Log in
EN
FR

Humbucker guitar pickups in single coil format

50 products found

Filter
Sort by
Evaluation
  • Reviewed or not
  • Editor’s award
  • Reviewed by Audiofanzine
Availability
  • Available or not
  • Sold new or used
  • Sold new
  • Sold used
Must-have products
  • All products
  • Flagship products
  • Best rated products
  • Hot products
  • Popular products
Price
  • Freeware
  • Low-cost (< $100)
  • Mid-range ($100 - $150)
  • Premium (> $150)
€
Clear
Sort by
  • Popularity
  • User ratings
  • Price - low to high
  • Price - high to low
  • Used price, increasing
  • Used price, decreasing
  • Name (from A to Z)
  • Name (from Z to A)
  • Added on
Sort results
  • Popularity
  • User ratings
  • Price - low to high
  • Price - high to low
  • Used price, increasing
  • Used price, decreasing
  • Name (from A to Z)
  • Name (from Z to A)
  • Added on
Filter results 50 results found
Evaluation
Availability
Must-have products
Price
  • Freeware
  • Low-cost (< $100)
  • Mid-range ($100 - $150)
  • Premium (> $150)
Show results

The best Humbucker guitar pickups in single coil format reviews

The reviews Audiofanzine members found the most helpful.
  • « Oldschool PAF Sound »

    The DiMarzio Pro Track is a sound for those looking for that oldschool PAF sound but with a little more power. It features two blade rails like many other single coil humbucker DiMarzios have, four conductor wiring and a ceramic magnet. The Pro Track is a pickup that sounds like the old school PAFs. It’s not like the PAF Pro that they offer, but it does have some similarities. Instead, it’s more like the old PAF they used to offer. It has an awesome vowely quality, the low end is boosted just a tad, along with the midrange, and the treble is pushed back ever so slightly. This helps make it sound huge, and it works quite nicely for jazz, rock and even metal. The pickup is a very medium output pickup. If you’re looking for something hotter, you’ll probably want to try the Fast Track 2. The pickup can be split for a nice single coil sound or run in parallel for a more telecaster kinda sound. The pickup is very versatile and works in pretty much any position. If you put it in the neck, it’ll be a transparent sounding PAF; if you put it in the bridge, it’ll sound big without sounding overly compressed. The best thing about this is that it works in any wood combination out there. None of the frequencies are too overbearing, so it really lets the wood show off their natural characteristics without enhancing unwanted frequencies. If you’re looking for a more traditional style sounding humbucker to throw in your strat, you should try out this pickup. Adding a push/pull pot or mini toggle switch helps make this pickup even more versatile. If you put it in the bridge, try using a Cruiser Neck. If you put it in the neck, try something hotter like a Tone Zone S, Super Distortion S, Fast Track 2, etc.

  • « Bill Lawrence L-250 »

    I have four of these pickups that I acquired from different places over the last 16 years: Stewart-MacDonald, a music store, and two used ones from Used Gear By Mail. They ranged in price from $20-$40. I have three of them in a Fernandes Strat copy and one in the neck position of a home made guitar (with a full size Schaller humbucker in the bridge position). I bought them because I wanted pickups that would sound like single coils but without the hum. These are the L-250's made by the Bill Lawrence Guitar Pickup Company out of California. This is the company that Bill Lawrence (whose real name is Willi Stich) started many years ago, and used to be called Lawrence Sound Research. Bill has not been part of the company since 1984 - it has been run since then by one of his original partners. This model has been in production since at least the early 80's because they are mentioned (with photo) in "Guitar Electronics for Musicians" that was published in 1983. These L-250's are single coil size humbuckers, with a single blade instead of polepieces. The coils are wound vertically and placed on either side of the blade, not on top of each other. Even though these pickups are humbuckers, they really nail the single coil sound! They are clear and punchy, sensitive to picking technique, and reproduce harmonics beautifully. The in-between pickup settings on my Strat offer all the funky sounds of a single coil equipped guitar. These pickups have a little more output than the stock single coils and have a little more warmth. The bridge pickup is much fatter sounding than the stock pickup. I actually use it by itself now! I play rock, blues, jazz, latin (Santana) and these pickups work well for every style. Overdriven or clean, they sound great. There is nothing that I do not like about these pickups. These pickups are built like a tank. The coils are embedded in epoxy (?) in the cover so they are essentially one-piece construction. No moving parts! These pickups are fantastic sounding and only cost about $40 new. They are a great bargain for anyone looking for quiet, Strat style replacement pickups. The website for this company is www.billlawrenceusa.com. I want to add a note about the confusion surrounding the two "Bill Lawrence" companies. A few years back, Bill (Willi Stich) registered "Bill Lawrence" as a "service" mark for his pickup design/consulting services, to market his design services to guitar manufacturers. He never registered it as a "trade" mark to market his pickups, or any other product. But he has been using the federal registration symbol (circle around the "R") next to the "Bill Lawrence" mark in his print ads and on his website, to market his pickups anyway, which is against USPTO rules (you can only use a registered mark for the purpose it was registered for). This has caused a lot of people to believe that "Bill Lawrence" is a registered trademark for the pickups that Bill currently manufactures, when it is not. Bill makes great pickups, and he even has a very different version of the L-250 (with TWO blades) that I hear sounds very good, but the other Bill Lawrence company, that makes the pickup I reviewed above, has the right to the Bill Lawrence name for marketing their pickups (even though they have not registered it with the USPTO - which is not required for a trademark to be valid). You can verify this information by visiting the US Patent and Trademark Office website at www.uspto.gov and searching for the "Bill Lawrence" trademark. This review was originally published on http://www.musicgearreview.com

