchouc.Lourde stable.Bien normally designed for a foot up.
Feeding easier. Input jacks and output and beefy fermes.Bascule fluid and well balanced ....
A true bypass which really does not seem true, however. Not a problem for me.

UTILIZATION

Only problem: the sofa well annoying. See below

SOUND QUALITY

Wha excellent, balanced sound, never aggressive: music before anything else.
Not perhaps quite acute, some say ... But no ...

OVERALL OPINION

I wha this long enough, and I confirm the criticism that Tina Arkos formula: get the rocker with too much enthusiasm invariably leads to touch her inside the top of the metal switch, despite the thin pad Felt supposed to buffer against this "knock on acceleration." Or he must control his movement every time, but this constraint spoils the pleasure of using the object whose sound qualities (linear change of the signal clean , no noise, no breath, no jerking, no holes, beautiful "whaaaa" wide open but not garish) and the musical balance, however, are remarkable. The simplest solution is to remove switch and replace it after, underneath, topped the threaded portion of a few shims, spacers that will reduce its height and put it out of reach of shock at the end of the race. Some washers but not too much, so still allow engagement of wha forced by pressing the rocker. This is to prevent the use of option ultimate sacrilege and iconoclasm (the trick maso .. Although .. .) hole drilled in the sheet diam.13mm of the rocker to leave the head exceed the limit switch ...
It is surprising that this design flaw apparently minor but actually very annoying, remains on such an object, while for the rest the build quality is very good.
That said, I have the previous version: the default may have been corrected in the new version of Office?