Not satisfied with those reviews?
Filter
Our members also liked:
Average Score:( 1.8/5 based on 7 reviews )
1 review
14 %
1 review
14 %
4 reviews
57 %
Write a user review
Users reviews
ba ducPublished on 10/16/06 at 06:23 (This content has been automatically translated from French)So that's one that works without problem?
thank you to answer quickly because I have to buy one, see 200- SlapKid
Correct, useful
Published on 04/19/13 at 14:53 (This content has been automatically translated from French)Luckily I had not read the reviews before buying ... I would not dare!
I use my AB200 abc box on a pedal board so three channels.
The power supply, solved with a standard jack connector fiche9v boss who queue on the powerblock the pedalboard.
So I go live with the guitar, and I go on A compressor B + overdrive distortion delay1 C + delay2
Outputs 3 chaining go on a general Powermixer with reverb and EQ per channel 2bd, I plug in a box 212 or other output. Relatively high volume.
No buzz or breath from AB200, no switching noise either.
I led a lame, but fluke it was not useful to me in this configuration.
Not seem to lose signal, and the sound is correct.
Short to dwell in …Read moreLuckily I had not read the reviews before buying ... I would not dare!
I use my AB200 abc box on a pedal board so three channels.
The power supply, solved with a standard jack connector fiche9v boss who queue on the powerblock the pedalboard.
So I go live with the guitar, and I go on A compressor B + overdrive distortion delay1 C + delay2
Outputs 3 chaining go on a general Powermixer with reverb and EQ per channel 2bd, I plug in a box 212 or other output. Relatively high volume.
No buzz or breath from AB200, no switching noise either.
I led a lame, but fluke it was not useful to me in this configuration.
Not seem to lose signal, and the sound is correct.
Short to dwell in this pedalboard switcher that the poor did a good job taking up very little space.
Given the previous opinions knock on wood that it does not fall in the road!See less10 - lpourcel
Down to débalage!
Published on 09/10/12 at 09:53 (This content has been automatically translated from French)Pedal purchased and tested immediately: it is already difficult to insert without a battery screwdriver. After finally figured out how to open it (the manual gives little explanation) without destroying everything, first try. One of the LEDs does not light. So back to the store who wants to me to take another different brand. (Luckily I had not purchased online)
For 4 euros more I ordered the BOSS AB2 which only supports 2 inputs but that seems to be much more reliable.20 
ptibidoPublished on 06/28/06 at 07:55 (This content has been automatically translated from French)ZrO reliability!! That's twice that I change because after 2 weeks of using the LEDs do not work! it's cheap but it's worth nothing unless you can do without the lights.20- couille de baleneauPublished on 10/04/06 at 05:31 (This content has been automatically translated from French)I had this machine there is less than a month (ordered from thomann) and already on his arrival there was a loose connection on a jack. After one hour of use, the green LED does not work. Now it fontion rarely.
I wait to receive the new (replacement thomann) to see if it's family or an isolated case.
It's a shame to have problems with this product because it is superbly useful and better than the boss because he a1, a2, b1, b2.
I am disappointed, I have a behringer equalizer pedal format and I have no problems with ...10 - Virtual Pop BandPublished on 02/08/07 at 14:00 (This content has been automatically translated from French)made three months that I use ... for now, no problem.
the default main thing is food.
disassemble the whole box to put a battery is not great ...
unplug, reconnect the battery to SAVE, not practical ...
a small switch in the housing (in mtal I prcise the way) that would cut the power supply would probably be the solution ... or even do?
if the machine is reliable, sturdy (despite its small size) and versatile.
derrire my synth or on my amp, I just tried everything prs.
the trick really is, as required, to choose the moment of dclenchement (when you press o, o is released throughout the pressure).
This is consistent with what I was looking for my homestudio and a good value q…Read moremade three months that I use ... for now, no problem.
the default main thing is food.
disassemble the whole box to put a battery is not great ...
unplug, reconnect the battery to SAVE, not practical ...
a small switch in the housing (in mtal I prcise the way) that would cut the power supply would probably be the solution ... or even do?
if the machine is reliable, sturdy (despite its small size) and versatile.
derrire my synth or on my amp, I just tried everything prs.
the trick really is, as required, to choose the moment of dclenchement (when you press o, o is released throughout the pressure).
This is consistent with what I was looking for my homestudio and a good value qualitprix trs.
I think buy me an ending for deuxime.See less10 - nouetandcout
Not buy!
Published on 02/14/11 at 13:32 (This content has been automatically translated from French)used about 4H is already off I'll try to get a credit for a boss ...
20
