Dual A/B Switch AB200 classified ad
New ad alertImages
Reviews
1.8/5(7 reviews)
14 %
14 %
57 %
Write a user review
ba ducPublished on 10/16/06 at 06:23 (This content has been automatically translated from French)
So that's one that works without problem?
thank you to answer quickly because I have to buy one, see 2
thank you to answer quickly because I have to buy one, see 2
00
»
SlapKidCorrect, useful
Published on 04/19/13 at 14:53 (This content has been automatically translated from French)Luckily I had not read the reviews before buying ... I would not dare!
I use my AB200 abc box on a pedal board so three channels.
The power supply, solved with a standard jack connector fiche9v boss who queue on the powerblock the pedalboard.
So I go live with the guitar, and I go on A compressor B + overdrive distortion delay1 C + delay2
Outputs 3 chaining go on a general Powermixer with reverb and EQ per channel 2bd, I plug in a box 212 or other output. Relatively high volume.
No buzz or breath from AB200, no switching noise either.
I led a lame, but fluke it was not useful to me in this configuration.
Not seem to lose signal, and the sound is correct.
Short to dwell...…
I use my AB200 abc box on a pedal board so three channels.
The power supply, solved with a standard jack connector fiche9v boss who queue on the powerblock the pedalboard.
So I go live with the guitar, and I go on A compressor B + overdrive distortion delay1 C + delay2
Outputs 3 chaining go on a general Powermixer with reverb and EQ per channel 2bd, I plug in a box 212 or other output. Relatively high volume.
No buzz or breath from AB200, no switching noise either.
I led a lame, but fluke it was not useful to me in this configuration.
Not seem to lose signal, and the sound is correct.
Short to dwell...…
Read more
Luckily I had not read the reviews before buying ... I would not dare!
I use my AB200 abc box on a pedal board so three channels.
The power supply, solved with a standard jack connector fiche9v boss who queue on the powerblock the pedalboard.
So I go live with the guitar, and I go on A compressor B + overdrive distortion delay1 C + delay2
Outputs 3 chaining go on a general Powermixer with reverb and EQ per channel 2bd, I plug in a box 212 or other output. Relatively high volume.
No buzz or breath from AB200, no switching noise either.
I led a lame, but fluke it was not useful to me in this configuration.
Not seem to lose signal, and the sound is correct.
Short to dwell in this pedalboard switcher that the poor did a good job taking up very little space.
Given the previous opinions knock on wood that it does not fall in the road!
I use my AB200 abc box on a pedal board so three channels.
The power supply, solved with a standard jack connector fiche9v boss who queue on the powerblock the pedalboard.
So I go live with the guitar, and I go on A compressor B + overdrive distortion delay1 C + delay2
Outputs 3 chaining go on a general Powermixer with reverb and EQ per channel 2bd, I plug in a box 212 or other output. Relatively high volume.
No buzz or breath from AB200, no switching noise either.
I led a lame, but fluke it was not useful to me in this configuration.
Not seem to lose signal, and the sound is correct.
Short to dwell in this pedalboard switcher that the poor did a good job taking up very little space.
Given the previous opinions knock on wood that it does not fall in the road!
See less
10
»
lpourcelDown to débalage!
Published on 09/10/12 at 09:53 (This content has been automatically translated from French)Pedal purchased and tested immediately: it is already difficult to insert without a battery screwdriver. After finally figured out how to open it (the manual gives little explanation) without destroying everything, first try. One of the LEDs does not light. So back to the store who wants to me to take another different brand. (Luckily I had not purchased online)
For 4 euros more I ordered the BOSS AB2 which only supports 2 inputs but that seems to be much more reliable.
For 4 euros more I ordered the BOSS AB2 which only supports 2 inputs but that seems to be much more reliable.
20
»
ptibidoPublished on 06/28/06 at 07:55 (This content has been automatically translated from French)
ZrO reliability!! That's twice that I change because after 2 weeks of using the LEDs do not work! it's cheap but it's worth nothing unless you can do without the lights.
20
»
Tech. sheet
- Manufacturer: Behringer
- Model: Dual A/B Switch AB200
- Category: Pedals/Controllers
- Added in our database on: 01/20/2005
We have no technical specifications for this product
but your help will be much welcomed
»
Manuals and other files
Other categories in Guitar Amp Parts & Accessories
Other names: dual a b switch ab200, dualabswitchab200, dual a b switch ab 200, ab200, ab 200, duala b switchab200, duala/b switchab200, duala/bswitchab200, dual a/b switch ab 200, dual a/b switch ab200, AB200, AB 200