All user reviews of 5/5 for the Marshall 8008

2x80 watts transistor
Valvestate a button (lamp simulation)
Input and output jack
2 Separate volumes

UTILIZATION

No manual
Very easy just 2 volumes

SOUNDS

It is a power amp transistor side so it is very neutral color
The switch adds a touch Valvestate Marshall not transcendent but not bad

OVERALL OPINION

I have for many years, never worries, is the power, I use it with a 2x12 cabinet and a valvefx in NoS, and repeated in concert, for the price it is really very good.
Small flat, rather to my config (2x12), a low volume chamber, the sound can appear without dynamic, so attention chamber test that can disappoint. We must put the volume at 9 o'clock the very least to feel the good momentum of the craft.

A transistor amp rack unit 2x80watts under 4ohms, 8ohms 2x40watts under
not affect just one switch at the rear Valvestate supposed simulated a tube stage (useless).
2 volume knobs, one for each channel.
two inputs two outputs.

UTILIZATION

Paas need is a manual power amps, enough volume at home or in repeats.

SOUNDS

then the sound is very neutral, fearful of any type of preamps.
metal to rock to the funck soul, very versatile.

I board connected over a GX700, a GTpro, a head-AMPIRE behringer v, a v-amp pro, a v-amp, a pod pro and the result is great in the sense that it respects the connected equipment.

I above which employs many ibanez js 1200's nickel

OVERALL OPINION

then I am separated as more repeat, live or studio.
to have tested several types of amplifiers, for me the config preamp / power amp is the best.
this is a very good amp. value for money impeccable.

IMPORTANT:
I advice to find cabs at 4 ohms as the amp is more suitable in this config for my part I was rising in PARALLEL celestion rocket 50 and I had twice to 100 watts into 4 ohms hp with amps issuing 2x80watts is total happiness!
in this config it I played 1/3 volume and it was hard with the preamp output to 60%.

Transistor amp 2x80W
min 4ohm/canal
Jack connectors only
Volume control only
Valvestate switch on the back

UTILIZATION

Bought used, the manual was not provided but it is not necessary in my opinion.
Very simple configuration, you plug and play.
Before 8008 I played a combo VS65R of the same brand, I found that grain Valvestate when the switch is on, I'm not too homesick.
The sound is good although a few additional watts would have been welcome.

SOUNDS

On a rock, punk, electro it does its job.
The Valvestate switch on the back and strengthens the grain Marshall in my case is a nice touch. When the off, the sound is more neutral or at least less distinctive, but it's subtle ...
May be a lack of power but for the home studio, it's enough.
Troubleshooting used to amplify a bass in a Line 6 Pod Pro, but also the fact that the lack of power becomes more problematic for those who love the low round and deep.
For my part coupled with a V-Amp Pro Berhinger and a Harley Benton 4x12 Vintage 30, the rendering is very correct.
I just plug it into a 4x12 412F-BK Bugera brand new, this is not as good (maybe lapping of HP, to see ...) but not bad either.

OVERALL OPINION

Used for 6 years in a home studio with various preamps and different cabs, this amp is an excellent value for money.
For the home studio and rehearsal is great, simple and effective.
A good rugged and reliable cheap in secondhand.
If he had let me go, I look for another to replace it.

Transistor power amplifier

2 entries
2 outputs
and a switch to switch Valvestate which 'simulates the lamps'
An on / off button and voila ...

UTILIZATION

is simple .... you plug it amplifies ...

SOUNDS

This amp does not alter the tint son.il very slightly on the position 'Valvestate' but it's almost inaudible (to me, ears more expert would perhaps the difference ...)

OVERALL OPINION

I use it for over 15yrs Repeat. concert is always the power is sufficient to enter in my Marshall 1922 (2x12 "). sound I never give up. Moreover avecen entry my POD XT Live I create a stereo +> 2 thanks to the coup volume settings I can run straight left one stronger than another to accentuate the effect of stereo effects like flanger.

This power amp rack transistor has a power of 2 x 80W.
It is very easy to connect and use, it has two inputs and two outputs jack jack. Regarding the settings, you can adjust the volume by two knobs (again I can not judge well because I had mine for OCCAZ crack pots and a few

UTILIZATION

That's what I disai, you can adjust the volume in stereo with two pots. The manual (if there is one and if we can not understand the use we never know) I have ever had.
However, it lacks settings.

