All user reviews of 3/5 for the Peavey Sanpera I

I used the Sanpera 1 for a little over a year. The first I bought slammed four months later, even recognized by the amp (Peavey Vypyr 120). I did spent a guarantee and after more than 3 months of waiting (!), I received the new one and it still works today.

Remember that? Apart clean Peavey (I do not) kikoo design, it does its job. It very simply accesses a preset to another kick. on the other hand, when you need to perform another action (activate the delay, effect, change banks, activate the loop, ...) must be made at least two actions pids. Full piece is unmanageable.

Add to that a lag time of about 1/2 seconds of between 2 switch between presets and you have won everything.

In terms of price / quality ratio, I think it is not worth. So invest a little more for the Sanpera 2, although more efficient and ergonomic.
So no, I will not repeat that choice, and for good reason, since I bought the Sanpera 2, it is much better.

I just buy it and try it.
Pros:
- Cheap ... well not too expensive ...
- Good wha-wha and volume
- LOOP (still not easy to use it)

Weaknesses:
- Be supported as the animal to trigger the wha (maybe it will get better Apers uses)
- The unmanageable volume loop recorded. Basically it is quite strong and the improvisations are made over a smaller volume. This is also a mystery because of the videos on Youtube is not the problem ... it is in any case a great default ... which reduces the attractiveness of the effect.

So in the end very well to change the patch, play wha pedal and volume.

Addition to the 20 August 09: the pedal will not turn on the ignition with the amp ... you have to unplug the cable and plug one or two times to make it DEIGNE life ... and 2 points lower (on from 7 to 5)!