Genelec 7050A

Genelec 7050A

  • Like
  • Tweet
  • Pin it
  • Submit

7050A, Active Monitor from Genelec in the 7000 series.

2 user reviews
Find it in the classifieds starting at $560 Avg used price: $528Warning, this average price is older than 6 months
Price engine
Classified Ads

Genelec 7050A tech. sheet

  • Manufacturer: Genelec
  • Model: 7050A
  • Series: 7000
  • Category: Active Monitors
  • Added in our database on: 02/17/2004

We have no technical specifications for this product
but your help will be much welcomed


Genelec 7050A user reviews

Average Score:4.5( 4.5/5 based on 2 reviews )
 1 user review50 %
 1 user review50 %

minimumvital's review (This content has been automatically translated from French)

Genelec 7050A
Active subwoofer designed for use with speakers including local 1029.


The bandwidth is roughly 20 to 80 Hz is therefore below the low in question here. This is normal, small GENELEC 1029 which is designed this well stopped short at 70 Hz

Once the system is installed with the 1029, I wondered how I could do without the box for so many years. While it is possible to mix with the 1029 without the box (I made several albums like that), but avoiding to touch absolutely everything that was going on below the fateful 70 Hz, as attention to surprises in!

So, I got very homogeneous mixes, but not very generous at the bottom, requires caution.

With the housing 7050 is much better, you can work in the lower remaining aware of what we do, which is especially important that these frequencies are critical to the overall sound (the 'envelope ") of an album.

Be careful though, this "more" in the bass must be balanced precisely with local speakers, this is not to be mistaken for a DJ with cabbage ears. The box should be set to just make this little "belly" at the bottom which is essential to properly adjust a drum (for an example), then: not too strong.


Overall, this is an excellent complement to small GENELEC.

I would put all the same two flaws:

First, the price is prohibitive. For my part, I bought used (but nine in fact) with AF at a price that I consider correct (E 500).

Then I find that the power is unbalanced (ie insufficient) compared to that of local speakers. Clearly, I must limit the volume of incredibly small speakers, and push the box at the bottom to have a coherent balance between the sub and speakers say, then increase the output level of the table accordingly.

On arrival, the overall sound is very good, but with this rebalancing. On the other hand, it avoids ending up with a configuration where the sub would be too strong compared to the speakers (see review above).

Michou91's review (This content has been automatically translated from French)

Genelec 7050A
The bargain price (400 euros to buy a friend!)

I use with 8030A, which are connected to an RME Multiface.


Firstly, the sound is exceptional, but only 38Hz to 20kHz. Under no circumstances does this well down to 20 Hz (as specified in the previous assessment).

No need to push hard to have her look good. The sound is extremely detailed with 8030. Too bad that below 35Hz, it is the nothingness ...


I used it for 6 days!

I could test and listen to many active wells (Yamaha, InFocus, JMR, Cabasse, Adam ...), but none are as accurate in the lower spectrum. Except perhaps the Focal pro but at what price ...

Level value for money, to 755 euros, it is better: 7050B !!!!! Otherwise, hand or stocking (if still possible), it's a great purchase, which has few competitors. Excellent sound

Genelec 7050A images

  • Genelec 7050A
  • Genelec 7050A
  • Genelec 7050A
  • Genelec 7050A

Discover other products!

Other names: 7050 a, 70 50a, 70 50 a

Cookies help us improve performance, enhance user experience and deliver our services. By using our services, you agree to our use of cookies. Find out more.