Log in
Log in

or
Create an account

or
Add this product to
  • My former gear
  • My current gear
  • My wishlist
Peavey 6505+ Head
Images
1/352

All user reviews of 4/5 for the Peavey 6505+ Head

Tube Guitar Amp Head from Peavey belonging to the 6505 series

Price engine
Classified Ads
Forums
Not satisfied with those reviews?
Filter
4.8/5
(10 reviews)
60 %
(6 reviews)
30 %
(3 reviews)
Write a user review
Users reviews
  • EroachguitarEroachguitar

    21 Years in production and still melting faces

    Peavey 6505+ HeadPublished on 09/28/12 at 17:39
    Peavey has been producing quality, American Made music equipment at an honest price point for 47 years. All except for a select few products are still manufactured in Meridian, Mississippi under the ultimate oversight of Hartley Peavey, who founded Peavey Electronics in 1965.

    The Peavey 6505+, formerly known as the 5150II, is an all-tube, 2 channel high-gain guitar amplifier boasting 120 rated watts of 6L6GC power, and a staggering 6 stage preamp. The channels, labeled Rhythm and Lead, are both capable of obscene amounts of gain.





    UTILIZATION

    The 6505+ is easy to dial in, and good tone can be found on both channels. The FX Loop is tube buffered, and as far as I could tel…
    Read more
    Peavey has been producing quality, American Made music equipment at an honest price point for 47 years. All except for a select few products are still manufactured in Meridian, Mississippi under the ultimate oversight of Hartley Peavey, who founded Peavey Electronics in 1965.

    The Peavey 6505+, formerly known as the 5150II, is an all-tube, 2 channel high-gain guitar amplifier boasting 120 rated watts of 6L6GC power, and a staggering 6 stage preamp. The channels, labeled Rhythm and Lead, are both capable of obscene amounts of gain.





    UTILIZATION

    The 6505+ is easy to dial in, and good tone can be found on both channels. The FX Loop is tube buffered, and as far as I could tell, did its job with not a lot of loss to signal integrity. There is also a Preamp line out, which functions in the same way and quality that most of them do. You get all of the preamp tone up until the phase inverter. Some like to use this signal when mixing it with the signal from the speaker cabinet.

    The head itself is sufficiently well-built to Peavey's high standards of durability, though not as bulletproof as their amps of yore. I'm still wondering just what exactly they used for tolex back in those days! Tough stuff, for sure.
    The 6505+ sports a rather garden-variety grade of softer tolex. Chickenhead knobs make settings easy to pinpoint and see on a dark stage. An ohms selector switch on the back makes matching the head to a 4, 8, or 16 ohm cabinet possible, and a footswitch connects via 5 pin DIN connector in the back as well.

    An ALMOST good feature on the back is the addition of bias test points on the back, which actually only read grid voltage, and says nothing about actual plate current, which is the important measurement in power tube bias. Still, with a standard set of 6L6GC's, one can set the bias by ear and be safe in the -50 to -45v range.

    SOUNDS

    Unlike the 5150/6505, the +/II doesn't share one set of EQ controls, and global Resonance and Presence add clean highs and punchy lows to the mix.

    The Rhythm channel is switchable between Clean and Crunch modes. The Clean mode is famous, or rather infamous, for being not a very good clean tone. And indeed it is rather flat, lifeless, and too hairy when the Rhythm Gain is cranked. This is due to the fact that the 6505+ doesn't switch out extra gain stages to obtain the clean sound, and instead chooses to switch in a circuit that greatly attenuates the signal coming off the first gain stage while leaving the preamp topology largely intact.

    That being said, the clean channel can be usable to some, depending on how it is set up. Delay, chorus, and external reverb effects (the 6505 series has no reverb) can help the player get a better usable clean sound.

    The Crunch mode is excellent, and gives a nice, clear grinding sound that can also be rolled back to produce some convincing classic tones.

    Many metal players prefer the lower gain and fast response of the Rhythm Channel's Crunch mode over the Lead channel, and prefer to run this channel with the gain maxed and boosted with an overdrive pedal for a smidge extra gain and a tighter lowend.

    Still, the Lead channel is usable and packs plenty of punchy, raunchy grind with a little extra juice for solo work.


    OVERALL OPINION

    The 6505 series was heavily inspired by a classic Soldano Circuit, but takes things a step farther with more gain stages. As a result, clarity can sometimes be lost in the wash of preamp distortion, and a lot of people complain of the "fizzy" nature of the 6505's, as well as the background hiss that comes with the territory of high gain. And that's a fact of life. With gain comes noise, and this is why some amplifiers from different companies that possess similar levels of gain are also equipped with built-in noise gates to combat the hiss and noise.


    The 6505+ is an adjustable fixed bias amp, and comes from the factory with a safe, colder bias range (no doubt to maximize tube life and prevent tube meltdown from accidental over-biasing) and many have found that the cold, brittle, fizzy sound of their stock 6505+ was greatly improved by changing out the bias voltage dropping resistor with one of a lower value to allow for a hotter power tube bias.



    All things considered, the 6505+ is an amazing value, squeezing face-melting gain, lots of power, and revered tone into a quality, American-made package.

    See less
  • King LoudnessKing Loudness

    Peavey 6505+... replacement eardrums not included.

    Peavey 6505+ HeadPublished on 08/09/11 at 19:26
    The Peavey 6505+ is the updated version of the famous Peavey 5150 II as popularized by it's signature endorsee Edward Van Halen. The original 5150 was noted as a great rock amp, but eventually was recognized as a killer amp for metal music. Eventually Peavey took things one step further and released the updated 5150 II. When Ed left Peavey in 2004 he took the 5150 designation with him... and so in 2005 Peavey renamed the 5150 II the 6505+ (the 5150 was called the 6505). The 6505+ is a 120 watt firebreather of an amp, featuring two channels.

