is no effect loop which is driven either by a latch footswitch or by a control type engl z11 or whatever. 9 VDC power supply, input 1 100m, 1send, a return, an output
A switch to test the effect DATR placed the send and return is active
6.35 a mono jack to control the looper
everything is analogue
just the flat ground between the jacks are common so be careful to ground loop hum when occurs
we use isolation transformers and the bill climbs quickly
you lift the weight of the cables used to send and return to see but one side effect if the insert is placed in powered from the mains with earthed
attention also to the masses due to isolation effects mauvaix (scrap metal scrap metal cons = loop)
it's stupid and nasty it works it does not work no need to use it for polytechnic!
a bit noisy at closing of the contacts (relay type finder)
and the risk of ground loop may become Nutcracker!
I still used but less and less, especially in the place I return to send a boss ns-2 which filters the switching noise of the relay
Today there are other solution Wobo style, Gigrig, Voodoolab, RMJ, but this is not the same budget either!
it works fine if you use quality cables, good power supplies
at the time or only bradshaw rsb 12/18 and patchmates ruled this was the best solution for budget
Today I've always just in case !!!!!
Did you find this review helpful?yesno
Leulapin's review (This content has been automatically translated from French)
An effects loop in a small size box food in a 9-volt controllable by footswitch fermouvert classic.
IN OUT, SEND RETURN, REMOTE, food + 9volts out (to chain with other effects pedals 9v type bypasses the loop master)
on / off button
Diodes faade clearly indicate the state of the loop.
The configuration is very simple you just get it right in many cblages in the IDAL everything is installed in a rack and not moving.
The manual is clear.
L it is important to return to the connection with Cables average or crap, we add the loss of connectivity, it is important to use a high-end cblage.
The Nobel loop master becomes transparent 95% say that cbl with Cables and good short jacks at the end. I use George L and I get quite a level of transparency thundering. The sound is as good with all that cbl by George L instrument cable when using a whirlwind (mid-range brand) directly into the amp.
So the true switching system is not an advertisement prior invention.
I use it for three weeks, the sound is gnial the NCESS to make the switch jack (remote) is a bit boring, a term I can be the complterait Systm twelve o'clock by a switch history of having only one cable pull ...
I did try that bypass loop multi effects before, clearly has nothing to see ...
Quality price ratio is excellent because not have to buy 4 or 8 switchable loops as in the GCX audio switcher or Rocktron patchmate cot and therefore is proportional to the number of loops that a.