Log in
EN
FR

Solid-State Guitar Preamps

186 products found

Filter
Sort by
Evaluation
  • Reviewed or not
  • Editor’s award
  • Reviewed by Audiofanzine
Availability
  • Available or not
  • Sold new or used
  • Sold new
  • Sold used
Must-have products
  • All products
  • Flagship products
  • Best rated products
  • Hot products
  • Popular products
Price
  • Freeware
  • Low-cost (< $250)
  • Mid-range ($250 - $350)
  • Premium (> $350)
€
Clear
Sort by
  • Popularity
  • User ratings
  • Price - low to high
  • Price - high to low
  • Used price, increasing
  • Used price, decreasing
  • Name (from A to Z)
  • Name (from Z to A)
  • Added on
Sort results
  • Popularity
  • User ratings
  • Price - low to high
  • Price - high to low
  • Used price, increasing
  • Used price, decreasing
  • Name (from A to Z)
  • Name (from Z to A)
  • Added on
Filter results 186 results found
Evaluation
Availability
Must-have products
Price
  • Freeware
  • Low-cost (< $250)
  • Mid-range ($250 - $350)
  • Premium (> $350)
Show results

The best Solid-State Guitar Preamps reviews

The reviews Audiofanzine members found the most helpful.
  • songboy's review

    This unit is Transistor amplification. This is designed to be used for an Acoustic guitar with a pick up primarily so it has only a 1/4" input. According to the manual, this unit's max output is +18dBu, but it does say that this "may vary due to control settings." All I know is that it is loud enough when I use it live or in a recording setting. As for controls, you have "Gain" or course, then you have the "Low Contour" knob which adjusts the the low frequency (50Hz) by adding 10dBu or taking away 10dBu. The next knob is the "Definition" which is the primary control of the "BBE Process." This tightens up the Low end and improves the clarity of the High end, which in effect makes the whole spectrum sound clearer. Next to that is the toggle switch for the Definition knob or BBE Process. This is nice to have so you can A/B the sound and hear exactly what the BBE Process is doing to your guitar signal. Next you have the EQ section which consists of a "Level", and a "Frequency" knob. The first controls the level of the Peak Frequency and the latter defines that Frequency (500Hz-2kHz). Next is the Notch filter section which consists of a "Gain" knob that adjust the frequency of the filter (85Hz-250Hz) and a button to toggle it off and on. The only effect you are going to get out of this unit is a cleaner sounding guitar. UTILIZATION Yes, you can easily get a good sound out of this unit. In fact, the moment you plug your guitar in, you will notice a difference, at least I did. There are only 6 parameters to mess with. Once you get the hang of what each one does, you will have no problem dialing in the right sound for your guitar. There is not Keyboard on this device, this must be a mistake. Yes, the manual is clear and very sufficient. When I first got this unit, I was unfamiliar with BBE products. After reading the short (15 pages) manual, I felt well informed and ready to use the device with confidence. SOUNDS I use this with a Martin D-16 and a variety of Basses (Fender JP-90, Carvin 6 String Fretless, and a Peavey Soundgear). The only sound you are going to get out of this unit is a well defined tone. I use this to reduce the mud from all the instruments I use. I use it to brighten up my Martin D-16, its all mahogany so it has a very dark tone in the first place. I love it for that, but sometimes I need it to be a little brighter to cut through a mix, the BBE Unit does the trick. When I use it with a bass, the Low contour helps beef up the low end without dominating the rest of the tone. Yes, when you "zero" all the parameters out on this unit, it is very neutral. OVERALL OPINION What I like most about this unit is how wonderfully clear and present it makes my guitar sound. What I don't like about it is that it has only a 1/4" input. I wish it has a Mic input too for when I am recording with a condenser on the guitar, just to hear what it would do. I got this unit used for $80 which was a great deal in my mind. I don't believe they make this model anymore, so used is the only way its going to happen. I give this unit a 10 out of 10 for sound quality. I got this a few months after I first started recording on my own with a Roland VS 1880. I used to just plug my Martin directly into the roland and the sound was always a little muddy. After I got this unit, I notices a HUGE difference in the clarity of my tone. I also have a ART MPA Gold tube preamp. Its nice to have the option of Tube and Transistor. They both serve there purpose well. Yes, I would definitely buy this unit again.

