Log in
EN
FR

Reverbs

213 products found

Sort results
  • Popularity
  • User ratings
  • Price - low to high
  • Price - high to low
  • Used price, increasing
  • Used price, decreasing
  • Name (from A to Z)
  • Name (from Z to A)
  • Added on

The best Reverbs reviews

The reviews Audiofanzine members found the most helpful.
  • moosers's review

    The Yamaha R1000 is a digital reverb unit that is enclosed in a single rack space rack mountable unit. It has 1/4 inch inputs and outputs in the back as well as a 1/4 inch output in the front of it for a foot switch. UTILIZATION The configuration of the Yamaha R1000 is pretty easy to figure out overall, as there are no tricks involved at all. From left to right, the unit has four buttons to choose the reverb mode, a meter to show the output level, and then has parameters in the form of knobs for input level, three equalization knobs for low, mid, and high, a knob for setting the reverb level in the mix and then an overall output level knob. It also has buttons to put the EQ in or out as well as a button for power. I don't have the manual for the Yamaha R1000, so I can't speak to how complete it is. SOUND QUALITY The sound quality of the Yamaha R1000 is pretty good but is nothing to write home about in my opinion. It has a good amount of different reverb sounds but to me none of them stand out all that much. I have used this reverb on a number of different instruments including for vocals, drums, and guitars, and while I'm usually satisfied with the sounds I can get, nothing on this unit really sounds above average. OVERALL OPINION I've been using the Yamaha R1000 for about two years and while I like the unit as a whole I don't use it all that often because I would rather use a reverb plug-in for convenience. To me I can get a comparable if not better sound from a reverb plug-in and it just isn't worth it to use a piece of outboard gear if I don't have to. Because of this, the Yamaha R1000 isn't all that expensive if you can come across a used one and is a good choice because of this cheap price. Overall, the Yamaha R1000 is a nice sounding reverb unit that should only be used if you are really into outboard reverb.

  • phraseland's review

    The reason why I bought the Nanoverb was to have a small portable unit I could take with me to gigs. Quite often at smaller venues I see that there is maybe one single Reverb Unit for the mixing board - or even none at all. As it is not really the job of the sound technician to supply the equipment (unless of course it is a requirement) it still is good to have a plan B around. So I purchased the Nanoverb from Alesis. It is really straightforward and the sound is not astonishing - but the quality is enough for most live applications. The effects can't really be edited. There is an 'Adjust' knob that sets a fixed parameter (i.e. frequency of Chorus and so on) but that doesn't really qualify for editing. Also not Presets can be saved. This unit is truly 'quick-and-dirty'. The whole thing is of course digital and has a stereo in, stereo out and bypass out on the back. UTILIZATION As I already mentioned the unit is truly straightforward. You have five knobs on the front: Input, Mix, Output, FX select and Adjust. So basically choose one of the 16 presets (Chorus, Delay, Flange, Rotary and Reverbs) and see what the Adjust knob does to the signal. That's really it - the manual really isn't needed. The unit is built very well and the five knobs give a very easy overview on the parameters - this is what makes it excellent for Live. If you want to you could build 3 NanoVerbs into one Rackspace. SOUND QUALITY I found the Chorus, Flange and Rotary to be ok at best. I don't know where I would be using them - surely not in the studio. And Live I just don't really need these kinds of effects. Delay and Reverb are very nice for Live applications - again in the studio I am not so sure. I think I would prefer a Plug-In or look for a more specific effects unit. The reverb sounds are quite dense and you need to be careful to not make the signal too wet. In the right ratio they are very usefull - too much and the signal is lost in a sea of sound. OVERALL OPINION I bought this unit a few years ago and must say that I have not used it as much as I intended to. It is however nice and small and Alesis has always been very good at making good quality devices for a decent price. I don't think I would buy it again as there are simply better solutions out today. On the other hand I am not willing to sell it because its construction is very solid and it is very easy to adjust the sound.

