All user reviews of 5/5 for the Randall RH50T

Head lamps 50 watts.2 EL34EH for power, three ECC83 and one ECC81 in prampli.
2 inputs (Hi-Lo) to compensate for the diffrence output level depending on whether your guitar team in single or double coils.
Effects loop with a switch to adjust the sensitivity to the pedals / racks
1 6-pin DIN jack for pdalier (included with cable)
2 outputs (4 and 8 Ohms)
Lead channel: 2 gains (2 grains) and switchable via footswitch DIFFERENT or switch on the front panel. EQ: bass / mid / treble.Volume.
Canal clean: Gain.Boost (switchable via foot or switch on the front panel. EQ: bass / mid / treble.
Master Section: Volume. Reverb (foot switchable).
Switches start-up and standby.
Note the rear of the Access Point for rglage of Bias.

UTILIZATION

Conventional configuration. For sound, let your ears guide you. Not much to throw. If you are looking for clean sounds that are high-volume, see Fender (Hotrod Deluxe). I like when a crunch and I am gt. The clean channel with the boost is engaged rgal, as he well rpond your dynamic of the game I thought let the lead channel of ct but really worth a look for the sound too. It is not far from the JCM800. The rverb is correct and not too invasive. I tried the effects loop but when it starts the lead, background noise invades everything. Qquechose certainly do with the power supply for my pedals and my cblage. I will retest and post it has an update. In Manir gnrale, the background noise is valid, clear and Submitted to lead. I intend to change the lamps in the near future (I heard about the problem of pairing MODELS original) and a Bias ProCD. I'll see if made a diffrence. At 550 Euros, I have some money for this opration. QYes In any case, out of the bote, it is parfaiteement usable dlivre a great power (my collgues do not hesitate to let me out ...).
UPDATE: the sound of the effects loop is a thing of souvenir.J 'actually uses the pedals in the loop (delay, tremolo, choros, booster) and out of the loop (wah, distortion). I actually RALIS superb ground loop by feeding the distortion (loop out) via the power supply gnrale of loop pedals and feeding the booster (the loop) via a spare power supply. Everything is now back to normal and sounds of hell. I leave a "9" because nobody is perfect.

SOUNDS

I play hard rock trend / heavy sounds with "traditional" (sounds like rich medium) and it fits perfectly my style.
My config: CORT Mirage 600 or Fender Start (Mexican team Tex-Mex) / / Wah / / Boost / / Dist-OD / / Tremolo / / Chorus / / Delay.
Cabinet 2 x 12 (built house with HP Celestion).
Again, the sound works and aisment trs quickly found its mark. No frquence Drang and I know what I mean: his prdcesseur is a Valvestate, which I had to tamper a lot to get a sound that suited me. Thank you for this good lamps heat
on the other hand I recommend it to mtalleux for whom the "mid-scooped" is a must.

OVERALL OPINION

Voil 2 weeks that I have. He had his baptism adj fire.
The construction looks sturdy and properly excute. It is compact, not too heavy to wear. I tried the head Vox AC30cc (more CHRE and fewer opportunities) and j'tais not too convinced.
Made in China, it is found among us an unbeatable price. In its price range, it leaves a lot of Trane.
Remains whether:
* The future will make me change my mind or not
* A change of lamps and a good rglage optimize its performance
If reliability is the appointment, I do it again this choice.

All-tube amp:
4 * 12AX7-pramp
Amp-2 * EL34
-50 W
-2 Inputs (hi and low)
Speaker outputs, 4 and 8 ohms
9-pin plug-pr the footswitch (supplied)
-Loop effects
-2 Channels (clean and lead) with a boost on the clean (= crunch) and two spars to lead gains
- 2 volumes + qua + spares lead presence
Master-section: volume and reverb

UTILIZATION

Config trs simple: even with a four straight was a good direct sound. to optimize the sound, turn the knobs a little hop and go.
So it's easy
no manual but not necessary (well I AIM for 5 minutes Premire, but even I, who know nothing I quickly found a good sound)
the pdalier provided is not bad but sometimes you have to press two switches to change its ... and I do not like the clappers
So I put 8

SOUNDS

So I'm the trend of death and doom mtal (so can be quite straight forward) and frankly at the moment nothing wrong (even if it's not the right edge and a distortion in the VHT). of course he has a lot of mediums, but I was looking for a style not too strotyp mtal nag (I play blues rock and the variation on.
I play a washburn idol gothic wi65c nickel for bourrinage but versatile. So I find what I want to like her.
not tried it with my distortion against
I get all kinds of sounds (even if the clean saturates quickly, ah lamps, jadore!) but still warm and alive, thanks to six small loupiotte.
go, 9 because I test a VHT.

little changed after a while of use, I may be investing in a compressor because its lack even when sometimes a little dense metal nag. So note down to 8.

Issue: I bought an equa ... and, admnage. I read over the amp lacked saturation to the metal, is wrong. however, is Necessary for an equa have a right and prcis devgros nag. In any case, this amp with my equa satisfy me completely. I prfr the power of a grain randall 50 home engl screamer, I now have the power and sound.

OVERALL OPINION

I've had 3 days
I love the heat lamps
I also tried the engl screamer (too loud) and DIFFERENT MODELS transos. in fact I had to buy the screamer combo, pi o crucial moment in gillou, I fell for the one, cheaper and with my sound too much.
a q / p with no equivalent (except the Peavey ValveKing but u buddy has a plastic frame and melted due to the lamps)
exprience with the budget and the same -> same choices
on the other hand more in a triple rectified, or a VHT engl powerball, why not?

edit: made over a year and have fun like crazy. I found my sound (or rather my sound since I bought an equa ...) and this amp can really have fun.

Amplification classic with two EL34 ECC83 prampli Tage
50 watt lamps, trs dynamic, trs own.
Two between high and low in faade in rear panel, two speaker outputs 8ohms and 4 ohms with auto tripping on 8 by 4, and an effects loop with a switch boost.

UTILIZATION

Configuration trs classic rgler easy, no need to get out of the Polytechnic to learn matriser bte.
Sounds neat, trs mind States, between Mesa and Peavey
Beautiful finish and quality components of the "Made In China" should not scare you, the specification is very well respected and monitored by Randall Corp.

SOUNDS

I'm an old hard rocker, made in England. I use my two RH50T for Tage amp through the effects loop input, the output of a prampli Marshall. And yes, I am trs Marshall, but the GB do not make any "lights" in 60 cm wide.
Set in such Manir, sounds are superb british, trs mind JCM800 2203.
I may as well play Hendrix, Gilmour, Blackmore, Toto, Vai, plain as distortion.
However, live sounds too amricains for me, pretty colors Mesaba style, and Peavey in Crunch and Drive.
I add that if the sound is fairly standard US using all the Tagus amp all by itself is remarkably DEFINITIONS and very fine grain (I love) ...

OVERALL OPINION

Since qq months in the studio.
The best: the dimension that goes with my Marshall cabs of 60/60, the config, the quality of workmanship for this price.
The least: I have to go through a pramp Marshall Marshall for my color.
I tried various MODELS before choosing this one. The award is made to cool the quality offered. The only problem is that I am unconditional Marshall, and I give feedback Mosfet two heads by a lab to make heads Lamps measures 60cm wide.
I would do this choice even if I'm on another ide (more CHRE the change). It's really a good head amp, solid, well finished.