All user reviews of 5/5 for the Numark TTX

How long have you use it?
I started to mix it two years ago. I then pass CDX, easy adaptation and ais same torque as same sensation vinyl etc ...

Most:
Lv torque design, both buttons start / stop, stop / start prcis trs, the key lock to make practical remix (no deformation of voice ...), No mass ( choice between phono & line), the positioning of picth (hip-hop classik)

The -:
Reliability (only the first sries now they hold the road), the pitch numrique.
Before the acqurir not I do not mix on other models. I essaiy today against the technics technics and my faith are not bad either ^ ^.

Good quality price, in time it works well!

With the exprience I would take a pair of MKII and a pair of TTX1. Why? I think the technics for training are very good reliability trs good torque but against the show is prfrable to have more TTX1 Aesthetics couple more powerful engine, the plateau rponds faster.

Conclusion: TTX1 Explosiv yes for the show and technics in addition to the drive (It's always better to have two pairs of plates in case one of the two falls in the harbor!). And I think today we must also know how to adapt between different brands, I am no purist or numark technics is a question of use.

Voil tchouuuu

- How long have you use it?

Since today!

- What is so special that you like most and least?

What I like most: design, its LCD screen.

- Have you tried many other models before buying it?

J'aiessayé the Stanton ST-90 and FTE! lol! my first turntables!

- How would you rate the quality / price?

EXCELLENT! Nothing to say especially since I have had a -15%
Otherwise they are super accurate plates, robust.

But a little background noise means is stopped when the music but nothing annoying.

- How long have you use it?

3 years, I have 4 personally

- What is the particular feature you like best and least?

The +: downtime, Straight-Arm, Desing, Power, Anti-Skip impressive
The -: Many electronics, small arms in alluminum srieu, noise in arms, worse Resistors with feedbacks that SL1200mkII

- Have you tried many other models before acqurir?

I peer in: SL1200mkII, SL1100a, PT2400, PT2000, STR8-100, SL1700

- How do you report qualitprix?

This is a table giving a cot "desing" trs interesting. With a straight-arm is trs aggressive joggeling the scratch. Parcontre does not allow the electronic things that gives me SL1200mkII (example: a stop of "power" that brought my tray towers 45 33 33 tunes to restart (shift)) is a tr s good food for the price!

- With the exprience, you do again this choice? ...

Possibly! Each table has its peculiarities.

Hi all, I just change the plates on these rumors to which I have for over a year and a half ...

In my case I find this board really interesting: there is a truly enormous torque, a style that breaks all the other plates (and some change), handling a very simple and really nice options (doule home / stop, BPM display even if you do not, reverse function ,...)

Apart from the display BPM is worse than useless, this board does nothing less than a technics ... yes DSOL its price which is cheaper ...

As for a mix, I've never had a problem with because once your call is vinyl and it remains until the end what is important trs, and in addition, with its weight it is difficult to move it (so it is advisable for the accessories) ...

As for the scratches, I've never had a problem because the deck is so heavy trs must be really awkward to blow his cell and, thanks to its torque, no reboots s 'not even hear (no dead time) ...

So I still do not understand why some people remain fixed on the technics that does not recall the price or change in appearance for years and years and it's not trs cool, while Numark offers catgories same plates which are in the nieaux CHARACTERISTICS, although the suprieurs MK2 Technics home ...

It is true that I do not know if after 3.4 or 5 years, they will always be as effective, but you know, if you do not scratch as Bourin and you take care, I do not know why verais they peteraient a cable ...

So trust me TTX1 home Numark worth ...

- How long have you use it?
I've received this morning impecable
- What is so special that you like most and least?
His appearance torque strength, I do not like the adjustable feet inprecis ..
- Have you tried many other models before buying it?
I try technics 1200 mk2 gemini itt, reloop RP500, stanton t50
- How would you rate the quality / price?
very good value for money technics That a cheaper and offers more options
- With experience, you do again this choice? ...
I refer without hesitation, although he needs to take a long time, being careful user I'd be surprised ...
I put 9 because the felt is provided and average surtt available when changing the pitch and the screw holes buttons n'on not been correctly calculated, but is arranged by tinkering ..

