View other reviews for this product:
Published on 02/18/08 at 02:51
I use it only for the order to sync my sequencer (live 6) in tempo with my turntables.
As such it is a useful tool.
the sync is not perfect, it is necessary to edit in tps tps with the buttons "pull" "push" to reset.
but dcalage trs is low, making it largely the tps to see happen and then work on something else without a pose worries.
the use, beginners, it's a bit Drout: The only info that lets you know what happens in the device is a tri-LED (red / green / blue).
is a function of the color of her fawn to flash (fast / slow or alternating colors).
on this point is not "terrible", but it did.
it offers very precise sync modes (3 modes) that can determine itself even, we can also determine the left by it even.
if there is a rapid change in bpm, even when she takes her time to recall, can be remedied by the button "tap" to give an approximation, it ferat the rest, faudrat by banging against one " pause / play "at the sequencer to superimpose the re-kick (but good, it does not gnral 140 as a 170 bpm).
you can disengage the BPM engine in case a "moment" of skeud could make mad such as a snare-drum.
it can be used without its battery power supply thanks integr.
the device is not in sync and sampler at the same tps, choose either one or the other with a small knob located on the cot.
at the sampler, it offers four samples with different times on each button: 4T/8T/16T/32T (invariable).
it allows to superimpose all the samples, and play with as desired.
the buttons are:
Registration:
- Dpart to registration of the sample, and that ds is finite, it is automatically read without dcalage.
read:
- Starting and stopping of the sample, if tamping, it takes the sample of the beginning.
the samples remain in memory as long as the rest of the energy in the stack.
can be re-sampler
It also offers a filter like this: "notch" with a "Q" fairly sharp, but it is not forcment terrible.
we can also re-sample the effect.
connectors (supplied):
on the device:
Taken two mini USB type (women) are to the south (in / out)
2 sockets (women) type jack 3.30 for audio (in / out)
A decision (emf) to the power supply.
cables:
2 cords noon, mini usb / Din 5 pin
An audio cord (in) stereo jack 3.30 / 6.35 jack
An audio cable (out) 3.30 stereo jack / RCA / RCA (x2)
1 transformer
dimensions: the same as your TV tlcommande
metal box (aluminum)
comes with sticker pads for installation without scratching the dining room table and to avoid it ripe when you press the buttons.
plug adapter (you never know if you ... your in Australia)
you even put stickers in your mix (they are nice dailleurs)
on the other hand, the doc is in English only (go decription technical words ...... galre!)
I would do if this choice?
to sync, so no problem, it has to dailleurs that I bought (dailleurs, thank you Vinche999 for info).
if t had a sampler for the part, not something I would take (the SB Pro for example).
I bought 110 including postage in Hard to Find Records (fr) https://www.htfr.com/
UTILIZATION
.
SOUNDS
.
OVERALL OPINION
.
As such it is a useful tool.
the sync is not perfect, it is necessary to edit in tps tps with the buttons "pull" "push" to reset.
but dcalage trs is low, making it largely the tps to see happen and then work on something else without a pose worries.
the use, beginners, it's a bit Drout: The only info that lets you know what happens in the device is a tri-LED (red / green / blue).
is a function of the color of her fawn to flash (fast / slow or alternating colors).
on this point is not "terrible", but it did.
it offers very precise sync modes (3 modes) that can determine itself even, we can also determine the left by it even.
if there is a rapid change in bpm, even when she takes her time to recall, can be remedied by the button "tap" to give an approximation, it ferat the rest, faudrat by banging against one " pause / play "at the sequencer to superimpose the re-kick (but good, it does not gnral 140 as a 170 bpm).
you can disengage the BPM engine in case a "moment" of skeud could make mad such as a snare-drum.
it can be used without its battery power supply thanks integr.
the device is not in sync and sampler at the same tps, choose either one or the other with a small knob located on the cot.
at the sampler, it offers four samples with different times on each button: 4T/8T/16T/32T (invariable).
it allows to superimpose all the samples, and play with as desired.
the buttons are:
Registration:
- Dpart to registration of the sample, and that ds is finite, it is automatically read without dcalage.
read:
- Starting and stopping of the sample, if tamping, it takes the sample of the beginning.
the samples remain in memory as long as the rest of the energy in the stack.
can be re-sampler
It also offers a filter like this: "notch" with a "Q" fairly sharp, but it is not forcment terrible.
we can also re-sample the effect.
connectors (supplied):
on the device:
Taken two mini USB type (women) are to the south (in / out)
2 sockets (women) type jack 3.30 for audio (in / out)
A decision (emf) to the power supply.
cables:
2 cords noon, mini usb / Din 5 pin
An audio cord (in) stereo jack 3.30 / 6.35 jack
An audio cable (out) 3.30 stereo jack / RCA / RCA (x2)
1 transformer
dimensions: the same as your TV tlcommande
metal box (aluminum)
comes with sticker pads for installation without scratching the dining room table and to avoid it ripe when you press the buttons.
plug adapter (you never know if you ... your in Australia)
you even put stickers in your mix (they are nice dailleurs)
on the other hand, the doc is in English only (go decription technical words ...... galre!)
I would do if this choice?
to sync, so no problem, it has to dailleurs that I bought (dailleurs, thank you Vinche999 for info).
if t had a sampler for the part, not something I would take (the SB Pro for example).
I bought 110 including postage in Hard to Find Records (fr) https://www.htfr.com/
UTILIZATION
.
SOUNDS
.
OVERALL OPINION
.