  • « First pickup I've owned that made me a better player. »

    Danny Gatton is one of the greatest guitar players to ever walk this planet. This pickup was designed for him, with massive input for him, and it delivers with fantastic tone, just as one would expect. The pickup is designed for Telecaster guitars, and is fashioned around an idea that Danny Gatton had - he wanted an old Charlie Christian pickup sound in his Telecaster, but without having to rout it out. Joe Barden came up with many designs until Danny was happy, and this pickup is the result of that partnership. The pickup is actually a humbucker, with two very small coils, wound around a blade. The original prototypes actually used a stop sign that was cut into small strips to use as the blade design! The blades help impart a smooth evenness in the pickups, while the dual coils ensure maximum noise-cancelling, to keep everything dead quiet. I really feel that this is honestly the best pickup I have ever used. Tone here is the name of the game, folks, as well as responsiveness! These pickups were meant to deliver absolutely every small nuance of Danny's playing, and boy, did he ever nuance. This pickup will not cover up mistakes - it will shine a big spotlight on them, and that, to me, is a fantastic pickup. I want my guitars to sound exactly like what I am doing to them, so I need them to be accurate, and this literally helps me become a better player. The pickup itself has a very high-fidelity quality, which sounds great for that accuracy I was talking about, but for someone that likes their pickup to flatter them instead, all they'd need do is roll off the tone knob about 30%. This makes the pickup take on a more vintage quality, as opposed to the sheer unadulterated evenness of wide open tone control tone.

  • « Similar to a Super Distortion »

    Despite its name, the Fast Track 2 wasn’t really a variation on the Cruiser in terms of sound. This is a much more powerful pickup and is almost on the exact opposite of the tonal spectrum compared to the Cruiser. It features dual blade rails like many other DiMarzio single coil humbuckers, four conductor wiring and a ceramic magnet. The Fast Track 2 is for people who want a pickup that has a somewhat Super Distortion vibe going on. It’s very hot, has tons of bass, tons of mids and a pushed back treble. This is pretty much strictly a bridge pickup given its high output. The split coil tones sound great, and it’s not too bad in parallel, either. Originally, I’d say that if you were a fan of the Super Distortion, this would be your pickup. However, DiMarzio now has the Super Distortion S on the market. Because of that, this model kinda lost its place in DiMarzio’s line up. Both the Fast Track 2 and Super Distortion S sounds pretty similar. The main difference between the two, besides overall output, is that the Fast Track 2 sounds a bit more like the original oldchool PAFs in terms of getting that “vowely” sound. This pickup works best with 500k pots, so be sure you’re running a setup so that this can see 500k in some way. 250k pots make this sound too dark. If you’re looking for a high output, fat and heavy midrange single coil sized humbucker, this pickup, along with the Super Distortion S, are worth checking out. The best guitars for this would be guitars made out of alder, maple, walnut and other woods with more pronounced treble. It tends to sound a bit “too much” when in mahogany, but all pieces of wood are different.

  • « Tight and bright »