Hi all I have 2 numark ttx Posed mnt since 1 year and I am sorry to anounce ke n I have not a single seed with u (I speak for biensur coconut ki ki ... ttx critics in general are the techincs purist) ...
I mix in a club and I took my plate tt the weekend (in fly box of course) over the week so tell that ke I mix at home with at least 25 hours a week to mix it fe 100 hours of mix by me and as I have the past year I imagine that Be fe already more than 1000h and mix with any bug or seed ... While not tell me ke c unreliable!
fet it in a year and a half of day had techincs Mk2 (ki sound of platinum be reliable in May in the rustic type c on top) and a friend di me come test the sound of platinum ki j ttx at the beginning of props not be ... May I have the I kan eseyer I fall in love and I've sold my mk2 ke 2 j'd buy me new 6 by ttx Advent resume .... So much for history ...
For those ki Veulen Calita the functionality of the precision the aesthetical profesionally Be No I did something that has to tell you buy 2 ttx and we'll talk about ...

Numark for a fe be the same for I di chapo!

- How long have you use it?

It's been six months that I mix with

- What is so special that you like most and least?

What I like most, the engine power the digital display which allows for a visual on the pitch, I like the least? Well ... nothing! Platinum remarkable little easier to compete with giant technics, the only "default" is a long-term view in terms of electronic (very present on this plate)

- Have you tried many other models before buying it?

Much either, the classic Technics SL-1200 mk2 and other low-end.

- How would you rate the quality / price?
Good value less than the technics is equivalent in quality

- With experience, you do again this choice? ...

Without hesitation!

- How long have you use it?

For nearly three years that I mix on ttx usually two hours a day and sometimes more. They went out several times in the evening and sometimes shot over 20 hours affillée without showing any sign of weakness.

- What is so special that you like most and least?

Assets:
The couple ultra powerful, ultra-stable platform, pitch can not be more specific ...
Cons:
the stage has existed for "little" nobody has ttx for 10 years and thus can not judge their longevity

- Have you tried many other models before buying it?

before I had the opportunity to test mk2 M5G stanton I know that, and of pdx vestax.
for me only vestax approach the quality of ttx.
We did very well to say anything you want on technics turntables but these comparisons do not address the characteristics of the ttx

- How would you rate the quality / price?

Bought 3 years ago they were about € 420 each so the value for money is more than satisfactory for me
- With experience, you do again this choice? ...

unhesitatingly

- How long have you use it?
2 or 3 years. 2 hours use daily at the beginning and less often now.

- What is so special that you like most and least?
glop:
-Stability of the arm
-High torque
-The display of the pitch
-The ability to swap the location of the pitch and buttons
-Drawings on the edge of the plateau do not pull the fingers (unlike the technics)

not glop:
We can improve can be held at the crease with Shure M44 / 7. The jump is consistent scratch a little bit.
-Pitch can be improved
Them start / stop (well thought out and many two: that's cool) are a little cheap to the touch
It is very heavy
-I have an engine that makes every little bit more noise than the other but you have to listen and it does not get worse then j'men tape.

- Have you tried many other models before buying it?
stanton, technics, gemini pdt 6000, the bst of crap, of numark belt drive, then cd turntables technics of sldz of numark cdx and.

- How would you rate the quality / price?
good

- With experience, you do again this choice? ...
not now but it was a good investment anyway. I go to one controller + Vestax PDX 2300.

The features on this deck include the most torque available on any pro dj deck. That means its starts, breaks, slows down, and speeds up faster than a technic 1200. Speaking of speed there is a 50% pitch adjustment. Most people would not care about this but combined with its key adjustement feature this deck is awesome to cross blend music genres like house and hip hop, jungle and house etc. You can also change the key of a song while maintaining the original or altered tempo. This means you can give a a lyricist with a high pitch voice a deep voice and still be able to mix there song at the original speed. The deck also features lineoutput, phono output, digital out put, interchangeable tone arms, beat counter, weighs a ton so its not susceptible to skipping due to vibration, and a bunch of other shit thats dope.

