Log in
Log in

or
Create an account

or
Add this product to
  • My former gear
  • My current gear
  • My wishlist
Allen & Heath Xone:4D
Images
1/385

All user reviews for the Allen & Heath Xone:4D

4+ Channel Mixer from Allen & Heath belonging to the Xone series

Filter
4.3/5
(14 reviews)
36 %
(5 reviews)
7 %
(1 review)
7 %
(1 review)
Write a user review
Users reviews
  • rascarrascar

    Allen & Heath Xone:4DPublished on 02/04/10 at 06:21
    (This content has been automatically translated from French)
    Analog mixer 4-way, 3-way teams of phono XLR outputs.
    3-band EQs full cut.
    FX 2 in / out assignable.
    USB 2.0 Sound Card 20-channel (8 + 2in / 2out 8 + @ 44.1kHz-96kHz)
    227 contrles MIDI.
    2 VCA filters A & H assignable.
    Between XLR
    Headphone out in 3.5 and 6.35

    No equalizer on the master nor the booth or headphones. So prvoir one or more paramtriques / graphics.



    USE


    The beast is very team, so complex, especially at management level sound card in-out / analog in-out, but the manual is comprehensive and very clear. (I do not know if it is available in franais).
    The layout of the buttons is Idale. The quality faders and knobs is the best. It is possible to change the…
    Read more
    Analog mixer 4-way, 3-way teams of phono XLR outputs.
    3-band EQs full cut.
    FX 2 in / out assignable.
    USB 2.0 Sound Card 20-channel (8 + 2in / 2out 8 + @ 44.1kHz-96kHz)
    227 contrles MIDI.
    2 VCA filters A & H assignable.
    Between XLR
    Headphone out in 3.5 and 6.35

    No equalizer on the master nor the booth or headphones. So prvoir one or more paramtriques / graphics.



    USE


    The beast is very team, so complex, especially at management level sound card in-out / analog in-out, but the manual is comprehensive and very clear. (I do not know if it is available in franais).
    The layout of the buttons is Idale. The quality faders and knobs is the best. It is possible to change the crossfader by P & G. The assignment of the cross for each channel is via a small switch 3 positions (X / O / Y) not practical at all, especially in the pnombre.
    The MIDI contrles as the knobs / faders mixer operation are both firm and flexible, quality of so.
    The meters are very accurate and a good size.


    SONORITS

    The audio quality is top. No buzz, hum, blast. The sound card 24B / 96Khz is crystalline. The analogue inputs ditto.
    Just a little jitter filters A & H without input and very high volume headphone / master. (A table is made out of her ... but must find a default)
    The EQs are of very good quality, and cut the infinite.


    NOTICE GLOBAL

    After 5 months of testing, I'm very happy, and saw the look of my friends over, even proud
    It must be said that in addition to being a very good table, it's a beautiful table (bright black light).

    The lack of EQ output is harmful if the sound does not possde EQ, but it's an ultra pro table, so the rack of effects and EQs must be Introduced as it should .dropoff window It also lacks a little EQ on the headphone output. I finally there's also the solutions.

    Concerning the use, I Traktorise with, and I am persuaded that 4D is the best tool for a.
    After you mapp all dsires functions, workflow is impeccable.
    Considering the price / robustness / functionalities, I do not believe in me Sparer sitt.
    See less
  • Anonymous

    Allen & Heath Xone:4DPublished on 02/04/10 at 07:14
    (This content has been automatically translated from French)
    Analog mixer 4-way, 3-way teams of phono XLR outputs.
    3-band EQs full cut.
    FX 2 in / out assignable.
    USB 2.0 Sound Card 20-channel (8 + 2in / 2out 8 + @ 44.1kHz-96kHz)
    227 contrles MIDI.
    2 VCA filters A & H assignable.
    Between XLR
    Headphone out in 3.5 and 6.35

    No equalizer on the master nor the booth or headphones. So prvoir one or more paramtriques / graphics.