    The DiMarzio Fast Track 1 was the first revision of the Cruiser to come along. The Cruiser was always known for having a powerful single coil or P90 vibe but without the hum. This is more like a hotrodded version of that original Cruiser. It features blade rails like many other DIMarzio single coil humbuckers, four conductor wiring and a ceramic magnet. When DiMarzio went to tweak the Cruiser, they came up with this pickup. It’s hotter, but it still maintains the character of the Cruiser is that it’s very clean and bright sounding. Compared to the Cruiser, it has a touch less treble and a touch more bass + mids, but the main difference is the output. The output is kicked up a good bit compared to the old Cruiser. Split sounds are fairly bright, and I haven’t tried it in parallel, so I can’t comment on that. The pickup works well in any position, but I recommend watching out what woods you pair this thing with. Because of the abundance of treble, it can sound bright in woods such as maple, alder, walnut and the such. The ceramic magnet also adds a tighter sound, but they tend to sound a little less alive than the Alnico counterparts. If you run it in the bridge, try using a lower output neck pickup so you’re not overpowering the bridge. Despite its output increase, this is still a very medium output pickup. If you found yourself wanting a more powerful Cruiser with a touch more bass and mids, this is worth checking out. Both of those pickups tend to have this kinda Humbucker From Hell vibe going on, but the treble isn’t nearly as extreme as the original pickup. Just be careful what woods you put this in. Mahogany and basswood will probably be best, but alder could work nicely if it’s a more neutral piece.

  • phraseland's review

    This test is not about the whole set but the Seymour Duncan Little59 by itself. This pickup is perfect for a real vintage 70s rock sound. A lot of mids in the sound – just like guitarists are used from a bridge humbucker on a Les Paul. The basses are nice and punchy and the sound contains a lot of sustain. Leads sing nicely and you can play with a lot of dynamics. What’s special about this pickup is that it can be combined with normal singlecoil pickups. This can be done because it doesn’t deliver too much output – this makes it also suited for quite a few vintage guitars.

  • « Perhaps my favorite Rock 'N Roll strat single-coil. »

    It's funny. There are three versions of the Dimarzio Air Norton pickup: The original Humbucker-sized Air Norton, the Strat-sized Air Norton S, and the Telecaster Air Norton T. Now, I've got all three installed in different guitars. I liked the Air Norton when I originally installed it in the bridge of an Ibanez ARX300, but I REALLY like the Air Norton S and T packages. I don't know what happens when they shrink the form factor of this pickup, but it's something magical. Now I prefer the S and T models over the original. Having said that, I've got the Air Norton S installed in the bridge position of a Squier strat that I modified and WOW!! It's not over-the-top like the Super Distortion S; it provides a good bit more crunch than a standard strat pickup (280 mV output, 11.21K DC Resistance). The BMT EQ curve of 6.5/7/4.5 is tight, focused, and has an excellent growl about it. Four-conductor wiring means you don't have to sacrifice your position 2 tone, and what's more, when paired with the Dimarzio RWRP True Velvet Middle (as it is in this guitar) you get a cool out-of-phase tone that just screams Bohemian Rhapsody. Even though the output is just below that of a standard PAF, plugged straight into a high-gain head you can easily get the impression that this could be a boosted standard strat pickup. Most prominently, however, is the absolutely fabulous Rock ‘N Roll tone of this pickup. You know how everyone raves about the classic rock tones like a Les Paul plugged straight into a Marshall, etc. When I play this guitar with this pickup, just about anything I plug into with this guitar seems to ooze that crunchy, gritty, old-time Rock ‘N Roll vibe. It doesn’t push so hard that it puts you into “Metal” territory, but you can go anywhere from the 60’s to the 80’s with ease. It would be very easy to say that the Air Norton S is something like a PAF, but it just has something MORE. I guess you’d call it the “X” factor. Whatever it is, the Air Norton S has it. Give it a try, rock the house, and see for yourself.

  • « Not the exact Tone Zone sound »

    Dimarzio is a modern pickup maker and they are known for that. The Tone Zone is one of their most unique designs. Dimarzio is known for their modern sounds and the Tone Zone has one of the most modern sounds of their line up. The Tone Zone came out in 1991 and immediately was known for its vowel like open wah sound. There is a story going around that EVH helped design the pickup and I tend to believe this. When you play with it in the bridge you cant help but think of those 80s metal tones with the loads of chorus on them. In the bridge position of a guitar with a brighter wood it would be really good for 80s metal or even modern metal when used with the right amp and rig. This is the Tone Zone shrunk down into a single coil size. You still get all the crazy tone but with a slightly different voicing to compensate for the fact that it will be in a strat. Also when Dimarzio makes the single coil sized humbuckers they almost always use ceramic magnets even If the original pickup didnt have them, so the sound ends up being slightly different in that way as well. You get a ton of mid range with this pickup. This goes along with tons of crazy harmonics that this pickup gives out. It is like a Dimarzio FRED but not as crazy. I found the FRED almost unusable because of all the extra sounds that it put out but the Tone Zone has just the right amount of extra character. If you are looking for the cool Tone Zone sound in your strat here is an easy way to get close without cutting up your guitar. I would recommend just getting a new pickguard and putting in a real Tone Zone because this single coil while close does not get the exact Tone Zone sound.

