Log in
EN
FR

SeriesMarshall ValveState 2000 AVT

10 products found

Filter
Sort by
Evaluation
  • Reviewed or not
  • Editor’s award
  • Reviewed by Audiofanzine
Availability
  • Available or not
  • Sold new or used
  • Sold new
  • Sold used
Must-have products
  • All products
  • Flagship products
  • Best rated products
  • Hot products
  • Popular products
Price
  • Freeware
€
Clear
Sort by
  • Popularity
  • User ratings
  • Price - low to high
  • Price - high to low
  • Used price, increasing
  • Used price, decreasing
  • Name (from A to Z)
  • Name (from Z to A)
  • Added on
Sort results
  • Popularity
  • User ratings
  • Price - low to high
  • Price - high to low
  • Used price, increasing
  • Used price, decreasing
  • Name (from A to Z)
  • Name (from Z to A)
  • Added on
Filter results 10 results found
Evaluation
Availability
Must-have products
Price
  • Freeware
Show results

The best Marshall ValveState 2000 AVT reviews

The reviews Audiofanzine members found the most helpful.
  • « Just junk »

    This amp is pretty much just junk. Marshall seems to put out these low end cheap amps and rotate the model numbers every few years or so. They have since discontinued this amp and think is replaced by the MG series amps. If you are simply going for a practice amp that will be decent at low volumes and allow you to just get your chops and technique down then this is a great amp for that. This is in no way a gigging amp or a stage amp of any kind. UTILIZATION Output (RMS): 50 watts Impedance: 4 ohms Speaker: 1 x 12 in. #Channels: 2 Acoustic Simulator: No Digital FX Section: No FX Select Switch: No Accutronics Reverb: Yes FX Loop: Series FX Level Switch: No FX Mix Controls: No Scoop Switch: No Bright Switch: No Emulated Line Out: Yes Headphone Jack: Yes Master Volume: Yes Presence Control: No Speaker Outputs: 1 (int./ext.) CD Input: Yes Footswitch: PEDL-10001 included Dimensions: 515 x 554 x 259mm Weight: 18.6 kg SOUNDS This amp has the classic Marshall/British distortion. You can play this amp at very low volumes and with the headphone jack be able to silently play in your home or office without interruption. Any guitar will sound fine with the amp. I prefer a nice Gibson Les Paul with Marshall amps as they seems to fit sonically together very well. Even a good Fender Stratocaster will sound too. It just depends on the mood whether or not you want to get a fat sounding distortion tone or a sweet Jimi Hendrix Strat tone with the single coils. OVERALL OPINION These amps are not being produced anymore and so the used market is the only option at this point. I have no idea what they are going for these days in this market. I think with the hybrid technology with solid state and tubes give this amp a step above the all solid state amps, but it still doesn't get that real tube punch. I would recommend this amp to someone who needs a good practice amp and doesn't want to spend a lot of money doing it. It has an emulated direct out so if you wanted to use this to record you can or even run a line directly to the house PA system. Not sure how that would sound but worth a shot I guess.

  • « I use this amp daily!... But It's not a tube. It's a solid state »

