View other reviews for this product:
Muh Nods « An instrument that does not leave indifferent »
Published on 12/06/13 at 14:58The Eowave Ribbon is a ribbon controller to CV / Gate and midi / usb, which also has an integrated digital monophonic synthesizer "lofi" 8 bits, which is controlled via the tape and pad.
Level connections, there is a mini-USB and mini-jack output stereo jack.
The usb is for MIDI control (data) for communication with the software publisher, and food. If you do not have a computer at hand, we can also supply the Ribbon via an adapter with transformer on one side and usb on the other, we find for cheap everywhere (supermarkets, etc.).
The mini-jack meanwhile is used as an audio output if the onboard synth is used, or when CV / gate way (you can not do both simultaneously, the choice is made via the editor. Synth In Fashion you can still use the midi out simultaneously).
To control a CV / gate device, use a Y cable stereo mini jack on one side and two mono jacks on the other. The latter two will send the position data of the tape (5 Volts), and either pressure (tape or pad), or Gate. Must make a choice, it's a shame, unlike Doepfer ribbon (the A-198/R2M) which allows you to send 3 voltages (CV 2 and 1 gate).
UTILIZATION
The publisher is to download from the site Eowave is an app for MAX, both are free. No installation problem for me.
This editor allows you to configure the particular Ribbon, noon, the waveform synth action pad, the CC messages sent, etc.. 16 papers are arranged, the first always being that the Ribbon, which is saved to extinction (eg home, I always leaves synth lofi way).
SOUNDS
The game tape takes practice. You really have to work fingering her, the tactile sensation is a bit strange at first, there is a little resistance when doing glissandi, we must bow his finger and put the good part of the pulp on the tape, and anticipate these movements. It should also be exercised to be able to maintain a constant pressure during these glissandi and crescendo and decrescendo manage.
The vibrato is a very natural way. The game quickly became very expressive, thanks to the pressure.
Phrasing may seem difficult to play because of the impression of "resistance" that I mentioned above, and must really work.
In any case it is necessary to develop a technique game, a bit like any instrumentalist. The string instrument players may have more ease than I am keyboardist.
Note that to use the full dynamic pressure, better use in HP: indeed, the onboard synth does not have much dynamic since it is 8 bits, and it feels good in the low values of pressure as the sound starts with a jerk. It is much more progressive and precise CV so.
The onboard synth however convenient for instant play, without connecting anything else, and because of an autonomous instrument Ribbon. The sound is roots and possibilities for very small "synthesis": there is only a single oscillator with 4 waveforms (sine, triangle, sawtooth or square).
The sound is really lofi, with lots of aliasing in rich as the square wave or saw-tooth. Frequency modulation (FM), whose intensity is controlled through the pad, adds a layer.
On the other hand sinus, FM allows to further increase the expressiveness of the instrument with a very singing tone at times in severe is approached almost a bowed string instrument.
The tape position modulates the pitch of 4 octaves, and the pressure (or pad) modulates the volume. The pad, if it is not used to control the volume, also possible to apply the FM.
The pad is curious. I do not know how it works, it seems to measure the applied pressure (or maybe a kind of tactile resistance) but it is very subtle, sometimes a light touch is sufficient to achieve a great value. Very expressive, especially when playing with the tape laid flat ahead.
Game effects how Theremin / Ondes Martenot are easy to reproduce, even if it remains in a much less air register.
CV controller, despite the limitation to two orders sent tensions, the possibilities are really interesting. I use it with a Doepfer Dark Energy and MFB NANOZWERG and two passive modules, multiple and an attenuator.
This allows me for example to precisely control the volume through the filter + pressure and height and other stuff via the position of the tape. I never use the gate, no utility yet.
MIDI things are very interesting also. Here, no limitations: the Ribbon sends the position (note messages + pitch bend), the pressure and the pad. The latter two are assignable to any control change message (CC).
The game is super-interesting with ethnic sounds such as configuring the ranks of the pitch bend on large values (+ / - two octaves), while using the pad to control the resonance of a filter, for example, it opens great perspectives and allows to re-discover its machines and virtual instruments.
OVERALL OPINION
The Eowave Ribbon is a particular instrument. It was time that I was eyeing the side of this type of controller, I also bought my first analog synthesizer, Doepfer Dark Energy, solely for that purpose, to give me a trip way Ondes Martenot poor (although in the end it does not really close Martenot waves, or even a Theremin).
I hesitated with the Doepfer ribbon controller, but the lower prices Eowave, synth and integrated side all-in-one-nothing-to-connect (handy for the live) tipped the balance for the Ribbon.
It is certain that it is an instrument to address a certain way, which requires practice, and we will not use it daily or exclusively.