  • « 70s rock tone for a strat »

    Dimarzio is a modern pickup maker and they are known for that. But they have some old models still around from when they first started. Their most famous old model is the Super Distortion. This pickup was made back in the day when there were not really many after market pickups out on the market. The pickup was designed just to push hard any amp it encoutered and come through with a dirty sound. The pickup had tons of low end and did not clean up well at all. Lots of people who used these in the 70s still use them today as they can still get the job done and have a good sound all their own. This pickup is the sound of 70s rock and roll. Now you can get all this old school Dimarzio tone in the size of a single coil. The pickup features 4 conductor wiring with a ceramic magnet. The 4 conductor wiring lets you split the pickup which is something you cannot do with a normal super distortion. So this pickup is essentially a Super Distortion Dual Sound S. The output of the pickup is 13k so it is not super hot but you get kind of an old school hotness. The tone of the pickup is slightly tweaked to take into account the factt hat it will be in the bridge position of a strat. Because this pickup is for going into a strat they dialed back some of the high end to make the sound less brittle. This pickup has huge low end and mid range. This is good because strats are normally lacking in the bottom end. This pickup fills that void perfectly. The low end is great but it is still pretty tight. If you have a strat and want the sound of 70s rock in it this is an easy way to get that tone.

  • sarouwoman's review

    - How long have you been using the product? I just got it today. This morning. - Which features do you like the most / the least? It's very round and warm. It's like a humbucker with a twangy touch to it. Great for clean sounds and excellent for distortions. - Did you try any other models before buying it? I had already tested the Tone Zone S and little 59. I replaced my Seymour with this one. It's 10 times better! I already had a Savae Babeast at the bridge. A Mexican Strat with SP. - How would you rate its value for money? The prices have gone down, but not the quality! I have two SPs and they are really magical and not expensive (40 bucks for the humbucker .... o_O ) - Based on your experience, would you choose this product again? Yes. Although I'm still saving for a deluxe!

  • « A confused pickup »

    The Seymour Duncan Cool Rails is a unique take on single coil sized humbuckers. The main goal was to create a lower output single coil humbucker in contrast to the Hot Rails which was blazing hot. It features two blade rails like many of these single coil humbuckers have, four conductor wiring and a ceramic magnet. While the Cool Rails called is a lower output single coil humbucker, but it’s still got some output going on. It can work in any position, but I find it best to be suited for the middle position – and I’ll get to that in a bit. It is a bit brighter and clearer than the Hot Rails, which can be a good thing for some and a bad thing for others. Here’s the issue I have with this pickup. It sounds like a mix between a single coil and a humbucker. It can’t decide how it wants to sound, so it’s trying to sound like bot.h at the same time. Consequently, I feel it fails in both sounds. It’s not fat enough to be a humbucker, and it doesn’t have the awesome grind like single coils do. It just sounds kinda bland to me. Split sounds and parallel sounds aren’t really anything special, either. In the neck, it’s bright and kinda okay. In the bridge, it’s too bright and lacks output. That’s why I put it in the position I use the least – the middle position. The lower output allows it to be somewhat useful in the middle position for some clean tones. If you’re looking for a single coil sized humbucker, there are better ones out there. I tend to recommend the Hot Rails the most if you’re looking for a single coil sized humbucker in the Seymour Duncan line. Some people dig this pickup, but no matter what wood I tried it in, it was the same result every time.

  • « Single coil vibe without the noise »

    The DiMarzio Cruiser Neck was invented for those who were looking for a single coil or P90 kinda vibe but with the benefits of a humbucker. This is like a more modern single coil for today’s world. It features blade rails like so many other DiMarzio pickups, four conductor wiring and a ceramic magnet. The Cruiser Neck has a very strong single coil/P90 vibe going on. Most of those pickups have this “vowely” quality going on, and this does that in spades. However, unlike a normal single coil, this pickup is not overly bright. It does have some pronounced treble, but it’s not piercing like so many other single coils can get. The bass and midrange are just enough to where it would be perfect for the neck. If you’ve ever heard Andy Timmons’ tone, you’ve heard this pickup being used in action. Split tones sound great, as do parallel tones. The noiseless benefits are a welcome addition. So many other single coils have so much noise that they’re almost unusable. The unwound strings have this really fat sound going on that helps make it sound bigger than a normal single coil, but the unwound strings still retain a nice sparkle that many famous single coils deliver. This works in most any wood, but I tend to recommend it with woods like mahogany as they help beef out the low end and midrange. The treble in this is still fairly pronounced, so if you’re looking for a pickup that is super fat, you might want to try something else. This is also a very medium output pickup, so it tends to work best in the neck and/or middle position. It just lacks the oomph needed for most situations in the bridge, which I guess is why they added the word “neck” in the name.