  • « Better than a few small Orange Amps I've Owned »

    GUP Tech’s PORCorn is a Rockerverb preamp. I’ve never played through a Rockerverb, but have had two smaller Orange amplifiers, and I will say that this pedal sounds as good as an orange amp, and even better (with more tone variations) than the two smaller orange amps I owned. Consequently, if you’re interested in an Orange, and have a clean channel available on your amp (either FX Loop or direct to the front), I would recommend the PORCorn for only $140 Canadian! For the demo, I ran the PORCorn through a solid-state Quilter Tone Block 202, both at 9v and 12v (it also runs on 18v, but I don’t have that power source). At 9v, this pedal sounds great, and very much like a quality distortion; but on 12v, it behaves more amp-like, has greater headroom and dynamics, but while maintaining that biting aggression. One key feature is the IN GAIN (referred to as Input Gain on the video), as this partially determines (with the GAIN) how intense PORCorn gets. With In Gain turned down half-way or less, and with Gain about quarter way, there is modest breakup, ideal for blues, light rock, etc. With In Gain turned all the way up, with Gain still quarter way, you’re into light to moderate crunch territory. With both Gains cranked, you’re now into Metal territory, with various degrees of crunchy Hard Rock between. Very diverse, as this pedal could literally act as a boost or overdrive, as much as a solo preamp platform. The three-band EQ is highly usable. There are no extremes with this EQ, in that turning the Bass all the way down or all the way up does not sound unreasonable to the ears. Same with the Midrange and Treble. You could dial in a number of tone combinations that will fit nicely in a mix and without being out of place. No flubby bass, honking midrange or shrill treble. My fixation tends to be on preamps, which are amazing when considering the cost and studio real estate of full-blown amps and heads. And being into hi-gain gear (although not a Metal player or composer exclusively, and a mediocre one at that), the PORCorn is one of my favorites, and for the price is certainly a top pick.

  • « Three Channels, Unique Voicings, and with a Thick and Robust Amp-Like Sound »