  • prysm's review

    Reverbs, delays, echos, chorus, flange and combos of all. 99 presets that are all adjustable by 2 knobs on front panel, plus you can get at more parameters by pushing a few buttons and can save if you want.Or use the midi interface. 16 bit A/D D/A processor with 44.1 kHZ sampling rate. Stereo in & out via 1/4" , single rack space, external power transformer. UTILIZATION I mainly use this for reverb, which it does well. The 2 knobs & 1 button on front give me quick access to programs , predelay & decay. The other controls knobs are input level, mix,output level. I'm not a big fan of having to read a 100 page instruction book to navigate the control of some units I've seen. I have the manual, I flipped though it once. Not really needed unless you want to use the midi controls. SOUND QUALITY Like I said before I only have really used the reverbs. I use this on my home stereo system to give the music more life. The reverbs are good for the price of this unit. It's not a high end Lexicon sound but does the job very well. I can't see myself ever selling it for any reason. OVERALL OPINION I've had this about 3 years without any problems, bought it used. It's got good reverbs & easy to use controls. I have a few other reverbs, an Alesis microverb 3 & a Lexicon Alex. This one I think is better than the Alesis , but not as good as the Lexicon. For the price the sound is very good. Unless you step up to something in the $600 & up range this one does just fine. Yamaha makes good stuff, never had problems with any of their products. You turn them on and they work.

  • « Complex but awesome »

    In my setup, I use both the QV2 and a Lexicon MPX1 and even in that situation, the Quadraverb 2 doesn't disappoint. The reverb is sufficiently lush and soft, although indeed a bit metallic at times, if you feed it sharp sounds (like digital synths). It is however not at all sounding cheap and I've previously owned cheap Alesis and Lexicon reverbs to compare it with. The other effects are very suitable for the synthesizer music I make. That said, editing is rather difficult to edit, with up to 8 processing steps that all have their own parameter. Current prices however, are insane. I've bought mine many years back for EUR 50,- and currently they go for anything between 300 and 900 US dollars. They're definitely not worth that kind of money, better go for a Lexicon MPX1 (or Lexicon PCM90, Eventide Space or Strymon BigSky if you're only after reverbs) instead.

  • « Best Ever »

    The sound quality is the best reverb on the market even by todays standards. I have used a strymon big sky and multiple reverb pedals, and reverb racks ( FX500 yamaha, ALESIS MIDIVERB 2, ALESIS Quadraverb ( original, and 2.0 version with resonaters, and ring mod, sampling) I also use an AXE FX 2 XL PLUS and have reverbs sounds in there too that I combine/ also have presets with no reverbs, and just an amp block/fx loop. The sound quality blows everything out of the water/sounds so nice. I'd suggest putting the mix levels around 30-60% range for best results. I have lately connected my strymon timeline delay in the feedback loop mode ( fx loop on the pedal itself that syncs another pedals modulation sound with the repeats in the delay) I use the quadraverb in a stereo flange mode in the feedback loop of the strymon, then the strymon into the send of my axe fx 2 xl plus, and the lexicon pcm70 in the return. I got some extremely beautiful/crazy sounds better than anything I have ever crafted before from pedals, or just pedals and axe fx/or quadraverb/timeline with axe fx 2. The quadraverb and timeline in my axe fx 2 sound fantastic but have a more lo fi quality like slowdive, the verve, and bands from that era. The lexicon pcm70 takes me directly to Robin Guthrie Cocteau Twins tone/Pink Floyd Tone from the late 80's and 90's. Both are great tool separately, ( i havent tried them together, but I did use the quadraverb in the feedback loop of the timeline) I normally just will probably use the timeline without the feedback loop set up ( unless I am doing layering/trying to get a really specific sound with my modulation/fx) I love the lexicon with clean ambient chorus echoes, delays, and concert hall, tiled room. The fidelity is off the charts and better than what I have heard from the strymon big sky in my opinion ( big sky has some cool sounds/interesting things but the sound quality of the lexicon is amazing, that is why they cost 3000k in 1986 and the circuit board is 4-6 times the size of the strymon board) The combination of axe fx 2, lexicon pcm70,and my strymon timeline make for stellar tones in shoegaze, ambient, jazz land, all the way to alternative, indie, classic rock, shred rock, metal etc. I use all this into a metric halo uln2 via AES out of my axe fx 2 xl plus. One disclaimer is the menu system is a bit odd compared to other rack units like the alesis quadraverb, midiverb, yamaha fx 500, axe fx 2. I managed to hook the midi out cable from my midi interface ( saffire pro 24) and send it into the midi in on the PCM 70, I then found the sysex files for v 3.0 an v2.0 so I now have all the presets from version 2/3 and still have spaces left to store more registers. You must go to control program 1.7 or 0.7, then on the control program load that, then hit the program LED/button to turn that off, then click in the number 3 so it'd be 1.3 and set your midi to OMNI. With a mac get Sysex Librarian or Sys OX on PC, connect your interface to your computer and have the midi cable set up as I described earlier with the changes on the board made. To get the device ready to receive messages all you should have to do is hit PLAY midi messages in sysex librarian ( I have a mac, haven't done it on PC). For a while I had sat stumped with trying to figure out how to get it to receive messages/the version 2 and 3 programs. My mistake was thinking there was a sysex utility or command like that on the PCM 70 rack itself. VERY IMPORTANT TO SELECT MIDI in the program sysex librarian, it is in the middle of the window and says select device or device ready with a single bar line. Click that when your interface/midi connections are set up and everything is turned on ( rack/interface) Then hit the play button, the screen will then flash on the PCM 70 and you will have all the new presets. I'd suggest getting use to a command set up turning buttons on and off ( program/register) to get to different menus,parameter controls. It can be overwhelming at first, but if you follow these steps you will succeed. I struggled very hard on the internet, because no one mentioned how to get it to receive messages, but it is as simple as making sure the SYSEx application you are using has MIDI selected. If you are debating on getting a strymon big sky or eventide space, I'd get the PCM70 all day, better fidelity to my ears and it has delays and amazing mod fxand cool resonators, and although it doesnt do shimmer and some odder sounds. you can always use plugins, or other pedals that will do the same job better/or close. I am stoked I have 3 amazing recording configurations with rack setups/pedals. ( plus a million more with guitar choice, tuning, string guage, frequency tuning calibration, axe fx parameters, dAW parameters, the options are endless)