SOUNDS

With this amp (coupled with a multi purpose Boss GX-700 for the pub) I can get a fat distortion well suited to the metal that I play a lot (and yes, in general there's no need to be a beast to play the metal) but it is a versatile amp that fits in any type of game

OVERALL OPINION

Well I finished, I have nothing else to say. very good amp is a normal MARSHALL.

2 * 80w transistors
2 input jacks
2 output jacks to HP
Selection Mode or classic Valvestate

Nothing special. Attention, no fan, so make sure it does not clump the milieu of a pile of other racks (I'm cram once the fawn).

Jolie faade Marshall Gold

(For our answer to the comment below, my knobs have never made a sound while moving)

UTILIZATION

Nothing simpler.
One branch, and climb the two volume knobs (left and right).

SOUNDS

Used with 1922 and 1960 Marshall cabinets (2x12 and 4x12 Celestion).
Really good. The sound is prcis, and Marshall sounds. If one has a prampli lamp is made carrment is even monstrous.
Submitted power and it is a battery cover aisment (still happy ...).
Valvestate position adds to his personality (typ Marshall) and I only use this method of amplification. The other is more neutral.
The highs are prcis, monstrous bass is perfect for playing mtal or other forms of hard rock. Also perfect for the punk rock genre blink182. For blues or jazz is something else, but if you chose a prampli and guitar based sound that you want out, you come aisment anything you want.

OVERALL OPINION

I use it for about 2 years and I think it sounds great. For the price, it Arelle Marshall sound.
I play a Gibson Les Paul, a pdalier Boss GT-3 directly plugged into the amp and I go out baffles on Marshall and the sound is good l. Despite the lack of rel prampli get low I get any sound prs.
For the price, size, look, sound ... trs is good. If you and your purist perfectionist, take a vritable amp lamp, but prfrez a good prampli trs + prampli this amp rather than a means and a light amplifier.

See other post

UTILIZATION

Trs simple configuration: two volume pots (one per channel) and a selector
to switch to linear or Valvestate.

SOUNDS

I only play the brutal death and I think this amp is perfect
Valvestate mode it uses exactly the sound of the VS100 ...

So advice to metalheads to get a rack is not CHRE IDAL ...

I think with a good lamp prampli a must here must ....

2x80 watts is more than enough .. I use a quarter of its power
dj ass well and it is.

OVERALL OPINION

What's more quality unbeatable price ratio, robust, easy to use.
happiness.

- Amp transistor
- 2 * 80w
- Easy plug
- Easy rgler also, Valvestate mode or normal switch controllable by

UTILIZATION

- Nothing more bte connect, APRS in two pots for volume!
- Sound is not bad at all, the VS color fawn Marshall sound! I always leave in VS Custom
- Mme not need a manual for!

SOUNDS

- I have not had the opportunity to try tens of Poweramp, but it is good trs!
- I think it easily rpond all styles, since it can also sound trs neutral in normal mode!

OVERALL OPINION

- I use it for some months now! I just ... for now! =)
-

The power amp SERIES ValveState Marshall, the black version I personal, so as everyone knows, is the transistor.
It is 2 * 80 Watts.
Level connectivity, 2 inputs, 2 outputs and the turn is played is perfect
There is just a SETTING THE gain per channel (volume made ...)

All you need is l.

UTILIZATION

As said prcdement, can not be simpler.
This is just PowerAmp, so for the "good sound" ca dpend also pramp ...
The manual ... What ...

SOUNDS

I bought this to make me a PowerAmp ch'ti rpter for home and troubleshoot for small rooms (well yes, 100Watts lamp at home, it makes the neighbors scream! !)
I use to amplify a Vamp Pro, which it is not too bad, I redcouvert the stuff that sounds a little less synthetic like that. Everything is connected in a 2 * 12.

The Marshall brings a really good dynamics (indeed, on another forum, many use this power with great pramps lamps and everything he does change for the world ...).
I get all kinds of sounds thanks to Vamp (which will soon be replaced with something light, I covet a Mesa Studio Pramp)
For effects, I expect my multi-effects, TC Electronic (I hte of discovering this brand ...) happens in a few days.

OVERALL OPINION

I for a week.
Indeed, APRS have acquired a head lamp (which I love), I thought, 'Why not ch'ti Rack relief. "
I dj for the Vamp PRO pramp, lacked a PowerAmp, that is perfect over the price ...
I would do without this choice hsiter, Sounds rib, it makes a good job and it was powerful enough to play in groups!