UA-101 classified ad
Alerte nouvelle annonceImages
Reviews
4.7/5(11 reviews)
64 %
18 %
18 %
Write a user review
Audiofanzine FR
Published on 11/29/08 at 12:17
(Originally written by cyrilcliment/translated from Audiofanzine FR)
My setup:MacBook Intel Core 2 Duo with 2 GB Ram
It works PERFECTLY!
Mic and bass or bass plus 3 synths. I use it to replace a mixer + patchbay because it allows me to freely route the signal to the sound card via a small, latency-free software. It's a great advantage compared to the FA101, which requires you to route the signal with the sequencer of your DAW.
So it allows me to process my voice with my Micromodular without having to turn the computer on!
UTILIZATION
Very easy installation. The monitoring software makes a mixer needless. It's great to mix several synths or to route the signals freely...…
My setup:MacBook Intel Core 2 Duo with 2 GB Ram
It works PERFECTLY!
Mic and bass or bass plus 3 synths. I use it to replace a mixer + patchbay because it allows me to freely route the signal to the sound card via a small, latency-free software. It's a great advantage compared to the FA101, which requires you to route the signal with the sequencer of your DAW.
So it allows me to process my voice with my Micromodular without having to turn the computer on!
UTILIZATION
Very easy installation. The monitoring software makes a mixer needless. It's great to mix several synths or to route the signals freely...…
Read more
(Originally written by cyrilcliment/translated from Audiofanzine FR)
My setup:MacBook Intel Core 2 Duo with 2 GB Ram
It works PERFECTLY!
Mic and bass or bass plus 3 synths. I use it to replace a mixer + patchbay because it allows me to freely route the signal to the sound card via a small, latency-free software. It's a great advantage compared to the FA101, which requires you to route the signal with the sequencer of your DAW.
So it allows me to process my voice with my Micromodular without having to turn the computer on!
UTILIZATION
Very easy installation. The monitoring software makes a mixer needless. It's great to mix several synths or to route the signals freely between inputs and outputs...
The user's manual is clear and the product is easy to use.
GETTING STARTED
I use it with LOGIC PRO at 24bit/44.1kHz. with a 64 sample buffer size to record and monitor (via software) eight tracks without crashes or unwanted noise. More than enough for my needs.
OVERALL OPINION
I've been using it for six months. I previously tested several Firewire sound cards, which didn't work properly with Leopard and my Lucent chipset. I bought the UA 101 to connect a mic + a guitar or a bass + 3 synths. Great reliability and latency even though I'm not confident about USB solutions...
Very good value for money. The manufacturing quality seems to be good, the sound is excellent (no buzz or hum except with preamps at max). The front Hi-Z input is very convenient. You can use it as a 10 in/out standalone mixer/patchbay!!
It's a product you can forget about, it has no useless features, it just works. I won't buy another sound card in a long time. I love the small routing/monitoring software. This sound card replaced a mixer/patchbay/sound card setup. It's exactly the tool I needed and I love it!!!
My setup:MacBook Intel Core 2 Duo with 2 GB Ram
It works PERFECTLY!
Mic and bass or bass plus 3 synths. I use it to replace a mixer + patchbay because it allows me to freely route the signal to the sound card via a small, latency-free software. It's a great advantage compared to the FA101, which requires you to route the signal with the sequencer of your DAW.
So it allows me to process my voice with my Micromodular without having to turn the computer on!
UTILIZATION
Very easy installation. The monitoring software makes a mixer needless. It's great to mix several synths or to route the signals freely between inputs and outputs...
The user's manual is clear and the product is easy to use.
GETTING STARTED
I use it with LOGIC PRO at 24bit/44.1kHz. with a 64 sample buffer size to record and monitor (via software) eight tracks without crashes or unwanted noise. More than enough for my needs.
OVERALL OPINION
I've been using it for six months. I previously tested several Firewire sound cards, which didn't work properly with Leopard and my Lucent chipset. I bought the UA 101 to connect a mic + a guitar or a bass + 3 synths. Great reliability and latency even though I'm not confident about USB solutions...
Very good value for money. The manufacturing quality seems to be good, the sound is excellent (no buzz or hum except with preamps at max). The front Hi-Z input is very convenient. You can use it as a 10 in/out standalone mixer/patchbay!!
It's a product you can forget about, it has no useless features, it just works. I won't buy another sound card in a long time. I love the small routing/monitoring software. This sound card replaced a mixer/patchbay/sound card setup. It's exactly the tool I needed and I love it!!!
See less
00
»
Ptitroc
Published on 12/28/05 at 12:26 (This content has been automatically translated from French)
No, this is a joke ....
C'tait just to see if the "review" of this card n'tait not stuck !!!!
So nobody uses this UA-101? Some copies have sold very well in the right? Not very good user Audiofanzine ????
Go a little advice - siouplais ...
USE
The USB 2 is it the FW ???
IMPLEMENTATION
A "control panel" more fun than the FA-101 (which does not have one ...)
But is it effective ...
Latency and then? Good question ...
NOTICE GLOBAL
RAS
C'tait just to see if the "review" of this card n'tait not stuck !!!!
So nobody uses this UA-101? Some copies have sold very well in the right? Not very good user Audiofanzine ????