  • moosers's review

    Alesis' The Wedge is a mini reverb effects device that is designed to sit on top of your desktop. It's an older unit, but still sounds good and is quite easy to use. It's quite compact and features an easy to use interface without too much clutter at all. It's digital reverb here and isn't rackable as it's more or less a portable device. UTILIZATION Using the Alesis The Wedge couldn't be much simpler. You can scroll through the presets with the toggle wheel or make your own. It's got four sliders for the controlling the level of reverbs and also has a series of buttons for programming, storing, and further controlling the effects. I've never had a look at a manual for The Wedge, nor do I think one is really necessary. SOUND QUALITY While not incredible sounding, Alesis' The Wedge still sounds quite good and has some very useful reverb. It's got pretty much the full spectrum of different types of reverbs on here, or at least I didn't notice any major ones missing. The studio I work at has one of these on hand, although I didn't discover it until recently as it was kind of hidden in our back closet. It's definitely not the most up to date piece of gear, but still has worth and sounds good. Perhaps if we didn't have a real plate reverb it would see a bit more use. OVERALL OPINION Alesis' The Wedge is a great way to get some nice sounding reverbs in a compact device at a cheap price. For most, it's probably going to be more efficient and effective to get a nice reverb plug-in, but this is going to be cheaper. I'd check it out if you're able but it's not that readily available, so most will be taking a shot in the dark buying it. More times than not it'll be worth it, but I'd rather have a nice plug-in myself...

  • moosers's review

    The Alto Alphaverb a digital reverb and other effects processor, best suited for use in a home studio setting. It's an 18 bit processor, although now they have a newer version of this which is 40 bits. I haven't used the newer one, so I won't be able to compare the two here. As far as connections go, it's got 1/4" jacks for inputs and outputs on each of the two channels and isn't rack mountable as it only takes up about a third the size of a single rack space. UTILIZATION You don't need to know all that much in order to use the Alto Alphaverb, as it's pretty simple piece of gear, which I don't think is an accident at all. It's got sixteen different preset effects to choose from, the majority of which are for different types of reverbs. It's also got parameters for setting the input, output, and mix levels. A manual shouldn't be necessary considering how simple a make up this is. SOUND QUALITY While not awful, the general sound of the Alto Alphaverb isn't anything to write home about. I definitely wouldn't use it in a professional studio environment, but in a home studio setting you can probably get away with it. Even so, I've heard many reverb and other effects plug-ins out there that sound better than this that I would rather use for both convenience and quality. I will say that the reverbs are probably the most realistic on here, along with the chorus, flanger, and rotary effects. While this is a quick and easy way to get some effects, it's still easier to use a plug-in. However, if you're in a live sound setting, this is a good way to get some simple digital effects for a cheap price. OVERALL OPINION If you're looking for a multi effects hardware processor, the Alto Alphaverb will do the job more times than not, but there are definitely better options out there. If you're looking for a something for your home studio, this will work, but I'd highly encourage you to go the plug-in route as it's easier in the end and will give you much more flexibility. You can definitely get a decent multi effects plug-in for this same price...

