Hi everyone,

RUSI I finally set this thing thanks guys like toniodod, clarckkent4, sergiogibson of guitariste.com. It's really very difficult if you have the doc I behringer potash hours I did not understand. Also for your convenience I will not tell you not what to do to program it with a V-amp pro (I have only DSOL a): a zero is for MIDI like me. In fact I did not understand the principle.

----------------------------------------------

First and first we must choose the MIDI channel on which the v amp pro will match the support for this pdalier simultanment Arrows on 2 then A (you just turn on midi channels ) Here you choose a n 1 16 with the Arrows on the right (I chose 16) when you press select tuner. Ok you just said the v amp pro that he will talk to the pdalier on channel 16

------------------------------------------
GLOBAL CONFIGURATION

Now we have to say that FCB will discuss with the V amp pro on channel 16. I turn on the FCB while pressing DOWN (about 3sec)

=> Select Direct lights (green lead) I press UP to move the utility (you can come back later)

=> MIDI FUNCTION flashes I press the pedals n1 (I just say that I program the FCB V AMP PRO on a program change)

=> MIDI FUNCTION is still flashing and the pedals by n1 cons I display (red leads) that included 01

=> I can confirm with pressing UP

=> I enter the channel when I selected the V AMP PRO (for me 16) then pressing the pedals on the pedals and a 6 j'appuis UP to confirm. (If you select a channel style 2 or 3 I think we should write 02 or 03)

=> And I leave the global configuration by pressing DOWN for 3 sec

--------------------------------------------

PRESET PROGRAMMING

Now we will select the sounds you want to program select PRESET in Table V-AMPIRE SHEET / V-AMP 2 / V-AMP PRO REPRESENTATIVES all sounds dja programs in the v amp pro .

I take A2 (highway to hell), a small right-hand column (preset) is listed on n6

=> I stay on the bank 00 of FCB pedals I press the 1 (I put in the bank's A2 00 PDAL 1)

=> I press DOWN for 3 seconds => UP => short blasts on the pedals a flashing (the FCB I recall that in the V AMP PRO I'll get the sound).

=> UP (I confirm)

=> I write in the digital display 06 (see the patch of APRS A2 corresponds to the table n6) with pedals pedals 0 then 6.

=> UP (I confirm)

=> I press DOWN for 3 seconds to exit the preset.

try another patch v amp pro sound clean example: A8 (DRY funk) n 12:36 ok?

=> I stay on the bank of 00 ETFs I press the pedals 6 (I put in the bank's A8 00 PDAL 6)

=> I press DOWN for 3 sec => UP => short blasts on the pedals a flashing (l I remind the FCB that the V AMP PRO I'll get the sound).

=> UP (I confirm)

=> I write in the digital display 36 (see the patch of APRS A8 corresponds to the table n36) with three pedals and the pedals 6.

=> UP (I confirm)

=> I press DOWN for 3 seconds to exit the preset.

Voil you just set your pdalier two sounds is more complete. Now I STUDY programming pedals and try to see what can be done with this machine

If you can not program the FCB and I've dgrossit thank you for the job leave me a msg was always happy.

friendly