SRM350v2 classified ad
New ad alertImages
Reviews
3.5/5(7 reviews)
43 %
14 %
29 %
Write a user review
Philippe HélardLess reliable than the V1: the proof in pictures
Published on 08/21/14 at 07:41 (This content has been automatically translated from French)I SRM 350 V1 for 10 years: never worry despite the sometimes hard for them conditions.
I SRM 350 V2 2 years since I've already sent 2 times for repair, both.
Here is a picture of the electronic parts of the 2 versions.
Reducing component quality is obvious. V1 is the Mastock strong. V2 is lightweight and fragile.
I SRM 350 V2 2 years since I've already sent 2 times for repair, both.
Here is a picture of the electronic parts of the 2 versions.
Reducing component quality is obvious. V1 is the Mastock strong. V2 is lightweight and fragile.
93
»
pagofGood value for money
Published on 08/02/13 at 05:54 (This content has been automatically translated from French)J use these speakers for 9 months.
I ve heard some models before making my choice, the sound of MACKIE was very good and sufficient power for my use.
J appreciate their lightness and accuracy.
I think the value for money is very good. Certe it s is not the best 10 inch, but certainly those that offer the best value for money.
I remake that choice without hesitation.
I ve heard some models before making my choice, the sound of MACKIE was very good and sufficient power for my use.
J appreciate their lightness and accuracy.
I think the value for money is very good. Certe it s is not the best 10 inch, but certainly those that offer the best value for money.
I remake that choice without hesitation.
10
»
Nico WuilqueWarning several V2
Published on 06/28/13 at 16:11 (This content has been automatically translated from French)I note that there are several v2. The first two with logo, a top and a bottom and its quality manufacturing are similar to v1. As against to the one with the logo at the bottom is more of Tapco renamed. Its very average, see quite closed ditto for quality.
10
»
SlslehavreI strongly recommend
Published on 10/18/11 at 03:32 (This content has been automatically translated from French)I use srm350V2 3 years, finally I tried to use because after the 3rd exit, two down ...
I bought in 2002 the first version SRM350 (hence the gray), which are very very sturdy machines, and they still look all year round in the rain, sunlight, at full capacity, in the dust ... zero short interest ...
so I wanted to complete my fleet in 2008 by buying the last SRM350 V2, so I was then bought over 600euros memory ttc the piece, in fact departing his most glittering party put forward a medium acute, nothing more to the serious, but for everything else, very poor production, let me explain ...
The material used kind of ABS plastic or the like, very dark blue becomes light blue stripe at...…
I bought in 2002 the first version SRM350 (hence the gray), which are very very sturdy machines, and they still look all year round in the rain, sunlight, at full capacity, in the dust ... zero short interest ...
so I wanted to complete my fleet in 2008 by buying the last SRM350 V2, so I was then bought over 600euros memory ttc the piece, in fact departing his most glittering party put forward a medium acute, nothing more to the serious, but for everything else, very poor production, let me explain ...
The material used kind of ABS plastic or the like, very dark blue becomes light blue stripe at...…
Read more
I use srm350V2 3 years, finally I tried to use because after the 3rd exit, two down ...
I bought in 2002 the first version SRM350 (hence the gray), which are very very sturdy machines, and they still look all year round in the rain, sunlight, at full capacity, in the dust ... zero short interest ...
so I wanted to complete my fleet in 2008 by buying the last SRM350 V2, so I was then bought over 600euros memory ttc the piece, in fact departing his most glittering party put forward a medium acute, nothing more to the serious, but for everything else, very poor production, let me explain ...
The material used kind of ABS plastic or the like, very dark blue becomes light blue stripe at the least ... when I "shake" the speaker, I hear the son of internal connection type against the chassis, after the uses the first two runs out of power (besides the SRM350 V1 were used on the same site in version 4 back in 350V1 srm and V2), so I send it for repair, while it is being repaired, the second goes down to the next exit (for those who have any doubt, always use the V1 at the same time, and on the same stage and same power supply, 1 amp QSC plx1602, a yamaha pc4800 amp, behringer ULTRACURVE 8024 and 2 Soundcraft LX7 console 1-32), after returning from two machine shop, a walk to this day, the second of a sudden more acute compression and a gift so large background noise, but not type buzz 50hz area, rather like blowing very hard, but the serious ...
So is the second in a corner to rot it will probably just keeping empty hp severe acute changed, added a filter, two Speakon and here is a rare model of passive srm350v2 ...
I remain at the disposal of those questions, and am curious to know the opinion of those who have the same version all black, is it the same? because I am still very happy with my V1 and my Mackie CFX20 ...
I bought in 2002 the first version SRM350 (hence the gray), which are very very sturdy machines, and they still look all year round in the rain, sunlight, at full capacity, in the dust ... zero short interest ...
so I wanted to complete my fleet in 2008 by buying the last SRM350 V2, so I was then bought over 600euros memory ttc the piece, in fact departing his most glittering party put forward a medium acute, nothing more to the serious, but for everything else, very poor production, let me explain ...
The material used kind of ABS plastic or the like, very dark blue becomes light blue stripe at the least ... when I "shake" the speaker, I hear the son of internal connection type against the chassis, after the uses the first two runs out of power (besides the SRM350 V1 were used on the same site in version 4 back in 350V1 srm and V2), so I send it for repair, while it is being repaired, the second goes down to the next exit (for those who have any doubt, always use the V1 at the same time, and on the same stage and same power supply, 1 amp QSC plx1602, a yamaha pc4800 amp, behringer ULTRACURVE 8024 and 2 Soundcraft LX7 console 1-32), after returning from two machine shop, a walk to this day, the second of a sudden more acute compression and a gift so large background noise, but not type buzz 50hz area, rather like blowing very hard, but the serious ...
So is the second in a corner to rot it will probably just keeping empty hp severe acute changed, added a filter, two Speakon and here is a rare model of passive srm350v2 ...
I remain at the disposal of those questions, and am curious to know the opinion of those who have the same version all black, is it the same? because I am still very happy with my V1 and my Mackie CFX20 ...
See less
20
»
Tech. sheet
- Manufacturer: Mackie
- Model: SRM350v2
- Series: SRM
- Category: Powered PA Speaker Cabinets
- Added in our database on: 09/20/2008
We have no technical specifications for this product
but your help will be much welcomed
»
Other categories in PA Speaker Cabinets
Other names: srm 350v 2, srm350 v2