    USE

    The beast is very team, so complex, especially at management level sound card in-out / analog in-out, but the manual is comprehensive and very clear. (I do not know if it is available in franais).
    The layout of the buttons is Idale. The quality faders and knobs is the best. It is possible to change the cr…
    Read more
    Analog mixer 4-way, 3-way teams of phono XLR outputs.
    3-band EQs full cut.
    FX 2 in / out assignable.
    USB 2.0 Sound Card 20-channel (8 + 2in / 2out 8 + @ 44.1kHz-96kHz)
    227 contrles MIDI.
    2 VCA filters A & H assignable.
    Between XLR
    Headphone out in 3.5 and 6.35

    No equalizer on the master nor the booth or headphones. So prvoir one or more paramtriques / graphics.

    USE

    The beast is very team, so complex, especially at management level sound card in-out / analog in-out, but the manual is comprehensive and very clear. (I do not know if it is available in franais).
    The layout of the buttons is Idale. The quality faders and knobs is the best. It is possible to change the crossfader by P & G. The assignment of the cross for each channel is via a small switch 3 positions (X / O / Y) not practical at all, especially in the pnombre.
    The MIDI contrles as the knobs / faders mixer operation are both firm and flexible, quality of so.
    The meters are very accurate and a good size.

    SONORITS

    The audio quality is top. No buzz, hum, blast. The sound card 24B / 96Khz is crystalline. The analogue inputs ditto.
    Just a little jitter filters A & H without input and very high volume headphone / master. (A table is made out of her ... but must find a default)
    The EQs are of very good quality, and cut the infinite.


    NOTICE GLOBAL

    After 5 months of testing, I'm very happy, and saw the look of my friends over, even proud;)
    It must be said that in addition to being a very good table, it's a beautiful table (bright black light).

    The lack of EQ output is harmful if the sound does not possde EQ, but it's an ultra pro table, so the rack of effects and EQs must be Introduced as it should .dropoff window It also lacks a little EQ on the headphone output. I finally there's also the solutions.

    Concerning the use, I Traktorise with, and I am persuaded that 4D is the best tool for a.
    After you mapp all dsires functions, workflow is impeccable.
    Considering the price / robustness / functionalities, I do not believe in me Sparer sitt.
    See less
  • Anonymous

    Allen & Heath Xone:4DPublished on 02/04/10 at 07:25
    (This content has been automatically translated from French)
    And if I do not cut and paste and I put a smiley :)

    USE

    Analog mixer 4-way, 3-way teams of phono XLR outputs.
    3-band EQs full cut.
    FX 2 in / out assignable.
    USB 2.0 Sound Card 20-channel (8 + 2in / 2out 8 + @ 44.1kHz-96kHz)
    227 contrles MIDI.
    2 VCA filters A & H assignable.
    Between XLR
    Headphone out in 3.5 and 6.35

    No equalizer on the master nor the booth or headphones. So prvoir one or more paramtriques / graphics.



    SONORITS

    PWET

    NOTICE GLOBAL

    it'll be good
    Read more
    And if I do not cut and paste and I put a smiley :)

    USE

    Analog mixer 4-way, 3-way teams of phono XLR outputs.
    3-band EQs full cut.
    FX 2 in / out assignable.
    USB 2.0 Sound Card 20-channel (8 + 2in / 2out 8 + @ 44.1kHz-96kHz)
    227 contrles MIDI.
    2 VCA filters A & H assignable.
    Between XLR
    Headphone out in 3.5 and 6.35

    No equalizer on the master nor the booth or headphones. So prvoir one or more paramtriques / graphics.



    SONORITS

    PWET

    NOTICE GLOBAL

    it'll be good
    See less
  • Anonymous

    Allen & Heath Xone:4DPublished on 02/04/10 at 07:26
    (This content has been automatically translated from French)
    My teachers said of franais same for DJ Turntables + ... If only the mix on vinyl could avoid to type the same mediocrity noise level ...

    USE

    My teachers said of franais same for DJ Turntables + ... If only the mix on vinyl could avoid to type the same mediocrity noise level ...

