View other reviews for this product:
Gabiche
Published on 08/04/07 at 06:46
You are more of a beginner to start the sound, with low budjet, you tell yourself that the speaker first prize will be sufficient.
You will find these speakers, billed by 180 per piece, you ca parrait suitable.
However, these speakers merritent simply not exist.
Why?
These speakers are equipped with speakers of what is lower-end. Ie the piezo. The piezo by itself (when it is in good manufacturing process), can give her a proper. But in this case, they give her an execrable because of their poor manufacturing ("imitation" Motorola).
That's not all. The boomer himself, made from very fine steel, and coils and often under-dimensioned suspension will give a sound, if we can talk about her, bad. Generally, the first component has slammed into a chamber of low-end sound.
All chmilblick will give her a very bad, which saturates at low power:
- Acute rough and aggressive
- Medium trumpet, no soul
- The low round with no
The worst thing they dare sell ca 180.
Besides the features are simply false, or at least, as they may be correct, but no indications in the conditions utiliss are saying.
It must be regarded as a forum for 600 watts rms and 1200 watts Programs, with a yield of 115 decibels and a bandwidth of 20 to 40,000 Hz "tration."
Concretely, this forum should be used up to 300 watts (RMS watts are forgotten pipo Programs 100%), with a yield of 95 db 1W/1m and a bandwidth of 80 to 18,000 Hz with a 03 db atenuations.
The question you're asking now, beginner, is that taking such a price.
There are a multitude of affordable solutions, forgetting the 2x38 cm unfortunately, but fortunately the quality of winning:
- The very best speakers of our Parisian B. Cord
- The EVP-X series of Warfedhale
- The series of Peavey Pro
- The RS series of Samson
- The PA series, TA ... The Box (http://www.thomann.de)
- The solution of the DIY (ask on the forum, there are people to help you)
Do not hesitate, if you are in doubt, ask us to come on the forum.
Even if some people are fed up with aggressive answer the same question, it is preferable to have a good gear that poor quality stuff.
Do not rely on advice from these forums very ameliorative, even if some people give their views in relation to the report / qualitprix.
Besides, it parra, I am "not really sound engineer." It is not wrong, but I listened to various speakers from all the cot (Meyer Sound, L-Acoustic, Nexo, Warfedhale TEUs, PRO Peavey, Yamaha, Dynacord, Samson, Turbosound, JBL ...), and I can say that we see much difference with the enclosure between a range of high-end (logic) the quality of sound with these Truks bizaroide emerging a kind of audible sound.
This notice applies to all speakers very low end of piezo-based (kool sound, Boost ...).
You will find these speakers, billed by 180 per piece, you ca parrait suitable.
However, these speakers merritent simply not exist.
Why?
These speakers are equipped with speakers of what is lower-end. Ie the piezo. The piezo by itself (when it is in good manufacturing process), can give her a proper. But in this case, they give her an execrable because of their poor manufacturing ("imitation" Motorola).
That's not all. The boomer himself, made from very fine steel, and coils and often under-dimensioned suspension will give a sound, if we can talk about her, bad. Generally, the first component has slammed into a chamber of low-end sound.
All chmilblick will give her a very bad, which saturates at low power:
- Acute rough and aggressive
- Medium trumpet, no soul
- The low round with no
The worst thing they dare sell ca 180.
Besides the features are simply false, or at least, as they may be correct, but no indications in the conditions utiliss are saying.
It must be regarded as a forum for 600 watts rms and 1200 watts Programs, with a yield of 115 decibels and a bandwidth of 20 to 40,000 Hz "tration."
Concretely, this forum should be used up to 300 watts (RMS watts are forgotten pipo Programs 100%), with a yield of 95 db 1W/1m and a bandwidth of 80 to 18,000 Hz with a 03 db atenuations.
The question you're asking now, beginner, is that taking such a price.
There are a multitude of affordable solutions, forgetting the 2x38 cm unfortunately, but fortunately the quality of winning:
- The very best speakers of our Parisian B. Cord
- The EVP-X series of Warfedhale
- The series of Peavey Pro
- The RS series of Samson
- The PA series, TA ... The Box (http://www.thomann.de)
- The solution of the DIY (ask on the forum, there are people to help you)
Do not hesitate, if you are in doubt, ask us to come on the forum.
Even if some people are fed up with aggressive answer the same question, it is preferable to have a good gear that poor quality stuff.
Do not rely on advice from these forums very ameliorative, even if some people give their views in relation to the report / qualitprix.
Besides, it parra, I am "not really sound engineer." It is not wrong, but I listened to various speakers from all the cot (Meyer Sound, L-Acoustic, Nexo, Warfedhale TEUs, PRO Peavey, Yamaha, Dynacord, Samson, Turbosound, JBL ...), and I can say that we see much difference with the enclosure between a range of high-end (logic) the quality of sound with these Truks bizaroide emerging a kind of audible sound.
This notice applies to all speakers very low end of piezo-based (kool sound, Boost ...).