    Marshall's Avt275 is a "ValveState" amp. "ValveState" is a cool word for an amp that has a valve pre amp and a solid state power amp. Basically, it is just a solid state that sorta-kinda-almost-sometimes emulates a tube amp. It has a clean channel, two overdrive channels, and an acoustic simulator channel. It is equipped with a multitude of built in effects ranging from a couple of reverbs to flange and chorus. It pushes 75W through each of the 12" speakers and it also has an "Emulated Line Out" that supposedly emulates the sound of the amp if you ever have the need to record it D.I. UTILIZATION The amp sounds great. Period. My favorite thing about it has definitely been the versatility. The clean channel is fabulous. It sounds delicious. It captures the tone and dynamic that you are looking for - no matter what you are looking for. From twangy blues to flat clean rhythm, the tone can be found. It is pretty incredible. Both of the O.D. channels are usable. The first overdrive channel can give more of that old school crunch and classic Marshall Sound. The second O.D. is much heavier and I rarely use it. It can get out of hand very quickly. It easily becomes muddy and silly. BUT... As far as tube-like sound is concerned... The amp absolutely under performs and will absolutely disappoint you. The acoustic simulator is a joke. Don't even bother. I have to give it a 9 in the Utilization category because of the versatility. I have used this amp on Punk records, blues records, indie, and reggae. It is a solid choice no matter what it is doing. The idea that it was supposed to be a decent substitute for a tube amp is ludicrous. Luckily, I bought it when I was so young that I didn't know the difference and therefore had no prejudice towards the claim. If you want a tube amp then just get a tube amp. SOUNDS I primarily play a Schecter Diamond series. It has a pick up and a humbucker, both are Duncan. It is a fantastic guitar but it has been through hell. The plates for the control knobs are noisy and useless because of my need to quickly repair it with a sauntering iron. It doesn't make sounds unless all of the knobs are all the way up. Hence my surprise at the AVT275's versatility. The Clean channel is perfect. O.D. 1 is good. O.D. 2 is usually silly. The Acoustic simulator is useless. The built in effects are actually O.K. but you will have to dial them in to the point of questioning whether or not any of them are really worth the time or effort. I did a review on this amp a while back and I spent a whole lot of time talking about the "Emulated Line-Out" that is on the back of the head. All that you really need to know about it is that you should just be miking the cab. It is basically just another headphone output and it sounds nothing like it claims. Without the twin Celestion speakers to shape the sound, everything falls apart. Again, being able to control the sound as much as you can with this amp(without using stupid effects), is truly fantastic. But, all of the cool toys and gizmos and gadgets basically add up to nothing more than a waste of space. It sounds great. Just remember that it is an amp- not an effects station. OVERALL OPINION Pros: -Extremely versatile -Can take a beating like a Marshall should(and probably will) -BEAUTIFUL clean channel -I noticed that it was one of the amps on stage at the end of School of Rock Check it out: https://www.youtube.com/watch?v=fvLg4v_nPO4 Right behind the guy with the Flying V. Cons: -Silly toys and effects -Acoustic simulator is just nonsense -Sounds almost nothing like a tube amp -Unusually heavy for it's size As far as the price goes, you should definitely buy it used so that you have a chance at a reasonable deal. I am not sure whether they even make these anymore so it might be your only option. I see one on Ebay for $500. Considering the Clean channel and the versatility and the power(yes, it's frickin' loud), that is a reasonable price. I use this amp every single day.

  • « Flexible and quality sounding amp »