    SONORITS

    Concerning the use, I Traktorise with, and I am persuaded that 4D is the best tool for a.
    After you mapp all dsires functions, workflow is impeccable.
    Considering the price / robustness / functionalities, I do not believe in me Sparer sitt.
  • Anonymous

    Allen & Heath Xone:4DPublished on 02/04/10 at 07:28
    (This content has been automatically translated from French)
    The audio quality is top. No buzz, hum, blast. The sound card 24B / 96Khz is crystalline. The analogue inputs ditto.
    Just a little jitter filters A & H without input and very high volume headphone / master. (A table is made out of her ... but must find a default)
    The EQs are of very good quality, and cut the infinite.

    After 5 months of testing, I'm very happy, and saw the look of my friends over, even proud;)
    It must be said that in addition to being a very good table, it's a beautiful table (bright black light).

    The lack of EQ output is harmful if the sound does not possde EQ, but it's an ultra pro table, so the rack of effects and EQs must be Introduced as it should .dropoff w…
    Read more
    The audio quality is top. No buzz, hum, blast. The sound card 24B / 96Khz is crystalline. The analogue inputs ditto.
    Just a little jitter filters A & H without input and very high volume headphone / master. (A table is made out of her ... but must find a default)
    The EQs are of very good quality, and cut the infinite.

    After 5 months of testing, I'm very happy, and saw the look of my friends over, even proud;)
    It must be said that in addition to being a very good table, it's a beautiful table (bright black light).

    The lack of EQ output is harmful if the sound does not possde EQ, but it's an ultra pro table, so the rack of effects and EQs must be Introduced as it should .dropoff window It also lacks a little EQ on the headphone output. I finally there's also the solutions.

    Concerning the use, I Traktorise with, and I am persuaded that 4D is the best tool for a.
    After you mapp all dsires functions, workflow is impeccable.
    Considering the price / robustness / functionalities, I do not believe in me Sparer sitt.
    See less
  • Anonymous

    Allen & Heath Xone:4DPublished on 02/04/10 at 07:28
    (This content has been automatically translated from French)
    The audio quality is top. No buzz, hum, blast. The sound card 24B / 96Khz is crystalline. The analogue inputs ditto.
    Just a little jitter filters A & H without input and very high volume headphone / master. (A table is made out of her ... but must find a default)
    The EQs are of very good quality, and cut the infinite.

    After 5 months of testing, I'm very happy, and saw the look of my friends over, even proud;)
    It must be said that in addition to being a very good table, it's a beautiful table (bright black light).

    The lack of EQ output is harmful if the sound does not possde EQ, but it's an ultra pro table, so the rack of effects and EQs must be Introduced as it should .dropoff w…
    Read more
    The audio quality is top. No buzz, hum, blast. The sound card 24B / 96Khz is crystalline. The analogue inputs ditto.
    Just a little jitter filters A & H without input and very high volume headphone / master. (A table is made out of her ... but must find a default)
    The EQs are of very good quality, and cut the infinite.

    After 5 months of testing, I'm very happy, and saw the look of my friends over, even proud;)
    It must be said that in addition to being a very good table, it's a beautiful table (bright black light).

    The lack of EQ output is harmful if the sound does not possde EQ, but it's an ultra pro table, so the rack of effects and EQs must be Introduced as it should .dropoff window It also lacks a little EQ on the headphone output. I finally there's also the solutions.

    Concerning the use, I Traktorise with, and I am persuaded that 4D is the best tool for a.
    After you mapp all dsires functions, workflow is impeccable.
    Considering the price / robustness / functionalities, I do not believe in me Sparer sitt.

