All user reviews for the Palmer PWT05

Linear power supply for effects pedals German mark. The country of manufacture is strangely not mentioned.
Its resemblance to Harley Benton PowerPlant Junior and T-Rex Fuel Tank Junior (Made in China) is rather disturbing both in electrical characteristics that cords supplied or part of screen printing. But back to Palmer.
Metal housing with 4 feet of foam.
Rear panel:
- 1 stand C14 IEC connector for AC power.
- 1 switch for power on / off.
- 1 voltage selector switch for a power supply 230 V 50 Hz supply to a 115 V 60 Hz (North and Central America).
Front:
- 5 output connectors insulated 2.1 x 5.5 in 9 VDC 120 mA negative center.
- 1 yellow LED Power.
Accessories:
- 5 strands of 30 cm, 5 strands of 60 cm, 1 garland of 1.15 m to 5 outputs, 1 yellow cord Y 50 cm to double the current (240 mA) and 1 power cable (EEC 7/7 -> IEC C13) of 1.65 m.
- 1 instruction manual in 4 languages ​​including French (see "Other Files" in the "Media" tab).
Dimensions: 105 x 105 x 40 mm, weight: 0.96 kg
Palmer warranty: 5 years.
The circuit is simple, clean and easy to repair (see photo in the "Media" tab): 1 switch -> 1 fuse 5.2 x 20 mm 500 mA -> 1 transformer 230 V/12 V 5 outputs -> 5 diode bridges -> 5 smoothing capacitors -> 5 9 V voltage regulators with associated capacitors.
CAUTION: The yellow Y cable is wired in parallel, so it can double the intensity, a pedal for a little greedy, but in any case the voltage as can be read from here and there: NO POWER 18 V POSSIBLE WITH THIS CORD (see photo of the measure or record in the "Media" tab).
This supply fully meets my needs: isolated outputs for quiet operation (no buzz), integrated transformer housing (this is more convenient), detachable power cable (it's also practical), switch-up on / off (as it is more convenient) and can supply 115 V 60 Hz for the day when I will go on a world tour HAHAHAHAHA!
The quality / price is right knowing that the power of the same class do not offer all isolated outputs, not all switch and detachable power cable, or even sometimes have a switching power supply (such mobile phone charger) on the power cable, which is still strange for power.
I remake this choice without hesitation.

Supply which delivers a voltage only 9V (damage, with 12 or 18V), 5 outputs capable of delivering 120mA each intensity. She is apparently well built.
The package contains 5 long and 5 short cables, daisy chain a pretty good result, and a yellow Y cable that allows you to use 2 outputs to double the intensity they issue. Enough to feed a very greedy as a Strymon pedal or a Line6 DL-4 (for example) but it is perfect for my DD-20, which consumes 200mA.
Note the presence of a switch, and the fact that the power cable is mounted on shuko, making it removable.
Alim silent, compact, more expensive than the dealer (Thomann & Co) but face up to its brand competing brands.