    One-hundred percent made in the USA, KSR’s VESTA preamp brings forward incredible amp tones that only require a cab or IR to sound fantastic. I’ll address the sound more, and later on (also check out the included demo), but let’s look at what the VESTA offers first. VESTA has three-channels: Clean, Crunch (Rhythm) and Lead. Once hooked up (basic in and out via the rear), there are three bypass modes – True Bypass, Buffered Bypass and Clean Bypass. If choosing Clean Bypass, then you get the clean preamp, which you switch to Rhythm or Lead by disengaging the Bypass footswitch (clicking on the Rhythm/Lead footswitch merely alternates which is active and ready AFTER releasing the Bypass). Both Clean Bypass and Buffered Bypass show an LED light, as do the Rhythm/Lead channels (no light for true bypass, which tells you it is active). Each has its own color, e.g., blue for rhythm and purple for lead, which provides a good visual aid when playing live. The Clean channel sounds very Fender-like and good on its own if you want a clean channel; however, it also makes for a great pedal platform if you wanted to run other preamps or pedals accordingly. This channel is bare bones, with a Volume and a Frequency Notch Filter (EQ), but it sounds solid and respectable. The Rhythm and Lead channels share a similar set of controls, although each channel is different – and I really like this feature. Often, two-channel preamps are nothing more than the same circuit, whereas you alter each channel to sound ‘somewhat’ different (quite often it’s nothing more than how much gain, boost or how you tweak the EQ that makes the difference). Conversely, VESTA’s Rhythm channel is tighter and more aggressive, to cut through the mix, whereas the Lead channel has more compression, fullness and singing quality – which still sounds good for rhythm work, but certainly lends itself to melodic and single-note playing. As indicated, each of those channels share the same controls, which I’ll address. There are the usual Volume (with a lot of headroom!) and Gain knobs. With Gain low, this rhythm is still pretty thick and meaty, although it can be tamed via a guitar’s volume knob. I find the sweet spot is between 10 and 1-o’clock, but even with the Gain cranked, and this is true of both channels, it still remains surprisingly defined and clear, unlike a lot of hi-gain pedals that sound over-saturated, muffed or muddy once the gain pushes past 1-o’clock. The EQ on both channels have an excellent, usable range. Even when pushing the EQ, the bass does not get muddy, the midrange does not honk, and the treble does not shrill. And then we get into the sculpting aspects, again, common with both channels. The first is the BRIGHT switch, either on or off, perfect for zeroing in on dark or bright amps, cabs or IRs. Next, is the FEEL, which governs how much bottom end vs. tightness you want. There are three settings: 1) switch down = most thump with bass/low-end presence; 2) switch up = more low-end punch; and 3) switch center = tightest. Finally, the MODE switch offers these possibilities: 1) Up = Classic British crunch 3-gain stage tone from the 70s/80s; 2) Down = Vintage high-gain common in the 90s; and 3) Center = a thicker 90s tone with more gain. Overall, there are a lot of tone variation among these two channels, whether you choose to use Rhythm for backing or lead, and the same with the Lead channel (in the event you prefer the sound qualities of that channel for rhythm). The nature of the preamp’s gain/distortion is relatively the same for both channels, but how they respond can be very different. Coupled with the EQ, there are a lot of possibilities, from sizzling scoops to big and massive sounding. In fact, I did not multi-track (the same notes) in my demo. I did include multiple tracks for guitar, but each track was a different recording. (I find it a bit devious when reviewers layer 2-3 tracks, and sometimes with a V-capo/octave blend, to suggest that is how a product sounds, and then when you get it, it sounds far thinner.) Sound-wise, VESTA is very impressive, with a very amp-like response and quality when doing nothing more than going direct to a cab or IR. It has a thick growl with a ‘brown sound’ quality, yet a bit more beastly and modern. Although the VESTA sounds ‘modern,’ it has a familiar voicing and reminiscent of late 90s Metal pushing beyond it 80s counterpart. And yet, there are enough knobs and switches that the VESTA can be tamed for more traditional Rock. Hookup is very basic, with an in/out via the rear, but also a remote access for separate foot control. It requires only 200mA, which means any basic power source will suffice. It can be used directly with a cab or IR (direct recording or PA), but it also can be used as a separate sound module for an amp’s clean channel. I think this is key, as many may like their Marshall, Randall or whatever amp they’re using, but may want a different flavor by driving the VESTA into an amp’s clean channel. This would provide another two distorted channels and without having to break the bank for a new amp. I don’t say this lightly, as many preamps are not quite as full-sounding as full-blown amps, but the VESTA holds its own, with a warm, growling response and detail. At $399 USD, the price is reasonable, competitive, and definitely in the ballpark for any serious player looking for quality sound options.

  • « Smoking hot versitale distortion »