    :)dropoff Window
    See less
  • Anonymous

    Allen & Heath Xone:4DPublished on 02/04/10 at 07:29
    (This content has been automatically translated from French)
    The audio quality is top. No buzz, hum, blast. The sound card 24B / 96Khz is crystalline. The analogue inputs ditto.
    Just a little jitter filters A & H without input and very high volume headphone / master. (A table is made out of her ... but must find a default)
    The EQs are of very good quality, and cut the infinite.
    After 5 months of testing, I'm very happy, and saw the look of my friends over, even proud;)
    It must be said that in addition to being a very good table, it's a beautiful table (bright black light).
    The lack of EQ output is harmful if the sound does not possde EQ, but it's an ultra pro table, so the rack of effects and EQs must be Introduced as it should .dropoff win…
    Read more
    The audio quality is top. No buzz, hum, blast. The sound card 24B / 96Khz is crystalline. The analogue inputs ditto.
    Just a little jitter filters A & H without input and very high volume headphone / master. (A table is made out of her ... but must find a default)
    The EQs are of very good quality, and cut the infinite.
    After 5 months of testing, I'm very happy, and saw the look of my friends over, even proud;)
    It must be said that in addition to being a very good table, it's a beautiful table (bright black light).
    The lack of EQ output is harmful if the sound does not possde EQ, but it's an ultra pro table, so the rack of effects and EQs must be Introduced as it should .dropoff window It also lacks a little EQ on the headphone output. I finally there's also the solutions.
    Concerning the use, I Traktorise with, and I am persuaded that 4D is the best tool for a.
    After you mapp all dsires functions, workflow is impeccable.
    Considering the price / robustness / functionalities, I do not believe in me Sparer sitt.


    USE

    The audio quality is top. No buzz, hum, blast. The sound card 24B / 96Khz is crystalline. The analogue inputs ditto.
    Just a little jitter filters A & H without input and very high volume headphone / master. (A table is made out of her ... but must find a default)
    The EQs are of very good quality, and cut the infinite.
    After 5 months of testing, I'm very happy, and saw the look of my friends over, even proud;)
    It must be said that in addition to being a very good table, it's a beautiful table (bright black light).
    The lack of EQ output is harmful if the sound does not possde EQ, but it's an ultra pro table, so the rack of effects and EQs must be Introduced as it should .dropoff window It also lacks a little EQ on the headphone output. I finally there's also the solutions.
    Concerning the use, I Traktorise with, and I am persuaded that 4D is the best tool for a.
    After you mapp all dsires functions, workflow is impeccable.
    Considering the price / robustness / functionalities, I do not believe in me Sparer sitt.


    SONORITS

    The audio quality is top. No buzz, hum, blast. The sound card 24B / 96Khz is crystalline. The analogue inputs ditto.
    Just a little jitter filters A & H without input and very high volume headphone / master. (A table is made out of her ... but must find a default)
    The EQs are of very good quality, and cut the infinite.
    After 5 months of testing, I'm very happy, and saw the look of my friends over, even proud;)
    It must be said that in addition to being a very good table, it's a beautiful table (bright black light).
    The lack of EQ output is harmful if the sound does not possde EQ, but it's an ultra pro table, so the rack of effects and EQs must be Introduced as it should .dropoff window It also lacks a little EQ on the headphone output. I finally there's also the solutions.
    Concerning the use, I Traktorise with, and I am persuaded that 4D is the best tool for a.
    After you mapp all dsires functions, workflow is impeccable.
    Considering the price / robustness / functionalities, I do not believe in me Sparer sitt.


    NOTICE GLOBAL

    The audio quality is top. No buzz, hum, blast. The sound card 24B / 96Khz is crystalline. The analogue inputs ditto.
    Just a little jitter filters A & H without input and very high volume headphone / master. (A table is made out of her ... but must find a default)
    The EQs are of very good quality, and cut the infinite.
    After 5 months of testing, I'm very happy, and saw the look of my friends over, even proud;)
    It must be said that in addition to being a very good table, it's a beautiful table (bright black light).
    The lack of EQ output is harmful if the sound does not possde EQ, but it's an ultra pro table, so the rack of effects and EQs must be Introduced as it should .dropoff window It also lacks a little EQ on the headphone output. I finally there's also the solutions.
    Concerning the use, I Traktorise with, and I am persuaded that 4D is the best tool for a.
    After you mapp all dsires functions, workflow is impeccable.
    Considering the price / robustness / functionalities, I do not believe in me Sparer sitt.
    See less
  • SirJeffSirJeff

    extra

    Allen & Heath Xone:4DPublished on 08/16/14 at 03:36
    (This content has been automatically translated from French)
    it has everything you need for fun in mix / live and prep model. connectivity pro compatible sound card traktor scratch co