  • moosers's review

    The Alesis MicroVerb is a compact reverberation box that can be used in the studio or on the stage. I've only used this little reverb box in the recording studio for getting some quick verb, but it's certainly suitable for any sort of use. There are a number of different version of the MicroVerb, but this review is for the original. We have one of these in one of the smaller studios in the studio complex where I work, and it's already hooked up to the patch bay so I don't know the connections in the back since I haven't had a need to hook it up. It isn't rackmountable exactly, as it takes up about a third the size of a single rack mountable space. UTILIZATION The configuration of the Alesis MicroVerb is quite simple. There isn't much to using it at all, as it only has a few different parameters to work with. This simple make up is the reason I like using it for getting a quick reverb sound, as otherwise I don't find it to be incredibly useful. There are a number of modes to choose from, including a variety of large and small reverb room sizes, two gate reverbs, and a reverse reverb mode. It also has parameters for input, mix, and output. A manual isn't needed, although I haven't seen one so I can't speak to how well it's put together or not. SOUND QUALITY While not the most impressive sounding reverb out there, for a small compact box with a good amount of different sounds, the Alesis MicroVerb gets the job done just fine. I don't think that I would use it for printing any reverb, but I use it a lot just for getting a quick sound to listen to in the studio and then later I'll print reverb with the real plate reverb that we have. I like the larger room reverb sounds the best, but the reverse is awesome sounding as well. In general the sounds aren't the most realistic, but are certainly more than useful. OVERALL OPINION The Alesis MicroVerb has become somewhat obsolete, as there are many reverb plug-ins out there that are capable of getting these sort of sounds and better. However, it is a cool little box and I do use it on occasion if I'm looking for this sort of sound. While I must admit that it doesn't make it on too many recordings that I've done, I still enjoy using it as it's nice to have for a quick auxiliary reverb if I don't want to use a plug-in or I'm in a room that doesn't have a plate reverb. All in all, while I can't say I'd recommend buying one, the MicroVerb is a cool little reverb that will still see some use out there...

  • moosers's review

    Studio Technologies' EcoPlate II is a real plate reverb that is to be used in the recording studio. On the EcoPlate itself, it says it was made by Programming Technologies, which was some sort of a subset of Studio Technologies. We've got one of these at the studio where I work, and it's definitely some of the best sounding reverb that I've ever heard. For those who don't how a real analog plate reverb works, it's actually a huge plate that sits inside a box and wavers to give you reverb. Many studios will have their plate reverbs in the basement or in a remote location compared to the control room, but we've got ours right outside the control room door. This is similar to the EMT 140 plate, but is actually supposed to be improved, although having used both of these I don't think I'd be able to tell too much of a difference. We have this hooked up to the patch bay, so I'm not really sure what kinds of connections it has on board. This definitely isn't rack mountable! UTILIZATION There isn't much at all that you need to know about using the Studio Technologies EcoPlate II. We have this hooked up into an auxiliary channel on our Neve console, so you just set the level of how much reverb you want on the board. There aren't any parameters or anything. A manual won't be necessary unless you're having a technical or set up issue. SOUND QUALITY Without a doubt, save for an EMT 140, the Studio Technologies EcoPlate II is the best sounding reverb I've used to date. It just sounds so real and natural. It's almost hard to describe the depth and fullness of this reverb sound, but as soon as you hear it applied to something, you'll understand completely. The EcoPlate II, and plate reverbs in general, are great for a variety of situations, but I especially love using the EcoPlate on drums, vocals, and electric guitars. Having said this, the EcoPlate II is going to sound great on whatever you use it with. OVERALL OPINION There definitely aren't too many Studio Technologies EcoPlates out there anymore, as it would be somewhat hard to get your hands on one of these if you wanted to. They are pretty old and must be pretty hard to maintain since they are so big. I also doubt that there are many technicians out there who could work on this if you did have a problem. Luckily, where I'm working has one and it definitely sees a lot of use. If you're ever in a studio that has one of these and you need some reverb, this is the best you're going to find anywhere!