    The Distortion station from AMT electronics is perhaps my favorite and most versitle transistor based distortions around. The unit can be powerd fron a nine volt battery or from an AC adapter.The unit has one quarter inch input and one quarter inch output. There are rotary knobs for controlling level, low, high, and gain. There are also three independent three way switches that select amp type, modification, and mic simulated placements. American, British, and Tweed are the three amp types available. The modifications available include Clean, High gain, and Hot wired. The three mic placements are Classic, Center, and Off-axis. These switches combined with the highly interactive tone controls create a tone tweakers dream come true. The pedal is fully analog so you are working with real sounds and not struggling to make fake sounds behave as real ones like with some digital models. UTILIZATION As with my other early AMT purchase there was no documentation provided in the box however the AMT site does contain great detail about their product line. A manual would have been nice with this pedal though because of all the variations available. As far as tone creation is conserned there are almost too many ways to shape the output. Take time and learn how each of the switches interact with each other and then how the basic four knobs vary those options. Rest easy though because in general it is easy to create totally awesome sounds. The pedal ranges for subtle to outrageous and everywhere in between. Do not let the lack of a mid control imply this pedal can not do metal. By using the switches properly and boosting the low and mid you can get an insane amount of metal distortion suitable for the heaviest or fastest riffage needed. SOUNDS I have had a pleasent experience using this pedal with my entire guitar collection ranging from Gilmour to Yngwie to some of my death machines. While I do own a vast collection of pedals this one covers the most ground by far. It can be fairly warm considering it is transistor based and scream with out being overly harsh, unless harsh is what you are shooting for. My favorite use for this pedal though is for Metal, all types and varieties. To me it is my go to distortion box for placing in front of an amps clean channel. No matter what you are going for though be assured that the pedal is clear and capable of loads of saturation without some unpleasant results I have heardin other pedals. Also unlike most Metal based pedals this can do hard rock to acid rock to blues to sqweak and sqwuak regae tones. OVERALL OPINION There is nothing about this pedal I do not like and the only thing I could find to improve on it would be a fourth switch to engage a tube, but I have tube based units and more things could ruin what I consider to be one of the most valuable pedals in my collection. Definitaly a desert island unit if you get my drift. This pedal may seem a touch higher in price than comparable units but its versitility more than justifies its cost. I ordered this pedal site unseen after hearing many sound clips, yes I know they can be deceiving at times but this time the chance paid off. At the time of purchace AMT units were very hard to obtain and I am forever thankful that I did not stop the pursuit of this pedal. I am always previewing pedals but this purchace raised the bar on what I accept as a good unit. I would definitaly do what I had to do to replace it if it were gone but it is well built and hopefully it will always be there for me.

  • « BBE Sound Inc. Acoustimax / Sonic Maximizer »

    World famous as, Kevin (The Ultra-Lounge Lizard) Mattson, I was a solo club act throughout the 70-80s golden era of live music. Every club, hotel, restaurant lounge wanted a live act back then. And there was a big niche for versatile soloists who could cover singer/songwriters like Croce, Taylor, Chapin, Fogelberg, Simon, etc. Now senescing in Duluth, I have a publishing company and a small recording studio where I continue to produce smash hit CDs. More seriously, I have been recording, producing both live and recorded music for more than 30 years. I was deeply impressed by BBE's "Sonic Maximizer" software recording plug-in. (I'll review that too in Recording_Gear.) I emailed BBE and asked if they had a product that would improve the sound of an acoustic pickup on my 12-string Larrivee. They suggested their Acoustimax preamp with Sonic Maximizer. It runs $200 at all the dot.com music dealers. The Acousimax is top quality, quiet preamp with 3-band EQ including a sweepable midrange knob. It would almost be worth the $200 for the preamp alone. But it also has BBE's Sonic Maximizer effect. This effect is remarkable because it seems not to add, but to remove the sense of "effect." The Sonic Maximizer technology compensates for the inherent distortions in audio caused by the physics of loudspeakers in particular and other transducers and electronics in general. The bottom line is that the audience hears a much more realistic, rich intrument. I'm sure this preamp would work equally well for any acoustic instrument with a pickup. The box has two stomp switches, one mutes the box, the other engages the Sonic Maximizer circuit. I must mention the versatile outputs on the back of the Acoustimax. In addition to the standard Line Out, there's an XLR output making it a high-class direct box. There's an FX loop TRS jack, and an always-active Tuner Out jack so you can tune even if the mute switch is engaged. The display is as simple as can be. LED's indicate the status of "Power," "Mute," "Sonic Maximizer," and "Clip." Only one thing: The cheap, generic power supply. The tiny guage wire from the wall-wart to the plug won't take much abuse. The Acoustimax requires an atypical 12-volt 300mA AC(not DC)output power adapter. It has no marking on it to associate it with the Acoustimax, so label it and don't try to replace it with a "DC" adapter. First, it's an all-metal tank. It truly is a stomp box you can stomp on. Next, it has lovely, smooth-turning metal knobs for each function — no foofoo cheap digital controls. Finally, it has solid foot switches. I you play an acoustic instrument with a pickup system of any kind — piezo,mic, or blend — the Acoustimax will serve as a great preamp and direct box. And BBE's Sonic Maximizer section will let your audience hear excellent depth and richness from your instrument. This review was originally published on http://www.musicgearreview.com

