jubjub « Beautiful, strong, reliable »
Published on 11/08/13 at 14:41I was looking for a sound card with multiple inputs, reliable and a higher range.
I use it for recording vocals, acoustic and electric guitar, and my samplers
(And mixes!)
It is interfaced with a PC Motherboard Asus Quad core 8GB Ram windows 7 pro.
I takes only 8 because it does not have a MIDI interface.
UTILIZATION
The drivers are stable, there is nothing to say except some crashes when I turn on the compressor and / or external preamp. Just turn it off and restart (a 10aine seconds).
I use Cubase5.
Next record, I record one track. Mic, guitar, samplers and MIDI tracks.
Side reading, 20, 30, 40 tracks and more.
I have a latency of 12ms. I never really set this option. 12ms is the last proper limit and it suits me.
I put 8 because the drivers are not updated, the Hybrid is preferred.
But they are stable.
GETTING STARTED
Quick installation and trouble-free!
Setup is simple, you just understand the CueMix (software management inputs, outputs, EQ, Compression, and effects for each track), but it's fast.
No inconsistency, I had interfaced with a Tascam FW-1082 on its second Firewire port: no problem.
OVERALL OPINION
I love its appearance, beautiful and strong. The master volume knob is a bit small, and as I often used my fingernail has etched a little facade, so more paint near the volume button. I intend to take a case management monitoring to mute the output with a volume button.
The Main Output and Headphone volume management is not terrible, the headphone output is connected to the Main Out 1/2. So, if I want to use THAT headphone, I must turn my monitor speakers. (Or so I missed a config routing in CueMix? Send me a message if you have a solution
)
Before I had a Tascam US-428 (beautiful blue) and a FW-1082. I wanted more inputs, better converters, m ^ me if those are the Tascam respectable, and a rack-mounted.
Side converters, nothing to say, no breath, transparent.
It lacks an interface MIDI.J 'I had to get an external USB, from M-Audio.
I use it for recording vocals, acoustic and electric guitar, and my samplers
(And mixes!)
It is interfaced with a PC Motherboard Asus Quad core 8GB Ram windows 7 pro.
I takes only 8 because it does not have a MIDI interface.
UTILIZATION
The drivers are stable, there is nothing to say except some crashes when I turn on the compressor and / or external preamp. Just turn it off and restart (a 10aine seconds).
I use Cubase5.
Next record, I record one track. Mic, guitar, samplers and MIDI tracks.
Side reading, 20, 30, 40 tracks and more.
I have a latency of 12ms. I never really set this option. 12ms is the last proper limit and it suits me.
I put 8 because the drivers are not updated, the Hybrid is preferred.
But they are stable.
GETTING STARTED
Quick installation and trouble-free!
Setup is simple, you just understand the CueMix (software management inputs, outputs, EQ, Compression, and effects for each track), but it's fast.
No inconsistency, I had interfaced with a Tascam FW-1082 on its second Firewire port: no problem.
OVERALL OPINION
I love its appearance, beautiful and strong. The master volume knob is a bit small, and as I often used my fingernail has etched a little facade, so more paint near the volume button. I intend to take a case management monitoring to mute the output with a volume button.
The Main Output and Headphone volume management is not terrible, the headphone output is connected to the Main Out 1/2. So, if I want to use THAT headphone, I must turn my monitor speakers. (Or so I missed a config routing in CueMix? Send me a message if you have a solution
) Before I had a Tascam US-428 (beautiful blue) and a FW-1082. I wanted more inputs, better converters, m ^ me if those are the Tascam respectable, and a rack-mounted.
Side converters, nothing to say, no breath, transparent.
It lacks an interface MIDI.J 'I had to get an external USB, from M-Audio.