Peavey PV 231EQ

This is a 2x31 band equalizer.
Low cut filter per channel.
High cut filter per channel.
Output gain + /-10dB per channel.
Vu-meter by 4 LED (Attention dja saturates the 3rd LED).
Bypass through.
Switching + /-6dB + /-12dB on qualisations through.
Cut earth / ground the rear.
Connection between output and XLR symtrique / assymtrique only.

UTILIZATION

Mode + /-6dB was in Ralite 5 /-7dB
Mode + /-12dB was +9 /-10dB
When you spend bypass qualisation (all sliders perfectly 0dB) is 3 dB?? In addition to the bypass action of the sliders frequency drives the effect of the 0-3dB. So it's a bypass. So, we have to be careful, otherwise it is quickly broken head. Is what may be one of my default qualiseur ...
Otherwise it is very simple to use. The user's manual is even simpler.

SOUND QUALITY

It adds a "good level" of noise in Gnant faade but acceptable in return.
Since it is not prcis, it is hard in trs out a good sound. When the GLR (1 hour mninmum), it does not touch more.
This quality is due not a minimalist design and manufacturing. The transformer does not ring and the mounting brackets are dja PForm by transport (nine stuff), provided they do not break. That's when the China Montas, cd, solder flux left on the PCB capacitors + Traditional lying on other components (so in my case loss of earnings + saturation + mutes), tablecloths montes partly sodas / glues, screws, not the bottom so the screws vibrate cards.

OVERALL OPINION

Small hardware.
But for the price (between 120 and 180 euros nine), is a band especially for a 2x31.
I advise a buyer to not turn it on without having to disassemble the ntoyer solder flux on the cards and recover all capacitors. Attention back towards the rear of the cover 2, a 2 year old fairs.