  • « Rocktron Chameleon Online »

    I bought it in Sweden, costed about 7.000 SKR from Musikborsen. The chameleon is easy to use and offers really good standard effects that requires some tweaking before they become really good. The distortion channels (2) are of high quality and a good range. As I said, the Chameleon requires alot of tweaking before you can get something useful out of the unit. When connecting an expression pedal, its a mystery to edit the presets to finally make it work, but when u know the box by hand, it's all smooth and easy to use. I miss the ability to tune my guitar through it though, so im loosing some signal when connecting an additional tuner. If the gain would go just a little beyond what it does i would be greatful, missing that little final touch in some sounds. Rocktron as a rack preamp is solid and one would have to litteraly drop it off the eifeltower to break it, quality knobs, steel all around the unit make it a quality product. It all comes down to that the Chameleon is really worth it's price. Nevermind the presets that are already there in the unit, learn the machine and it can really do wonders to your sound. This review was originally published on http://www.musicgearreview.com

  • « Nice Pre »

    Radial Engineering is one of those companies that has revolutionized the pedal world with their innovative and useful electronics. They have build some of the world's best foot pedals and controllers. This is an acoustic pre amp and direct box that helps bring the weak sounding pickups in an acoustic guitar up to a level that is cutting through the house pa system. * Piezo acoustic input signal boosters * Designed for studio and live performance * Unique Mix function * 1 -gauge construction * 3-year transferable warranty UTILIZATION * External 15VDC power supply * Input impedance regular: 6.8 kOhm * Input impedance piezo: 10 MOhm * PZB boost level: 10dB * Low cut roll-off pos-1: 75Hz * Low cut roll-off pos-2: 220Hz * Notch frequency range: 56Hz to 330Hz * Notch Q setting-1: 8dB * Notch Q setting-2: 15dB * Low frequency type and spec: Shelving type +/- 12dB @ 75Hz corner freq * Mid frequency range, type and spec: Parametric +/- 12dB 82Hz to 5.6Khz * High frequency type and spec: Shelving type +/- 12dB @ 7.5Khz corner freq * Boost level: 12dB * Effects send & receive : -10dB, Send 1 kOhm, Return 15 kOhm * Polarity Switch: 180 degrees (absolute phase reversal) * Input-1: 1/4" unbalanced * Input-2: 1/4" unbalanced * Insert send & receive: Send 1 kOhm, Return 15 kOhm * Output instrument: Hi-Z, coaxial, 1 kOhm * Output Tuner: Hi-Z, coaxial 6.8 kOhm * Pre-EQ: XLR male balanced mic level 600 ohms * Post-EQ: XLR male balanced mic level 600 ohms * Dimensions: 8" x 4-1/4" x 1-3/8" (203x108x35mm) SOUNDS This thing is a wealth of power in a small little direct box. It has unique mix function that allows you to insert to instruments and mix the both together or even using two different pickups on a single guitar that feature is an option as well. This ting is the brain or multiple functions of getting your sound of a great acoustic to the audience with precision and consistence. It also has the option o boosting your signal as well. Top that off with a built in effects loop for running delays and choruses and such into your acoustic signal. This is great for someone who may be using an acoustic in a small coffee shop and needs to fill the air with multiple leads and throw them in a loop and playing over the effected riff or signal. It is nice for using layers of guitars signals or even using your main signal and adding effects on top of that. OVERALL OPINION At new these units come in right at around $299, which is a fantastic price for a great sounding and resourceful preamp and direct box. I would recommend this to any club or church that needs hook up acoustic guitars on an ongoing basis and needs a very useful and versatile direct box preamp.

Categories that may interest you