Go a little advice - siouplais ...
USE
The USB 2 is it the FW ???
IMPLEMENTATION
A "control panel" more fun than the FA-101 (which does not have one ...)
But is it effective ...
Latency and then? Good question ...
NOTICE GLOBAL
RAS
00
»
Spacionot (ex Cola Verde)
Published on 04/19/14 at 17:50 (This content has been automatically translated from French)
used for monitoring of multi-channel (it works well and the sound that comes out is good). I thought to use it to make the sound but the analog-to-digital converters (audio input) are not good and have disappointed me.
UTILIZATION
used with FLStudio and Reaper particular drivers are good and some reach a low enough latency (7 ms) on the other hand it consumes more CPU with high latency (35ms)
GETTING STARTED
very simple and works flawlessly
OVERALL OPINION
used for 6 years, the audio outputs are good and the monitoring function is convenient (via youtube listening Reaper who gets the "monitor" output and dispatch to my 2 speaker systems)
HOWEVER AN converters (ADC) are BAD...…
UTILIZATION
used with FLStudio and Reaper particular drivers are good and some reach a low enough latency (7 ms) on the other hand it consumes more CPU with high latency (35ms)
GETTING STARTED
very simple and works flawlessly
OVERALL OPINION
used for 6 years, the audio outputs are good and the monitoring function is convenient (via youtube listening Reaper who gets the "monitor" output and dispatch to my 2 speaker systems)
HOWEVER AN converters (ADC) are BAD...…
Read more
used for monitoring of multi-channel (it works well and the sound that comes out is good). I thought to use it to make the sound but the analog-to-digital converters (audio input) are not good and have disappointed me.
UTILIZATION
used with FLStudio and Reaper particular drivers are good and some reach a low enough latency (7 ms) on the other hand it consumes more CPU with high latency (35ms)
GETTING STARTED
very simple and works flawlessly
OVERALL OPINION
used for 6 years, the audio outputs are good and the monitoring function is convenient (via youtube listening Reaper who gets the "monitor" output and dispatch to my 2 speaker systems)
HOWEVER AN converters (ADC) are BAD and respect me, no recording (mic or line) with this card.
UTILIZATION
used with FLStudio and Reaper particular drivers are good and some reach a low enough latency (7 ms) on the other hand it consumes more CPU with high latency (35ms)
GETTING STARTED
very simple and works flawlessly
OVERALL OPINION
used for 6 years, the audio outputs are good and the monitoring function is convenient (via youtube listening Reaper who gets the "monitor" output and dispatch to my 2 speaker systems)
HOWEVER AN converters (ADC) are BAD and respect me, no recording (mic or line) with this card.
See less
20
»
OSR
good product
Published on 01/25/12 at 08:48 (This content has been automatically translated from French)the number of input and output (10 and 10) is what I needed for my config live
UTILIZATION
the driver is stable and low latency
I utillise Ableton Live (I use the 8 output jack at the same ten for hours without any problem and I also use it with virtual dj (for vinyl timecode)
GETTING STARTED
installation and simple configuration
OVERALL OPINION
I use depui 3 years
I had the ua101 before (which scorched due to an error on my part (firewire plugged in upside down))
what I like in a RAPORT AU 101 is a small software to configure it is convenient (there is not the ua 101)
RAPORT the money is correct
I do it again this choice! …
UTILIZATION
the driver is stable and low latency
I utillise Ableton Live (I use the 8 output jack at the same ten for hours without any problem and I also use it with virtual dj (for vinyl timecode)
GETTING STARTED
installation and simple configuration
OVERALL OPINION
I use depui 3 years
I had the ua101 before (which scorched due to an error on my part (firewire plugged in upside down))
what I like in a RAPORT AU 101 is a small software to configure it is convenient (there is not the ua 101)
RAPORT the money is correct
I do it again this choice! …
Read more
the number of input and output (10 and 10) is what I needed for my config live
UTILIZATION
the driver is stable and low latency
I utillise Ableton Live (I use the 8 output jack at the same ten for hours without any problem and I also use it with virtual dj (for vinyl timecode)
GETTING STARTED
installation and simple configuration
OVERALL OPINION
I use depui 3 years
I had the ua101 before (which scorched due to an error on my part (firewire plugged in upside down))
what I like in a RAPORT AU 101 is a small software to configure it is convenient (there is not the ua 101)
RAPORT the money is correct
I do it again this choice!
UTILIZATION
the driver is stable and low latency
I utillise Ableton Live (I use the 8 output jack at the same ten for hours without any problem and I also use it with virtual dj (for vinyl timecode)
GETTING STARTED
installation and simple configuration
OVERALL OPINION
I use depui 3 years
I had the ua101 before (which scorched due to an error on my part (firewire plugged in upside down))
what I like in a RAPORT AU 101 is a small software to configure it is convenient (there is not the ua 101)
RAPORT the money is correct
I do it again this choice!
See less
04
»
Tech. sheet
- Manufacturer: Edirol
- Model: UA-101
- Series: UA
- Category: USB audio interfaces
- Added in our database on: 04/06/2005
We have no technical specifications for this product
but your help will be much welcomed
»
Manuals and other files
Other categories in Audio Interfaces
Other names: ua 101, ua101