    UTILIZATION

    great thought table, set aside some time to do a personal mapping for traktor. The manual is clear and well explained.
    Part tablede mix: everything comes to hand and the knobs are good, its simplicity allows to quickly switch from traktor Live and synths.
    midi controllers: to map as needed, knobs and fader reagents and precise, jogs lack precision

    SOUNDS

    the sound & h, eq super effective monitoring breath a little but nothing bad in sound (for which it is intended)
    The sound is warm and round it knocks, filters and eq are terrible…
    Read more
    it has everything you need for fun in mix / live and prep model. connectivity pro compatible sound card traktor scratch co

    UTILIZATION

    great thought table, set aside some time to do a personal mapping for traktor. The manual is clear and well explained.
    Part tablede mix: everything comes to hand and the knobs are good, its simplicity allows to quickly switch from traktor Live and synths.
    midi controllers: to map as needed, knobs and fader reagents and precise, jogs lack precision

    SOUNDS

    the sound & h, eq super effective monitoring breath a little but nothing bad in sound (for which it is intended)
    The sound is warm and round it knocks, filters and eq are terrible
    with the tracks and master to 0 db, the master knob at 14h I sleep a djm 800 cleat

    OVERALL OPINION

    exellent value for money, no complaints about the sound and quality for the mapping c is a questionof taste, personally I prefer to customize it and it suits me perfectly. the lack of effect is compensated by u sound quality, filters and the top eq
    See less
  • tiefshwartztiefshwartz

    A nest problem!

    Allen & Heath Xone:4DPublished on 02/18/14 at 05:53
    (This content has been automatically translated from French)
    Yes it is rack and all that stuff but it remains a stew

    UTILIZATION

    It is simple when it's your 3rd xone 4D

    SOUNDS

    This console sounds correctly on a sound but forgot to plug in a pair of good monitoring above (Genelec) breath is disgusting.

    OVERALL OPINION

    To summarize I had a Xone 3D with Laquel I had that problem (soundcard HS HS fader and breath) chronologically she left 2 times in audiopole (beautiful unable band) and squarely at allen & heath UK to finally tell me that it was a factory defect and they could do nothing. I freed and loses € 1,000 in the process ... Few years and a few mixer later I bought a xone 4D thinking they had solved the problems, …
    Read more
    Yes it is rack and all that stuff but it remains a stew

    UTILIZATION

    It is simple when it's your 3rd xone 4D

    SOUNDS

    This console sounds correctly on a sound but forgot to plug in a pair of good monitoring above (Genelec) breath is disgusting.

    OVERALL OPINION

    To summarize I had a Xone 3D with Laquel I had that problem (soundcard HS HS fader and breath) chronologically she left 2 times in audiopole (beautiful unable band) and squarely at allen & heath UK to finally tell me that it was a factory defect and they could do nothing. I freed and loses € 1,000 in the process ... Few years and a few mixer later I bought a xone 4D thinking they had solved the problems, and there vim rebelotte 2 back service problems with the MIDI and the sound card, audiopole racketeering me money and Ultimately I end up with a table unusable and I get rid of pieces for € 400, € 1400 Lost Again!
    Then comes the 3rd Xone 4D that I bought new 3 years warranty at Woodbrass telling me that perhaps with another 4D I had not had a bowl and vim after 2 months of use due to large maximum once a week, I began to have crack, I lose the stereo fader after stroke and breath in filters ... Not to mention the general breath ... BACK SAV in these brailleurs of audiopole They pretend to repair and a month later I recovered my console serves me 2 times at most and vim rebelotte same problem, it is now back in audiopole which a slap on the wrist because I sent this EXPERIENCE A & H but still good here my turkey stuffing mix without obliged to rent and we will certainly send me this big shit that held three days until the security is finished and at that time I still resell for parts 400 balls.

