All user reviews for the Fender Princeton 112 Plus

I needed a backup amp and thought about a basic solid-state amp that wasn't heavy and fitted in my car's trunk.
I went for this 1996 solid-state Fender Princeton 112+, made in USA, rated at 65 watts, with a 12" speaker, and weighing 31 lbs, which has perfect looks for its age.
In terms of controls, it features two channels with separate EQ, reverb (not amazing, but correct), FX loop, and headphones output on the front panel. Nothing other than the usual.

UTILIZATION

The clean channel comes originally with a reverse log pot for the volume, so the volume increases quite a bit from 0 to 1.
Hyper-clean, well-defined sound, pleasant without the need to spend much time with it.
I expected worse from the drive channel because I had already tried other solid-state Fenders (FM65, RocPro 100, for example), and it was obvious to me that it isn't the brand's main strength. Well, it's progressive and useful thanks to the contour control.

SOUNDS

I have a Strat and play '50s Rock 'n' Roll.
My amp is a 12-watt, class A Fender Champ 12 with a 6L6GC, mounted with the Torrès kit and I'm really satisfied with it.
The Princeton 112+ comes very close in terms of clean sound, with colder dynamics, obviously, but perfectly usable for my music style: The sound is typical Fender, meaning crystalline and well-defined.
I use the drive channel as a clean boost with the gain set to minimum, and I have added a Joyo F14 American for the crunch.
The amp works perfectly with pedals.

OVERALL OPINION

I bought it two months ago and it was an excellent surprise: A typical Fender with two channels, light and powerful.
I changed the volume pot of the clean channel with a log pot and the amp has become even better.
It's a real delight to plug in my Strat live with the amp's reverb. It's evident that it's far from the dynamics a tube amps has, but the sound isn't sterile at all, like with some other amps in the same category. I would definitely buy it again given its value for money.

60 watts solid-state amp (although I'd say it delivers more), one 1/4" jack input.
4 other connections: 1 for a footswitch, 1 preamp out, 1 power amp in and headphones.
Two channels: clean and overdrive, each with treble/bass and volume controls, plus contour and gain for the second channel. A reverb button that works for both channels. It's a pity that it doesn't have a control for the mids, but we'll forgive it for that.
Knobs a bit cheap...

UTILIZATION

Very easy to understand, no need for a manual, I really like the contour control that provides us with a good palette of different sounds!


SOUNDS

I recognize the clean Fender sound...Just for that I love it. And besides, you shouldn't use this amp for what it isn't meant to be used for: this distortion was not made for metal, but it really knows its trade when it comes to blues/rock/grunge! I use it with both single-coils and humbuckers and it responds fine, no problems in that sense.

OVERALL OPINION

I spotted it at a secondhand shop some time ago and I just bought if for $260. I've seen it on mail-order shops for $350, so it was a good deal!
Its main advantage is the Fender clean sound. I think I can recommend this product without hesitation.

- Solid-state amp
- 100W: very comfortable at home, enough for rehearsals.
- 1 12'' speaker - think about it
- 1 input, an effects loop, a headphones output
- Clean channel controls: 1 Vol, 1 Treble, 1 Bass
- Lead channel controls: 1 Vol, 1 Contour (acid color=>fat), 1 Treble, 1 Bass,
- Reverb


UTILIZATION

- Very easy to use, you know right away what to do without the need for a user guide for basic traditional usage.
- In terms of sound, I use 98% of the times the clean channel: I was thrilled to quickly find a basic sound that suits me perfectly. I only use the (effective) controls to adjust this sound depending on the situation (place of the performance, new members in the band...).
- In terms of gain: I use it only 2% of my time, I admit that I haven't been able to find a sound that pleases me. I find the settings too "clichéd." It really lacks a mids control. The contour control allows you to very easily work with colors ranging from very fat heavy metal sounds to acid/metallic distortions from the '70s with a gain setting - transistor - that goes from crunch to "too" distorted.
- The reverb: effective and reasonable up to the 3 mark (from 10). Very nice color in my opinion and OK at 2!

Apart from that, the amp has a lot of presence and it is fine for a solid-sate amp, the difference with a tube amp are the dynamics.
I use it as follows: a guitar that goes through a multi-effects and then to the clean channel
My trick: the settings are not progressive. I use a volume pedal that makes the use of the amp much simpler. I have never noticed huge level differences (dynamics, harmonics or reproduction) with the control at 2 with and without the pedal 1/2 or 1/4 of the way up.
The mark I give it refers to the quality of the clean channel!!!!

SOUNDS

- I love the clean channel, which is THE foundations of my sound and that I haven't found in any other solid-state amp. Long live the 12'' speaker: warmth and ease of use.
- See above for the sound according to the settings.

OVERALL OPINION

- Bought in December 1996, I've used it on average 10 hours per week ever since.
- I haven't found a similar sound from a solid-state amp with these dimensions, power and price!!
- I love the clean channel: I can't say it enough!!
- It has never broken down, no need to even change a single jack, nothing!!! It's the best.
- Quite easy to transport (less than 44 lbs/20 kg I think): on the subway... easy to fit in a car.
- It's great at home, but it might be somewhat limited for concerts!!

Value for money: in 1996 it was an amazing value for money. For that price, I think I would still go for it today.
Would I change it? I've thought about it, but changing to a tube amp to get more character and options (2 speakers, a reverb, an effects loop) is a real investment: I would pay dearly the difference given the advantages it would mean to me.
The overall mark is based on the use I give it, considering it's a solid-state amp with less than 100 W!

The Fender Princeton 112 Plus is a guitar combo amplifier that is split up into a normal and a drive channel.  It has a ¼ inch input as well as ¼ inch connections for a foot switch, headphones, or a separate preamp or power amp.  It also has a single 12 inch speaker as the name suggests.

UTILIZATION

If you have any experience with guitar amps, you won’t have any trouble with this amp as it has a very basic make up that is seen across the board on Fender amplifiers.  The normal channel has parameters for volume, treble, and bass, while the drive channels has parameters for gain, contour, treble, and bass.  It also has a master volume and a reverb knob that apply to the amp no matter which channel you have switched on.  I don’t have the manual for the Fender Princeton 112 Plus, but if you don’t have it, it isn’t a big deal as you can figure out the amp on its own.

SOUNDS

The sounds possible with the Fender Princeton 112 Plus amp are pretty varied and most of have a precise and clean sound to them.  I like using both the normal and drive channels and I find best that this amp sounds best when using a Fender guitar like a Stratocaster or a Telecaster with it.  For some reason it seems that Fender on Fender just always sounds best.  I also like to use the reverb a lot and it is definitely a nice feature to have.



OVERALL OPINION

I’ve been using the Fender Princeton 112 Plus for about two years for both live shows and recording and I’ve found that it works pretty well for both of these applications.  It isn’t too big so it is easy to bring around and while it can crank up pretty loud, I usually mic it up anyway.  The price is pretty reasonable and probably won’t deter anyone from picking one up if they like it.  While not ideal for shows, it will work well on the stage as well as in the studio.