    The Marshall AVT150 amp utilises 'Advanced Valvestate Technology' which basically means it's a combination of a valve/tube amp and a solid state amp. It delivers 150watts of power and has connections for an external footswitch, 2 external speaker inputs, a line in and an FX send and return insert section. In terms of controls, effects and settings, this amp head gives you plenty boosting 2 rows of 12 knobs controlling 4 different channels which are selectable via the footswitch. These range from the usual bass, middle and treble through to DFX mix and adjust for the digital effects section. The 4 different channels to choose from are Acoustic Simulator, Clean, Overdrive 1 and overdrive 2, these are also available on the footswitch as well as are 2 buttons to switch the FX section for Acoustic simulator/Clean on and FX section on/off for Overdrive1/overdrive 2. Along the top row of knobs/controls are the OD1 and OD2 section which are controlled by the same EQ knobs. (bass, middle, treble) and along the bottom row of knobs/controls is the acoustic simulator/clean channels which is controlled by the same (but separate from OD1 and OD2) EQ knobs. UTILIZATION The manual is very detailed but not overwhelming for this amplifier. Marshall know guitarists as good as anybody having been created amps for legends such as Jimi Hendrix, Pete Townsend and Slash, so they know how to put a decent manual together without making things difficult to figure out like some other companies do from time to time. It clearly explains how to set up the amp for any situation, using the FX send and return section, adding additional cabinets, how each channel works and about the built in digital effects section. It is very easy to get a good sound from this amp in fact it's harder to get a bad sound from the amp in all honesty, the manual even explains the inspiration for each channel and some recommended settings to dial in to achieve certain tones from famous bands/guitarists. SOUNDS This Marshall can produce a really good tone, especially the overdrive/distortion 1 and 2 channels. The acoustic simulator is very impressive, the only thing i have heard that beats it is the Boss acoustic simulator pedal but the avt150's is very close indeed, especially convincing on single coil pickups on guitars like the Fender Stratocaster, plus there are controls for the 'top end' and 'body' so you can dial in your perfect setting for the Acoustic simulator. The clean channel in my opinion doesn't quite live up to the other channels, it is still perfectly usable but i've found on Les Paul and Gibson guitars it can sound quite muddy and not cut through the mix well live, however if combined with certain effects such as the chorus effect then it can be more flexible, but a better option for a clean sound from this amp would be to use the overdrive 1 channel and have a very low setting on your guitar's volume pot as in 1 or 2. Moving onto the Overdrive channels, OD1 is more of an 'old school' crunchy type of distortion with more of a high mid range bite to it. Very flexible when used in combination with your guitars volume and pickup selectors. You will achieve a nice smooth bluesy tone with the neck pick up, and a driving rock sound from the bridge pick up as you might expect. On the gain control, as a rough guide - a quarter will give you a jangly indie rock tone, half way will give you AC/DC, about 3/4 of gain will give you Guns N Roses and up full will present you with a 'Ride the Lightning' style Metallica sound as described in the manual preset, and to go along with this you will need to press the 'scoop' button in which takes out the mids of the tone leaving you with more bass and treble and an overall aggressive sound that actually reminds me more of the 'And Justice for All' album guitar sound also by Metallica. The OD2 channel was designed with modern metal in mind, mostly aimed at the Nu-Metal crowd of the early 2000's, and when combined with the scoop switch button (separate from the OD1 channel scoop switch) can produce heavy and brutal sounding results that suggest Slipknot, Korn, Hatebreed and nowadays Slayer. Although with that said it is definitely not pigeon-holed in that genre, having the scoop switch unpressed and the gain set at a nice halfway-3/4 point will give you a great solo tone that has a dominating, thick mid range punch that can bully it's way through the mix to shine through. This setting on a dual humbucker guitar always reminds me of the guitar solo in Crazy Train by Randy Rhodes. When combined with the footswitch and the OD1 channel, you can use this to great effect when playing live, dial the OD1 for crunchy rhythm and then set the OD2 to have more gain and volume to switch to for blistering lead parts or even a louder 'Chorus' distortion setting is a lot less hassle than having a load of pedals with power adaptors and cables etc on the floor to have to switch to. The digital FX section is a highlight of this amp, and it is utilised very well with no 'cheap' sounds to be found anywhere. It has a lot of different reverb settings to choose from such as hall, room, gated and plate, which can all be tweaked with using the 'adjust control' and then subtly or not-so-subtly blended in with the dry signal using the DFX mix control knob. This method can be used for the other FX such as chorus, flanger, modulation, and delay. Set right, the flanger can be very effective for a 'Hotel California' type effect, the delay also sounds great and is a personal favourite for the overdrive channels along with chorus on the clean channels. The FX do not have the same degree of options as say a dedicated pedal would do, but you would need a spend a great deal on each pedal to get the same basic quality as the FX on this Marshall, a fantastic addition and big selling point for this amp. OVERALL OPINION To sum up, The Marshall AVT150 amp head and AVT150A cabinet are a great combination of quality, flexibility and value for money. The tone is very good, although a true Marshall valve amp will better it in this sense but at more of a cost and with much less built-in digital effects. Compare to other manufacturers take on the same type of amp with built in effects such as Crate etc, the Marshall AVT150 wins hands down. So if you have the cash and a large guitar pedal board already and need the best Marshall valve/tube sound possible then i would probably recommend you look at some of Marshall's more expensive 'All valve' offerings. However, if you can live with a valve pre-amp and flexibility for playing live and budget are part of the equation when choosing your next amp, then i would strongly recommend you look no further and definitely try this out.

  • « Marshall AVT 100 »

    I bought this amp at Sam Ash Music for $659 because I needed an amp that I could do small gigs with. The sound is good, when it works. I play a Strat, and I can get pretty good Marshall/Strat sounds out of it (Jimi, etc) considering it's a valve amp. You can get a nice dirty blues sound out of channel 1 and the onboard reverb sounds are very usable. You can get a really nice bluesy sound out of it with dist. channel 1, but I couldn't get that nice screaming lead sound that you need to really rock out. I found channel 2 is useless unless you're playing metal power chords or something muddy. Also, you can only select one on-board effect at a time, so you can't for example choose a reverb setting + delay or chorus, which is annoying. The Boss petals I have are much more adjustable and sound better than this unit's effects. I only used the reverb settings regularly. I don't know whether or not I just ran into some bad luck with this one or if they all suck, but after two months it crapped out--I couldn't play it at more than 1/8 max volume without it popping and crackling. I sent it in for repair, and when it came back (6 freakin months later!) it broke again after 2 weeks. I didn't even play through it that much or anywhere near gig volume during that time. I met a guy who had the same problem with his AVT10, so I'm pretty sure its not just me. For sound quality, I'd give it a 4. For diversity of a sound, I'd give it a 3. 'Cause it keeps breaking, nothing else really matters. Don't buy one. This review was originally published on http://www.musicgearreview.com