And having tested once in concert, it really brings something extra, both musically and visually (I play holding it like a violin, and the tape is illuminated in blue). And stirs the curiosity of the public good too
Level connections, there is a mini-USB and mini-jack output stereo jack.
The usb is for MIDI control (data) for communication with the software publisher, and food. If you do not have a computer at hand, we can also supply the Ribbon via an adapter with transformer on one side and usb on the other, we find for cheap everywhere (supermarkets, etc.).
The mini-jack meanwhile is used as an audio output if the onboard synth is used, or when CV / gate way (you can not do both simultaneously, the choice is made via the editor. Synth In Fashion you can still use the midi out simultaneously).
To control a CV / gate device, use a Y cable stereo mini jack on one side and two mono jacks on the other. The latter two will send the position data of the tape (5 Volts), and either pressure (tape or pad), or Gate. Must make a choice, it's a shame, unlike Doepfer ribbon (the A-198/R2M) which allows you to send 3 voltages (CV 2 and 1 gate).
UTILIZATION
The publisher is to download from the site Eowave is an app for MAX, both are free. No installation problem for me.
This editor allows you to configure the particular Ribbon, noon, the waveform synth action pad, the CC messages sent, etc.. 16 papers are arranged, the first always being that the Ribbon, which is saved to extinction (eg home, I always leaves synth lofi way).
SOUNDS
The game tape takes practice. You really have to work fingering her, the tactile sensation is a bit strange at first, there is a little resistance when doing glissandi, we must bow his finger and put the good part of the pulp on the tape, and anticipate these movements. It should also be exercised to be able to maintain a constant pressure during these glissandi and crescendo and decrescendo manage.
The vibrato is a very natural way. The game quickly became very expressive, thanks to the pressure.
Phrasing may seem difficult to play because of the impression of "resistance" that I mentioned above, and must really work.
In any case it is necessary to develop a technique game, a bit like any instrumentalist. The string instrument players may have more ease than I am keyboardist.
Note that to use the full dynamic pressure, better use in HP: indeed, the onboard synth does not have much dynamic since it is 8 bits, and it feels good in the low values of pressure as the sound starts with a jerk. It is much more progressive and precise CV so.
The onboard synth however convenient for instant play, without connecting anything else, and because of an autonomous instrument Ribbon. The sound is roots and possibilities for very small "synthesis": there is only a single oscillator with 4 waveforms (sine, triangle, sawtooth or square).
The sound is really lofi, with lots of aliasing in rich as the square wave or saw-tooth. Frequency modulation (FM), whose intensity is controlled through the pad, adds a layer.
On the other hand sinus, FM allows to further increase the expressiveness of the instrument with a very singing tone at times in severe is approached almost a bowed string instrument.
The tape position modulates the pitch of 4 octaves, and the pressure (or pad) modulates the volume. The pad, if it is not used to control the volume, also possible to apply the FM.
The pad is curious. I do not know how it works, it seems to measure the applied pressure (or maybe a kind of tactile resistance) but it is very subtle, sometimes a light touch is sufficient to achieve a great value. Very expressive, especially when playing with the tape laid flat ahead.
Game effects how Theremin / Ondes Martenot are easy to reproduce, even if it remains in a much less air register.
CV controller, despite the limitation to two orders sent tensions, the possibilities are really interesting. I use it with a Doepfer Dark Energy and MFB NANOZWERG and two passive modules, multiple and an attenuator.
This allows me for example to precisely control the volume through the filter + pressure and height and other stuff via the position of the tape. I never use the gate, no utility yet.
MIDI things are very interesting also. Here, no limitations: the Ribbon sends the position (note messages + pitch bend), the pressure and the pad. The latter two are assignable to any control change message (CC).
The game is super-interesting with ethnic sounds such as configuring the ranks of the pitch bend on large values (+ / - two octaves), while using the pad to control the resonance of a filter, for example, it opens great perspectives and allows to re-discover its machines and virtual instruments.
OVERALL OPINION
The Eowave Ribbon is a particular instrument. It was time that I was eyeing the side of this type of controller, I also bought my first analog synthesizer, Doepfer Dark Energy, solely for that purpose, to give me a trip way Ondes Martenot poor (although in the end it does not really close Martenot waves, or even a Theremin).
I hesitated with the Doepfer ribbon controller, but the lower prices Eowave, synth and integrated side all-in-one-nothing-to-connect (handy for the live) tipped the balance for the Ribbon.
It is certain that it is an instrument to address a certain way, which requires practice, and we will not use it daily or exclusively.
And having tested once in concert, it really brings something extra, both musically and visually (I play holding it like a violin, and the tape is illuminated in blue). And stirs the curiosity of the public good too