  • moosers's review

    The Lexicon 960L is a full blown digital effects unit and system. It is a very complete and thorough piece of gear, and is really its own system into itself. The 960L has all sorts of different effects ranging from reverbs to modulation effects. It comes in two pieces - with the rack mountable box itself and a controller that looks like a mini mixing board. This is definitely a unique design and is unlike any other effects system that I've seen. UTILIZATION Setting up the Lexicon 960L isn't very easy, although since I wasn't around when they installed this in the studio that I've used it in, I can't speak about the process at any sort of length. However, once you do have it up and running, I think you'll find that using it isn't all that hard. There is a ton amount of control over the different effects, it is really just a matter of learning the interface and getting used to the different screens. The manual for the 960L is very complete and thorough and is a very good thing to have around when trying to learn how to use this. SOUND QUALITY The tones that are possible with the Lexicon 960L are definitely sounds that you would expect from a high quality Lexicon unit. Of course the reverb sounds are really where the 960L earns its worth, but you've got just about every type of sound I can think of with the 960L. Everything comes in crystal clear, as each effect is certainly of a very high quality. Having control with the remote is really awesome, as it gives you complete control in the palms of your hands. OVERALL OPINION You've got 16 channels of I/O with the Lexicon 960L, which is really what makes this unit what it is. It also makes it a very expensive effects unit! This is definitely designed for professionals in mind, and I wouldn't ever recommend this for a home studio owner as it is simply too pricey. It would of course be a nice thing to have, but isn't a necessity since you can get these sorts of sounds for cheaper inside of the box, although they might not sound as great. If you're looking for the ultimate effects unit in one place, the Lexicon 960L is as good of any way to go.

  • moosers's review

    The Yamaha REV7 is a digital reverb unit in the form of a rackable piece of outboard gear. It will take up two rack spaces and I believe it has both 1/4 inch and XLR connections, but I'm not 100% sure - I use this in a studio where the REV 7 was pre-mounted. UTILIZATION The configuration of the Yamaha REV 7 is the units worst quality, as it is pretty hard to follow. Like most early digital units, the menus are somewhat hard to follow. There are a lot of sections on this unit that I have never used because I'm not sure how they work. This being said, I usually use this to get a basic reverb sound. It is easy to get your typical reverb sounds, but it can be somewhat hard to follow the deeper you go. I don't have a manual for this, but it would definitely be helpful when learning this machine. SOUND QUALITY The reverb effects from the Yamaha REV 7 digital reveb are good and usable, but I wouldn't call the effects great. I have used this unit on everything from lead vocals and back up vocals to guitar and have found it useful in a few different applications. While the reverb is useful and sound pretty good, it isn't the best outboard reverb I have used by any stretch and actually prefer a few different reverb plug-ins over this unit as well. OVERALL OPINION I've been using the Yamaha REV 7 digital reverb for about four or five years and while it has served me well and has been useful, I don't use it all that much for a simple reason. While the sound quality of this unit is pretty good, unless an outboard reverb is top notch, I find myself using plug-ins more and more as I have found some reverb plug-ins sound better than digital reverbs like this one and are much easier to use. I suspect that sub par effect outboard gear like this will die out as plug-ins sound better and better.

  • « Good Memories! Used This a Lot! »

    I was a young kid looking to make sick beats in the early-mid 1990's on a super shoestring budget. A little Mackie mixer, a few cheap Radio Shack mics, a 386 computer to store tiny samples, a DCC (Yes! A DCC!), and a DA-88. In that pile was the BOSS RV-1000 reverb. A little store had this on clearance for about $100 around 1995. I grabbed it, and was very happy with it. It was straightforward, easy to use, and saw a lot of use. It also had its serious downsides. The presets were just that. No tweaking, etc. What you selected, is what you got. The wet/dry knob was nice. The pre and db switch was helpful, too. Lots of my very horrible recordings utilized different wet/dry settings with lots of left/right sweeping panning. Apparently, wild left right made it better, lol I also discovered why it was on clearance. It saw better days, and had horrible background hiss. Some presets were worse than others. The hall was less noticeable than the plate setting, for example. I have no idea why that was. Either because it was lower end, my gain was too high, or something was wrong with it. I am sure it was the latter. Again, that thing must of been kicked around a lot. I am surprised to see this unit on here. That takes me way back. Such good memories.