  • « Marshall AVT20 »

    I bought this amp in Colorado Springs about a year ago from Pro Sound music for $279. I originally purchased it to use for rehearsals and recording. I love the portability and the absolutely awesome tone of this little amp. The range and depth of tone is really remarkable for an amp of this size and price. I have since been using it at small gigs and some larger rooms with a lot of success. Nobody can believe that this amp is producing all of that sound. Wish it had channel switching and was quiter in the gain mode. It is really noisy with the gain switch on. The construction is like every other Marshall I've ever owned--SOLID ! Quality is way above the level you would expect for under $300. All in all, if you need a small amp for small gigs, rehearsals or recording use and still want that Marshall tone, go buy this sucker! Oh, the DI is speaker emulated, so you can go straight to the board or snake ( it works nicely I might add as I have used it on a bunch of gigs ) and the headphone jack is nice for working out parts without disturbing anyone at 2 am. This review was originally published on http://www.musicgearreview.com

  • « Marshall AVT50-Head »

    I paid about $450 for this at a local music store. It came with a footswitch and tone that kicked my ass. Just about everything! Both the clean and OD channels rock. The clean channel is suprisingly good far a half solid state. It has a pretty good amount of warmth, and sisnce it doesn't push a cab as hard as a 100W head, it has really good headroom. Then, there's the sweet, sweet distortion. The tube preamp makes an awesome OD sound that is extremely versatile. You can go from soft blues licks to skull-crushing death brekdowns in the crank of a knob. The reverb is pretty good, but I don't really like using it (personal preference). Since it has a headphone jack, you can practice without bothering anybody else. Awesome amp. Since it's only 50W instead of 100, you don't get quite the chest-pounding volume out of it. But it is definitely loud enough to gig with and jam with. Also, it takes forever to warm up. I'm not sure why, but a JCM 2000 TSL100 boots up in about half the time this one does. The tone controls aren't 100% expressive, either. They work really well but not quite like a full tube amp. Everything is amazing about this amp. It's built perfectly in the Marshall tradition. It's impossible to fuck this thing up. I recommend this amp to anyone who wants a very good gigging amp with tons of tone. (That would be all of us.) The price is really good, and with a good cab, the tone is outstanding. Whatever you do don't get the combo version. It deosn't sound half as good as the head. No matter what kind of music you play, this amp can suit you. It's practically flawless. Go buy one ASAP. This review was originally published on http://www.musicgearreview.com

  • frankP_en's review

    The Marshall AVT412 200W 4x12 Cabinet. Handles a lot of power and tone. I've had my cabinet for 6 months now. They are discontinued now. It always seems like the stuff you just buy, becomes discontinued. Either way, a very good, dependable cabinet. The AVT50H and AVT150H heads provide a solid punch and tight low-end response. I have this cabinet hooked up to my AVT50H head and my CrateGX412 cabinet. Together, they make a powerful sound. The Crate handles more of the mids/highs, while the marshal puts out the lows/mids. Hard rock/metal would be perfect for this design. I'm a mainstream radio hard rock style musician and if you want to buy a nice, not as expensive as the Marshall 1960TV Cabinet, you can get that nice tone and recording standard for mainstream artists. I wouldn't use this cabinet alone but with the Marshall 412B, it might be a killer package. The mg100hdfx head would work with his cabinet also, but it's not as good. That's the cheaper model for the youth musicians in high school. I've tried out the Marshall MG412A or MG412B 120W 4x12 guitar extension cabinet, running on 8ohms and 120ws. I didn't like that either. No switch to 4ohms to 8ohms, but neither does this cabinet. It has 4 12" speakers built in. You can place the head right on top with the groves (helps a lot with mega bass, keeps from sliding). It has one input and output in the back. The handles handles on the side help out and have a slick look to them. I find cabinets at different prices interesting. Take this cabinet for example and pair it with the Marshall 1960TV Cabinet. Around $1000, but only has 100w max. How do you figure that? Buy this Marshall cabinet with 200w or get one with 100w and pay double. The difference is the electrics, not the watts. You'll get a much better tone out the Marshall 1960TV Cabinet. If you want to rock and produce big tones and blow your ears, get this. $500 out of stock. Go to your local retail and see if they still have one in stock. I like the head and have always wanted to pair it will the cabinet. Now that I have that, it rocks. I would make the same purchase again but at a lower price. When the product is discontinued, cut the value way down.