Epiphone Steel String Guitars Epiphone Dreadnought Steel String Guitars
  • Increase or decrease font size
  • RSS

Epiphone Dreadnought Steel String Guitars user reviews

  • Epiphone FT-150 Bard

    Epiphone FT-150 Bard - "Epiphone FT-150 Bard" has images

    06/26/19

    Ok so I just picked up this old Japanese Epiphone really inexpensive here in Bulgaria. It was a mess. Cleaned it up and took it to my Luthier. We replaced the tunig keys with inexpensive replacements from Ebay UK and refretted the instrument. After s…

  • Epiphone Hummingbird

    Epiphone Hummingbird - "Buy something else"

    03/27/13

    Made in Indonesia. Very low quality spruce top. UTILIZATION Terrible fret job. I returned it and the replacement wasn't much better. SOUNDS This is a very poorly built guitar. Buy an Ibanez or Yamaha instead. I sold mine after 7 months and b…

  • Epiphone DR-100

    Epiphone DR-100 - "not expensive and solid tones"

    03/14/13

    The Epiphone DR-100 (Ebony) is a 6 string guitar that has a spruce top and it is mahogany on the sides and back. The fret board is rosewood and the neck is mahogany as well. You can actually purchase this guitar in Natural, Vintage Burst and Mahogany…

  • Epiphone PR-200

    Epiphone PR-200 - "very cheap"

    06/12/12

    I remember purchasing the PR 200 back in 99 I think could have been 98. I got it used and only had to pay around 100 dollars for it which was a steal at the time. I have even seen people selling these online and at pawn shops and second hand stores f…

  • Epiphone FT-79 Texan

    Epiphone FT-79 Texan - moosers's review

    02/28/11

    The Epiphone FT-79 Texan is a dreadnought style acoustic guitar from the 1960's. I believe the Texan guitars were made as early as the 1950's, but the particular one that I've used was from the mid 60's. The guitar is only acoustic as it's doesn't …

  • Epiphone Hummingbird

    Epiphone Hummingbird - "Epiphone Hummingbird"

    05/27/10

    I bought this guitar with the sunburst finish. It is a dreadnought, so it has a bigger body, and it is not a cutaway. The top is solid Sitka spruce and the sides are mahogany laminate. The custom hummingbird pick guard is a beautiful touch. I had bee…

  • Epiphone PR-200

    Epiphone PR-200 - Scribbler12000's review

    04/23/09

    Slim neck. Jumbo-style frets, too big, but at the time I didn't know any other models. With smaller frets this guitar would've been amazing! THE problem of this guitar has always been the neck: It bends a bit at least twice a year, with every season…

  • Epiphone PR-100

    Epiphone PR-100 - Heavyspender's review

    04/23/08

    This guitar was made in China. It has 22 frets and is a straight acoustic guitar. (i.e. no electrical components.) The bridge is stock plastic (?) bridge. No setting controls, as it is a straight acoustic. It has a mahogany neck and a rosewood fr…

  • Epiphone Hummingbird

    Epiphone Hummingbird - goodbyebluesky's review

    04/16/08

    The Epiphone Hummingbird HS is made in China. It has a 25.5" scale with frets. It has mahogany sides and back with a solid spruce top, and a rosewood fingerboard. It features pretty standard chrome hardware, split paralellogram fingerboard inlay…

  • Epiphone PR-200

    Epiphone PR-200 - littlewing68's review

    11/04/04

    I had a problem with the strings because of fret buzz. I switched to a 12-54 (or 56) gauge string set and have no problems anymore. USE - Is the neck comfortable? Yes, it resembles a Les Paul a lot. Which means you must like LP necks :-) - Is…