Price paid

$379

The deck sounds aweome. The only thing i dont like about it is that it weighs a ton so carrying them around is a drag. Also, when scratching you have to lower the bass a bit more than you would normally on a technic so you dont hear the thump of your hand as it grabs the vinyl.

The ttx1 is mad easy to use. The only thing you might need the manual for is to figure out how to adjust the key.

Robust is an understatement. This deck appears to be a tank. Don't worry about a wobbly platter, this baby is crazy stable. Of course, these are just my opinons based on my own personal experience. Still i would encourage people looking for some pro quality turntable to check these out.

The turntable is plain and simply ill. Technic purists won't here it but if your not a 1200 snob and want more features from your deck than tech has to offer, you'll want to check it out. Its been awesome in the studio and on the road. I guess in time we will findoout how fat this deck really is, but in the mean time it offers everything tech offers and then some. And at onlly $379 you cant go wrong. PS: Numarks PPD01 Mixer sucks ass, but thats another review. Peace. E

Originally posted on FutureProducers.com
Posted by: Unknown ( 4-, 2003)

This has all the features you could want. Everything on it I have found useful, except the BPM counter which I never would use anyways, but it is definatly off. Does it effect the rating though? Not at all. This table is still dope. the pitch adjust is very accurate and surprising very useful, especially if you drop it down on the right track and want to get a nice bass boooom. Reverse has been useful for scratching as is the interchangable tone arms. I use the straight when scratching and if playing over a beat on another record I use the s tone arm. People talk about the record wear and sound quality of a straight arm causing problems, but I don't notice a considerable amount of difference in this, and if your a scratch dj you are definatly not afraid of record wear.. you can't treat them like babies ya know? This deck has the perfect features tho... I sold my techs after getting this. There is nothing missing.

Price paid

400

Perfect, no problem what so ever. Unlike the PDX2000, I think this turntable could be universally accepted by turntablist and mix dj's because of the tone arm system. Most mix dj's may not find as much use for the features (still some would be handy) as a scratch dj would, but it is cheaper and built stronger then techs, so why not give it a shot?

Very easy, very ergonamic setup. It has been made so that it works perfectly for someone using it battle style or tradional style. The manual reads very easily and explains things nicely.

I have lugged it around and unfortunatly even dropped it about 3 feet once, it freaked me out, but it had no damage. It is a metal table like techs, but powder coated on the outside so it doesn't get scratched as easily as techs. It is even heavier then a techs which some people may not like but I have no problem with it. It is a tank. I've never had to contact customer support. Only beef is the target light could have been brighter, but i changed the light and now its fine.

I loved it enough that after buying one (because I was skeptical) and abusing it for several months I sold my other 1210 (no need for them now) and bought another ttx1. This table has everything a tech has and more, and a better price. I personally think it is the best on the market right now. I don't think anyone can go wrong with a 1200 or a pdx2000, all are good tables, but if your innovative and into scratch music then the pdx is far better then a 1200, and if your into mixing the pdx falls short because some people are skeptical of it being plastic, have heard of it having a wobbly platter, and also has only the straight arm. The ttx1 fits perfectly in the middle of this. It has the best of both worlds AND some with the extra features. i love this deck... i don't think i'll ever need a new table again.. but i am still open to try new things so who knows...

Originally posted on FutureProducers.com
Posted by: Unknown ( 5-, 2003)

The TTX has more features than all other Turntables that I have come across. The auto BPM is a bit touchy and doesn't always work.

Price paid

$650 usd

The sound that comes out is Great, I haven't found any better Turntable

The manual..... has almost nothing, The interface is amazing however, and easy to use. Since this turntable can be adjusted easly it is good for any one

It is good enough to be used anywhere! The lights underneath make it easy for hookin up in a dark warehouse, or club. The buttons are easy to use, however the brake and start up speed knobs are too close to the start/stop buttons

I will never go back to Tech 1200s after using this, Its amazing!

Originally posted on FutureProducers.com
Posted by: Unknown (January 1-, 2003)