All user reviews for the Behringer Ultragain Pro-8 Digital ADA8000

What are the proposed conversions? (Which formats and what the meaning of conversions?)
ADAT Line / Mic IN
ADAT OUT Line


What is the connection?
8 inputs and 8 line inputs micro
8 line outputs

OVERALL OPINION

How long have you use it?
2 years

What is the particular feature you like best and least?
most:
the general audio quality. is relatively flat it is not far from M audio
the number of input / output

Least
the 48 volt is for all the track or any
buttons preamp notched
48000 hz max

Have you tried many other models before buying it?
this is my first A / DD / A converter

How would you rate the quality / price?
Very very good! we not have any preamp death, but not his breath, and it is flat. what more? can be dynamic

With experience, you do again this choice? ...
yes, no problems

I used to increase the input and outputs of my sound card for live.
she is slave at the clock on my card.

here is frankly more than 2 years since I toured with a problem I loved the mic preamps are not cash too there is a LED clip anyway, and signal presence.
but I caught it in with my sound card output (ULN 2d)
I plug it dynamic microphones, static: bousouk DY, percussion, output effect processor,

I like my face came into use these handy.

you can assign what you want on the XLR balanced output (output returns and premix beats directly from my loopeur).

OVERALL OPINION

The pros: price, usability, connectivity,

the -: Phantom power is not individual quality preamps (should not dream that price 210 eur).

to live is the super model!

I expect to listen to the 820 ada preamps midas

This device is an ADAT converter. So AD and DA converters 8 channels with a digital signal in and out of the machine is ADAT: 8 channels passing through a single cable Toslink.
This type of device is intended on any device be connected ADAT, especially on maps that are in the ADAT converter gnral not much less pramplis microphones.

I used to have 8 analog inputs on my Fostex VF supplmentaires-16, making 16 entries ^ ^ ^ ^

Its main CHARACTERISTICS makes it interesting is the fact that a possde prampli micro (and a knob trim) on each input and at the time these lines j'cris o ( July 2004), few ADAT converters are quips: this alone is worthwhile to be stressed. All analog inputs and outputs are XLR symtrique and also between a jack possde assymtrique in addition to the XLR input on each channel. It can provide Gallant phantom power on all XLR power supply so that some microphones require electrical power mode in order to pick up sounds.

OVERALL OPINION

Well, the only thing I find unfortunate, in ergonomics, is the fact that the buttons SETTING THE sensitivity of micro pramplis are notched into a dozen positions :-(((( What damage: has made it more difficult to for ... = increasing rglages In addition, it is recommended not to turn it off before the device on which it is connected to ADAT or risk to block it . But a hand is a device trs simple to use, hardly need the manual to operate as long as the user hast a minimum of technological culture in the field of audionum America pro.

Deja cest the manufacturer but not RME Behringer

cest not bother to give you a technical description Because 1) the behringer cest 2) heads a lot information about the manufacturer's website

OVERALL OPINION

So I cest lai and not because I was looking for sth sharp for live and the price is UNBEATABLE in France of course, I do not talk about Thomann ...

clear at this price, must not dream, it pushes the blast quon trim strong enough, so bah, 250 euros ....

the headroom is minimal according to the source quon uses: either direct preamps clipped, or you push really hard on knob: So clipping or signal / noise close, well manage the upstream sources

but hey it helps out even though qd, and there are other products and a little + ones who are no better

for the studio, cest clear, snap the noise gates on the console, especially if you record real sound sources (without Amp Sim, or I do not know what else)

Units purchased 2 months ago.

8 in and 8 out, branch optical fiber with my 01V96.
Not have to put a word clock, the device synchronizes
completely and without loss in 24 bit 44.1.

I use the 8 outs to grate at the outlet To scne returns.
In the 8 I use my back Keyboards / Sound Modules, so in line level.

OVERALL OPINION

Device indestructible, walks all the time, not least dcrochage,
and it does exactly what I expected from him.

Cot output, completed a good job, say nothing.

Cot inputs, does not compare to the analog inputs of my
01V96, comparing, we realize a loss of dynamics and precision
sound, so I have decided not to connect any microphone on the 8000 ADA in between.
The cot is good only at the inputs, no buzz or breath is clean.

The report price is trs good quality, for 239 euros, hard to beat that price
l and I could not spend more budget on a machine that I use
main output return scne.

I would do the purchase without worry unless I had 10 times more money to spend.

Converting Analog to ADAT and ADAT to Analog (inputs are not directly routed to the outputs)

In: 8 XLR / jack
Out: 8 XLR

OVERALL OPINION

I use it for one month, what I like most is the cheapest is the sound quality. I tried a converter presonus before and there's no pictures of presonus converters are much better, it is four times more expensive too.

The value for money is excellent, however, there's way to work with anyway, the sound is "correct" I would say.

Given my budget I would do this choice. I use it to add 8 inputs to my EMU 1616M sound card so you can store a battery without a computer config "phew". For the rest I prefer to use my card converters EMU.