Gibson SJ-200 - "Sounds BIG."
The SJ 200 is an acoustic guitar from Gibson. It has a Fishman Aura Ellipse Pickup system. The body is a bound jumbo size made from curly maple, and the top is a solid Sitka spruce piece. The neck is…
Gibson Hummingbird - "Doesn't get much better."
This guitar is made in Boseman, MT (older models at Nashville, TN, USA at Gibson's highly esteemed factory). The body is mahogany, and the top is solid Adirondack spruce. The neck is set in (at the 1…
Epiphone EL-00 - "Another good acoustic from Epiphone."
This guitar from Epiphone has a mahogany body with a solid spruce top, a mahogany neck with rosewood fretboard and 24.75 inch scale, 19 frets total but the neck joint at the 14th fret, and chrome har…
Taylor GS Mini - "Mini-size, maxi-value!"
Model: GS Mini Shape: Grand Symphony Back/Sides: Sapele Laminate Top: Solid Sitka Spruce Cutaway: None Headstock Overlay: Lexan Finish: Satin Rosette: 3-ring Neck: Sapele Nut Width: 1-11/16"…
Martin & Co Standard D-18 (2012-2017) - nickname009's review
MODEL Martin D-18 CONSTRUCTION: Mahogany Blocks/Dovetail Neck Joint BODY SIZE: D-14 Fret TOP: Solid Sitka Spruce ROSETTE: Style 18 TOP BRACING PATTERN: Standard ''X'' Scalloped, Forward Sh…
Martin & Co Standard D-35 (1993-2004) - nickname009's review
MODEL Martin D-35 CONSTRUCTION: Mahogany Blocks/Dovetail Neck Joint BODY SIZE: D-14 Fret TOP: Solid Sitka Spruce ROSETTE: Style 28 TOP BRACING PATTERN: Standard ''X'' TOP BRACES: Solid S…
Vester VJ - "Amazing!"
VJ348 model, made in Korea, "hand crafted," 20 frets, golden lubricated machine heads. Rose in mother-of-pearl at the 12th fret. I looked and looked, but couldn't find any craftsmanship defects, the…
Taylor Baritone-6 - "Deep and low"
This is the deep and low model for the Taylor guitars. This guitar is an instrument that gives you that deep low tone that fills the room up very nicely. it is a guitar that is not an instrument that…
Taylor 814 - "better come and get it"
Taylor guitars has to be a few best acoustic guitar manufacturer on the planet. They have such a variety in range of instruments to match whatever players style and budget maybe. This is the 814 Tayl…
Yamaha JR2 - "Nice baby"
Yamaha is a company that builds pretty inexpensive guitar instruments for the budgeted musician. They're pretty well known for their bass guitars as well as their acoustic guitars. This is there JR t…
Martin & Co Standard D-28 (1993-2004) - nickname009's review
Solid Sitka spruce top Black and white rosette Black pickguard X-bracing Rosewood back and sides Ebony fingerboard and bridge Neck width at nut 1-11/16" 25.4" scale…
Taylor GS Mini - nickname009's review
Model: GS Mini Shape: Grand Symphony Back/Sides: Sapele Laminate Top: Solid Sitka Spruce Cutaway: None Headstock Overlay: Lexan Finish: Satin Rosette: 3-ring N…
Guild D4 - "as good as any other"
The Guild D4 was made in the USA and is not an electric - acoustic so it doesn't have a pick up or any control knobs. To me, its fine that it is just acoustic as I use it for recording only, as it is…
Tacoma Guitars DR28 - " Excellent Dreadnought"
translatedGuitar upscale manufactured in the United States. But relatively unknown brand of excellent craftsmanship, acquired and distributed by Fender. Not to be confused with the DM28, which looks the same b…
Castelluccia g6b - sarbacanne_775's review
translatedCastellucia Classic model Giambattista G6B, made in France. Size: 4/4 Scale: 650 Bottom and sides: Indian Rosewood Soundboard: Solid Spruce with dam Evolution Neck: Cedar with Ebony reinf…
Alhambra Guitars 2 C - Tybostrat's review
translatedClassical Guitar Solid Cedar Mahogany neck, rosewood fingerboard Sapele back and sides. "Made In Spain" UTILIZATION The glaze is thin enough to allow fine slipped, the handle is relative…
Suzuki Three S F-250 - " A little viellotte, but if warm"
translatedHere's what's made more upscale in the days when guitars were made in Japan by former makers of Nagoya, converted back to subcontractors and then launching their own brands. Of the three models of 12…
Epiphone EJ-200 - " Great guitar!"
translatedMade in the United States is a Jumbo with an easel-type mustache. Maple body Spruce "select spruce top" Maple neck, rosewood fingerboard "Rosewood / Crown" Mechanical Groover Natural finish…
Terada FW-657 S - tchentchen's review
translatedvery easy to handle tune longer than a martin UTILIZATION good ergonomics good access to acute put a game if you want super light bender is because the long diap its very rich and bea…
Martin & Co 00-15M - " never disappointing"
translatedHandle very easy UTILIZATION Ergonomic very pleasant to play, a round, soft ideal in picking and blues SOUNDS somorités medium and fine sharp and well defined She has a good cost projec…
Geronimo Mateos Jazz A - Lefebvre Nicolas's review
translatedGypsy jazz guitar smallmouth. Lutherie really impeccable, the choice of wood finish varnish. Selected spruce top AAA Back and sides such as three-ply veneer Selmer, poplar, maple and rosewood P…
The Loar LH-200 - " sofa guitar"
translatedmade in China no defects for this price range that's rare UTILIZATION handle fairly large and comfortable very easy it is very light which bodes well for its SOUNDS perfect for having a han…
Gibson CSM Songmaker grand concert - " Wonderful value for money"
translatedEverything is said in its electro, except that there is no cutaway. • Table massive Sitka Spruce • back and sides Mahogany • Mahogany • Ebony • Traditional Gibson Ebony Bridge • Tuners S…
Art & Lutherie Folk Cedar - " A blues machine!"
translatedMade in Quebec La Patrie. Solid cedar top, wild cherry back and sides, flamed maple neck, 14 frets before the body, rosewood fingerboard, tune to 631 mm. No electronics. The shape is reminiscent of b…
Aria 9450 - Lefebvre Nicolas's review
translatedJapanese manufacturing impeccable: back in 3 parts maple, maple sides, solid spruce top beautiful, mahogany neck, rosewood fingerboard and bridge, maple headstock veneer, net cash and handle ... A be…
