View other reviews for this product:
PierreBPSAF « Generally well »
Published on 12/09/11 at 00:15_ Cheap, strong, neat and compact inside: the Boss!
_ The A / B = OK, trs and transparent (Bote like passive signal near TruBypass
_ Trslger plop switching, but OK
(ISO = Signal Switching PhotoMosFET # 30 Ohms, i / o going in 2 directions, but the common masses)
_ ISOLATION: chssis mtal = NOT isolated from the masses 1 & 2 out, which are common
_ As against the Alim (via 2x1.5V AAA round cells) are isolated from the masses = ok Anti-50Hz hum. (Cest quil need for a battery ..!)
** BATTERIES:
_ The only annoying point, because even when consumed as 1xLED lights always! (They say 100200Heures: I tank ...
_ Have been a change: put a 910 Ohm Resistors in SERIES with my Alim Pedalboard 9Vdc external, to go to the Battery + = 2x1.5V = 3V! (Power supply current 5.5mA # TOTAL consumed)
Edit OK nickel: a hum-free operation because my output is isolated from other 9vAlimPedal! (My IS VoodooLabs Alim, PedalPower2 +)
_ If External Alim not an isolated attempt to replace 2xPiles 1.5v for 1.2v 2xAccus classic: a limit, but should be OK .. test!
_ The A / B = OK, trs and transparent (Bote like passive signal near TruBypass
_ Trslger plop switching, but OK
(ISO = Signal Switching PhotoMosFET # 30 Ohms, i / o going in 2 directions, but the common masses)
_ ISOLATION: chssis mtal = NOT isolated from the masses 1 & 2 out, which are common
_ As against the Alim (via 2x1.5V AAA round cells) are isolated from the masses = ok Anti-50Hz hum. (Cest quil need for a battery ..!)
** BATTERIES:
_ The only annoying point, because even when consumed as 1xLED lights always! (They say 100200Heures: I tank ...
_ Have been a change: put a 910 Ohm Resistors in SERIES with my Alim Pedalboard 9Vdc external, to go to the Battery + = 2x1.5V = 3V! (Power supply current 5.5mA # TOTAL consumed)
Edit OK nickel: a hum-free operation because my output is isolated from other 9vAlimPedal! (My IS VoodooLabs Alim, PedalPower2 +)
_ If External Alim not an isolated attempt to replace 2xPiles 1.5v for 1.2v 2xAccus classic: a limit, but should be OK .. test!