    Each channel features a preamp and post gain controls (basically gain and volume controls, but relabeled) as well as an EQ set of bass, middle and tr…
    Read more
    The Peavey 6505+ is the updated version of the famous Peavey 5150 II as popularized by it's signature endorsee Edward Van Halen. The original 5150 was noted as a great rock amp, but eventually was recognized as a killer amp for metal music. Eventually Peavey took things one step further and released the updated 5150 II. When Ed left Peavey in 2004 he took the 5150 designation with him... and so in 2005 Peavey renamed the 5150 II the 6505+ (the 5150 was called the 6505). The 6505+ is a 120 watt firebreather of an amp, featuring two channels.

    Each channel features a preamp and post gain controls (basically gain and volume controls, but relabeled) as well as an EQ set of bass, middle and treble controls. Also available to each channel is a set of resonance and presence controls, which control low and high end response respectively. On the back it has two speaker jacks, a switch to select between 4ohm, 8ohm and 16ohm impedence, a ground switch and send/return jacks for the effects loop.

    Tube wise it features six 12AX7 preamp tubes and four 6L6GC power amp tubes to unleash the fire within.

    UTILIZATION

    The Peavey 6505+ is an extremely easy amp to set up. Peavey amps in general don't require much tweaking in general to sound great. The two channels are set up identically, so there's no new interfaces to learn and there's not really a learning curve with the EQ or gain structures like say a Mesa Dual Rectifier. Something to note about these amps... they are LOUD. When I had mine, I could barely dial the control to one without it being too loud for the room. In a band setting I found that two or three on the volume would overpower the drums... as a result I didn't keep it very long. Essentially, if you want one of these amps, be prepared to deal with the volume.

    SOUNDS

    I primarily used this amp with a Les Paul, a Charvel San Dimas and (for a short time) a Schecter 7 string. The two channels are meant to be a clean and lead, however the clean channel really doesn't do great cleans. The clean channel is more useful as a crunch channel, especially when boosted with a good overdrive. I tried to get decent cleans out of this amp, but what I was greeted with was fairly flat and unremarkable. I had more fun turning the gain up full bore and just using channel one as a crunch channel. Channel two is a great high gain lead sound for any modern player. Despite the fact that I never tried it with any delay/reverb effects, I noted that on its own, the amp had more than enough sustain (via saturation) to play great lead passages as well as quite a few different types of hard rock and metal riffs. It doesn't really do the eighties thing all that well... which is somewhat surprising considering it's basically the EVH signature amplifier (though I've noticed that EVH has steadily gone for a more modern tone over time).

    OVERALL OPINION

    All in all, the Peavey 6505+ is a great sounding amplifier head for anyone who wants a loud, gain heavy, loud, really saturated, loud tone. They are about $1,300 new and can be had for about $700 used, which is a killer deal for a USA made head. Peavey gear is quite reliable and I'd have no qualms using the 6505+ for more rigorous applications. I partly wish that the "clean channel" was cleaner and sounded a little clearer, but used as a crunch channel it's fine. The lead channel is high gain, but it's still controllable and the excess saturation can be used to your advantage if you allow it to. Definitely worth looking into if you want a great metal amp for not a whole lot of money.
    See less
  • darkwolf291darkwolf291

    Metal Machine

    Peavey 6505+ HeadPublished on 04/08/11 at 19:29
    This is a 100w, two channel, all tube monster. It uses 6 12AX7 preamp tubes to give you a ludicrous amount of gain, and 4 6L6 power tubes. It has footswitchable lead and rhythm channels and FX Loop. It has a 3-band EQ, Pre and Post gain, Presence, and Resonance controls for both channels. The Rhythm Channel has a Bright and Crunch switch. It has 3 speaker outs for 4, 8, and 16 ohm cabs.

    UTILIZATION

    This amp is easy to get an awesome sound out of if you know how to do it. It is also easy to get a muddy, horrible sound out of. This thing has more gain than you will ever use, so it's better to keep the Pregain as low as you can for what you want to play. Push it too high and it WILL …
    Read more
    This is a 100w, two channel, all tube monster. It uses 6 12AX7 preamp tubes to give you a ludicrous amount of gain, and 4 6L6 power tubes. It has footswitchable lead and rhythm channels and FX Loop. It has a 3-band EQ, Pre and Post gain, Presence, and Resonance controls for both channels. The Rhythm Channel has a Bright and Crunch switch. It has 3 speaker outs for 4, 8, and 16 ohm cabs.

    UTILIZATION

    This amp is easy to get an awesome sound out of if you know how to do it. It is also easy to get a muddy, horrible sound out of. This thing has more gain than you will ever use, so it's better to keep the Pregain as low as you can for what you want to play. Push it too high and it WILL be muddy. It's very easy to make this amp sound great.

    SOUNDS

    This is a metal machine. End of story. Nice, Thick, aggressive, powerful gain. Can be as tight or as loose as you want it too be. Throw an OD in front to tighten things up and you've got an awesome amp, suited perfectly for Metal. It has more of an American voicing, and has a load of mids. Very easy to cut through the mix using this amp.
    The cleans aren't as bad as some people will lead you to believe, but they're not stellar. They're some what thin and a little lifeless, but a Chorus and Reverb helps greatly.

    OVERALL OPINION

    All in all, this is one bad-ass amp. Perfect for any style of metal you can imagine, and also can do Rock and hardcore without batting an eye. It's the go-to amp for high-gain tones, and for good reason. It's a solid amp with a great tone for an awesome price. There are amps that can out do it, but those cost a lot more. This is the king of the $1000-1500 metal amps I've played, and sounds even better with a boost.
    See less