    In short, make sure the table is unsaleable, everyone gets rid of, and you will always see in the ads table "revised" As is made simply is not revised it's just back for the 3rd time in audiopole and people got rid of as soon as possible!

    I invite you to see the coast plummets and the number of 4D for sale on leboncoin and audiofanzine, then pity not buy this shit and even general rule simply flee A & H that is now manufactured in China while it is worse than Pioneer.

    Rabatez you on the Formula Sound Rodec etc ...
    See less
  • stoneheartsstonehearts

    Very good mixer

    Allen & Heath Xone:4DPublished on 11/06/11 at 05:34
    (This content has been automatically translated from French)
    Yes the brackets are sold with connectors for RCA / XLR connections midi in / out jack and a 6.35 for connecting a pedal like the Pioneer EFX 1000 and also the USB it to an integrated sound card 24-bit 96 KHz for the sound is comparable to the 10 audio traktor. This is a table with 4 channels XLR master output Booth monitor output, 2 outputs and 2 inputs send return to connect the boxes and also effects the release of records is the same output not send two boxes of 'built-in effects

    UTILIZATION

    I have a little hassle to install the driver but it's all good for the manual I did not read and functions are simple

    SOUNDS

    yes equalizer is great and no breath

    OVERALL O…
    Read more
    Yes the brackets are sold with connectors for RCA / XLR connections midi in / out jack and a 6.35 for connecting a pedal like the Pioneer EFX 1000 and also the USB it to an integrated sound card 24-bit 96 KHz for the sound is comparable to the 10 audio traktor. This is a table with 4 channels XLR master output Booth monitor output, 2 outputs and 2 inputs send return to connect the boxes and also effects the release of records is the same output not send two boxes of 'built-in effects

    UTILIZATION

    I have a little hassle to install the driver but it's all good for the manual I did not read and functions are simple

    SOUNDS

    yes equalizer is great and no breath

    OVERALL OPINION

    1 week so 600/DJM DJM 800. Most filters are more beautiful than on the DJM 800 knobs less fragile and also the sound is also warmer than the Pioneer. The less just twelve o'clock the party that is not super easy to configure for value for money I would say very good since it is given to new 1200 EUROS. With the experience I do it again I would change this choice I have found my happiness but be careful I do not say what is better than the DJM 800 it's just that I changed my set up is all because the DJM 800 is a very good restaurant with what it takes or the right.
    See less
  • Piupiu@goaPiupiu@goa

    Allen & Heath Xone:4DPublished on 12/30/09 at 14:07
    (This content has been automatically translated from French)
    I wanted a mixer with at least part of separating
    So this table is perfect for my travels in bar atmosphere
    I use it with laptop

    The notebook is vraimment a 1 st prize (399 euros)
    Sempron 2.5 GHz
    3GB RAM
    250 HDD
    win xp
    I optimize for Traktor Pro

    When I have vraimment need more midi control I 'assigns a mpd 24 akai



    UTILIZATION

    I have installed the latest drivers on the manufacturer's website

    I use it exclusively with Traktor Pro

    With 4 decks of traktor + 4FX (including 1 and 3 chained advanced)

    Frequency 44.1 the process runs at 50% while the bottom has
    I was beyond 70% (predict a more powerful pc)

    latency is 5 ms

    SOUNDS

    Installation…
    Read more
    I wanted a mixer with at least part of separating
    So this table is perfect for my travels in bar atmosphere
    I use it with laptop

    The notebook is vraimment a 1 st prize (399 euros)
    Sempron 2.5 GHz
    3GB RAM
    250 HDD
    win xp
    I optimize for Traktor Pro

    When I have vraimment need more midi control I 'assigns a mpd 24 akai



    UTILIZATION

    I have installed the latest drivers on the manufacturer's website

    I use it exclusively with Traktor Pro

    With 4 decks of traktor + 4FX (including 1 and 3 chained advanced)

    Frequency 44.1 the process runs at 50% while the bottom has
    I was beyond 70% (predict a more powerful pc)

    latency is 5 ms

    SOUNDS

    Installation is simple and effective one-click and monitor indicators

    To provide for the mapping in traktor putting hands in the pie
    vraimment sucks because it is (I personally made a 2h + mapping .....)

