Brace Audio DWG-1000-TX Digital Wireless Transmitter

The Brace Audio DWG1000 Digital Wireless System is a multi-transmitter-capable wireless system priced at about $150.00 US List.

The DWG1000 Digital Wireless System offers a wide frequency response of 10Hz to 15kHz for thunderous lows and crystal-clear highs while providing an operational range of 100-feet from the base unit.

Brace Audio technology converts the guitar signal into digital audio and transmits it to the receiver using 2.4GHz Frequency Hopping Spread Spectrum (FHSS) transmission on any one of over 65,000 channels. During the conversion back to analog, the many problems inherent in outdated analog systems, such as audio hiss, crackle, signal loss, and RF interference, are eliminated, the company says.

Specifications:

Product contains

• 1 Transmitter

• 1 Receiver

• 2 – 1/4" to 1/8" Guitar Cables

• Belt Clip

Transmitter

• RF Output Power: 16 dBm

• Maximum Input Level: 2.75V peak to peak

• THD: <2% @ 800mV pp 1kHz tone

• S/N Ratio: more than 90dB

• Battery Life: 5 hours (AA size battery)

• Output: 33mm, 1/8". mono Jack

• System gain: 1

• Frequency: 2.4GHz, FHSS

• Input Impedance: 600KOhm

• Operating Power Voltage: 3.0V Typical

• Audio Frequency Response: 10Hz – 15kHz

• Lower Battery Alert: 15 minutes of life left

• Antenna: Internal dome

• Units operating at same time: 8–12

Receiver

• Frequency Type: 2.4GHz, FHSS

• Battery Life: 7 hours (AA size battery)

Miscellaneous

• Easy press function button to change channels

• ALL Auto Channel Lock System

• Link LED Low Battery LED

For more information, visit their web site at www.braceaudio.com.