2 LD Systems Stinger Mix loudspeakers

Stinger Mix 6 G2 passive loudspeaker details:

• 6.5” woofer
• 1” compression driver
• Handling power: 70W / 280W peak
• Nominal impedance: 4 Ohms
• Frequency response: 80Hz – 20kHz
• Sensitivity: 90dB SPL (1W/1m)
• Max sound pressure level: 122dB SPL
• Dispersion angle: 80° H x 70° V
• 1/4” jack connector
• Protections: soft-start, overload, short-circuit, over-current, over-voltage, overheat
• Bass Reflex MDF enclosure, back lacquer
• 2 × 16mm mount pole sockets, rubber feet
• Dimensions: 323 × 214 × 222mm
• Weight: 4.3kg

Suggested price of this Stinger Mix 6 G2 is 99€.

Specifications of the Stinger Mix 6 A G2 powered version:

• 6.5” woofer
• 1” tweeter
• Class-D bi-amp: 2×70W / 2×280W peal
• Frequency response: 80Hz – 20kHz
• Max sound pressure level: 122dB SPL
• Dispersion angle: 80° H x 70° V
• Protections: limiter, short-circuit, over-current, thermal overload, overheat
• Built-in 4-channel mixer with 3 XLR/1/4”jack mic inputs, 2-band EQs, digital FX sends, level control and Hi-Z switch on input 1 ; 1/8” stereo mini-jack and RCA Cinch L/R line inputs ; Line-level Monitor output with dedicated level, Record output (2 RCA) and 1/4” Main output (amp, 4 Ohm minimal impedance) ; DSP processor with 16 effect programs ; Master section with 3-band EQ, level, phantom power switch, 4-segment LED VU-meter
• Bass Reflex MDF enclosure, black lacquer
• Dimensions: 323 × 214 × 222mm
• Weight: 6.8
• 2 × 16mm pole mount sockets, rubber feet
• Can be used as a floor monitor

Suggested retail price of this powered version is 249€.