    The manual is in English (I have to look for a manual french but not find) it's still simple

    OVERALL OPINION

    I didn 't try many high-end model (I have had the numark analog, behringer ddm 4000 ...)
    Eter J've seduced by the Xone 4d

    The price is in the same areas that the big brands (Pioneer, Denon ...) has 200 or 300 euros Near
    for use with my + functions noon (Senior I)
    and of course audio quality level that is the heavy (I mix electro house)
    I will ever choose NOT Nonon ....... as long as it's not cowardly

    I am building a blog dedicated to xone 4d

    https://hellpanzer.skyrock.com/
    See less
  • Anonymous

    Allen & Heath Xone:4DPublished on 02/04/10 at 07:34
    (This content has been automatically translated from French)
    4 channel analog mixer, 3 channels equipped with phono input, XLR outputs.
    3 band full cut EQs.
    2 FX in / out assignable.
    Sound Card USB 2.0 20-channel (8 +2 In / 8 +2 out@44.1kHz-96kHz)
    227 MIDI controls.
    2 filters S & H assignable VCA.
    XLR microphone input
    Headphone output 3.5 and 6.35

    No EQ on the master nor the booth, or headphones. Therefore include one or more parameters / graphics.

    UTILIZATION

    The beast is very fitted, so complex, especially at management level sound card in-out / analog in-out, but the manual is comprehensive and very clear. (I do not know if it is available in French).
    The location of the buttons is ideal. The quality of the faders and…
    Read more
    4 channel analog mixer, 3 channels equipped with phono input, XLR outputs.
    3 band full cut EQs.
    2 FX in / out assignable.
    Sound Card USB 2.0 20-channel (8 +2 In / 8 +2 out@44.1kHz-96kHz)
    227 MIDI controls.
    2 filters S & H assignable VCA.
    XLR microphone input
    Headphone output 3.5 and 6.35

    No EQ on the master nor the booth, or headphones. Therefore include one or more parameters / graphics.

    UTILIZATION

    The beast is very fitted, so complex, especially at management level sound card in-out / analog in-out, but the manual is comprehensive and very clear. (I do not know if it is available in French).
    The location of the buttons is ideal. The quality of the faders and knobs are the best. It is possible to change the crossfader with P & G. The assignment of the cross for each channel is via a tiny switch 3 positions (X / Y / Y) not practical at all, especially in the dark.
    MIDI controls such as knobs / faders on the mixer are operating at both firm and flexible, so quality.
    The meters are very accurate and good size.

    SOUNDS

    The audio quality is top. No buzz, hum, breath. The sound card is 24B/96Khz crystal. The analog inputs idem.
    Just a little jitter filters A & H without input and high volume headphone / master. (A table is made out of her ... but you have to find a defect)
    The EQs are very well made, and intersect at infinity.

    OVERALL OPINION

    After 5 months of testing, I'm very happy, and seeing the look of my top friends, even proud;)
    It must be said that besides being a very good restaurant is a nice table (long live the black light).

    The lack of EQ output is harmful if the PA does not have an EQ, but it's a table ultra pro, so the rack of effects and EQs must be present as it should. It also lacks a little EQ on the headphone output. M'enfin again y 'solutions.

    Regarding the use, I Traktorise with, and I remain convinced that the 4D is the best tool for that.
    After mapping all the desired functions, the workflow is impeccable.
    Considering the price / durability / functionality, I do not part with it anytime soon.
    See less
  • jmichel5005jmichel5005

    Allen & Heath Xone:4DPublished on 05/01/10 at 03:55
    (This content has been automatically translated from French)
    What characteristics have motivated your choice?
    Quality Allen & Heath

    What is your config (Motherboard / CPU / Ram / Disk ,...)?
    Used on a fixed dual core pc windows vista


    UTILIZATION

    The drivers are stable

    SOUNDS

    Yes the installation is done without problem

    The manual is zero, reduces to qeulques pages

    Noon is the mapping to be redone and is not simple. It is necessary to sweat it. For my part, I did not find the jog to the identical vinyl, rigging manual ...

    OVERALL OPINION

    few days

    I also use Scratch Live SL1

    The sound is good, the latency perfect, the quality of this stuff is
    the -: noon to redo the mapping and not simple

    The quality / pr…
    Read more
    What characteristics have motivated your choice?
    Quality Allen & Heath

    What is your config (Motherboard / CPU / Ram / Disk ,...)?
    Used on a fixed dual core pc windows vista


    UTILIZATION

    The drivers are stable

    SOUNDS

    Yes the installation is done without problem

    The manual is zero, reduces to qeulques pages

    Noon is the mapping to be redone and is not simple. It is necessary to sweat it. For my part, I did not find the jog to the identical vinyl, rigging manual ...

    OVERALL OPINION

    few days

    I also use Scratch Live SL1

    The sound is good, the latency perfect, the quality of this stuff is
    the -: noon to redo the mapping and not simple

    The quality / price is right

    I reiterate my choice without any problems.
    See less
  • Greg L-ZassGreg L-Zass

    Concentrated happiness.

    Allen & Heath Xone:4DPublished on 06/18/10 at 01:27
    (This content has been automatically translated from French)
    What characteristics have motivated your choice?

    AH quality, the fact that it is a hybrid of Quality Controllers / table. The number of summons noon, the sound card.

    With which instruments or systems (console, preamp, DTD ...) and you use the connection with what? ...

    Traktor Scratch Pro: Either full afternoon or timecode, see oldschool. It is lined with a st 100, synqxtrem1 a KP3. I used a few times in cubase or ableton with my master keyboard and I have not encountered any particular worries. The sound card is very good.

    # To what purpose?

    Make the sound. I try to use all the possibilities offered by this machine.
    # What is your config (Motherboard / CPU / Ram / Disk ,...)?

    X…
    Read more
    What characteristics have motivated your choice?

    AH quality, the fact that it is a hybrid of Quality Controllers / table. The number of summons noon, the sound card.

    With which instruments or systems (console, preamp, DTD ...) and you use the connection with what? ...

    Traktor Scratch Pro: Either full afternoon or timecode, see oldschool. It is lined with a st 100, synqxtrem1 a KP3. I used a few times in cubase or ableton with my master keyboard and I have not encountered any particular worries. The sound card is very good.

    # To what purpose?

    Make the sound. I try to use all the possibilities offered by this machine.
    # What is your config (Motherboard / CPU / Ram / Disk ,...)?

    Xp ram 32b/q6600/4go

    UTILIZATION



    * The drivers are stable?

    Yes
    * Are they often updated?

    We're not going to complain
    * What software do you use most often?

    Traktor Scratch Pro
    * What latency you get?

    5ms
    * How many tracks do you manage to record / playback simultaneously? ...

    I have not yet looking to kneel.


    SOUNDS

    # Installation is done it without problems?

    Installation yes. The MIDI mapping I just drooled. But it is a good time to prepare for everything to work with onions thereafter.

    # Have you experienced any incompatibilities?

    Not yet

    # The general pattern is easy?

    The MIDI mapping I just drooled. But it is a good time to prepare for everything to work with onions thereafter.
    # The manual is clear and sufficient?

    Yes

    OVERALL OPINION

    For how long have you been using it?

    10 months

    What is so special that you like best?

    Manufacturing quality and the sound that comes out of this little critter.

    the least?

    There have not much to reproach him. Going a little research, I would say the mapping equation afternoons and a hair too close to my ass tastes.

    Did you try many other models before getting this one?

    Xone 42/Djm 700/Xone92/Numark 5000fx/Mackie ..... Brief

    What is your opinion about the value for the price?

    Correct

    Knowing what you know now, would you make the same choice?

    Yes if the 92 did not exist. : P

    See less