Voodoo Lab Pedal Power 2
Voodoo Lab Pedal Power 2

Pedal Power 2, AC Adapters for Pedal from Voodoo Lab in the Pedal Power series.

Lonewolf 04/08/2005

Voodoo Lab Pedal Power 2 : Lonewolf's user review


  • Like
  • Tweet
  • Partager
  • Submit
  • Email
Value For Money : Poor
It's been a good week now that my effects are powered by the magic boiboite (sooo tell the j'te!), Simply gnial verdict, no more noise, hiss and other dsagrables Buzzz of all kinds

Previously I used the small clbres Switchmode adapters, which are devilishly effective if they make more than three hands when their effects are affected (not on my pedals 7 Pedalboard it must be 9v power in, and I finally found myself with a nasty hiss which became unbearable when j'enclenchais the gain of my amp, now it's over it all

My 7 9v effects are all connected the same power supply. and none stumbles, over two hours APRS branch Voodoo barely heated

In terms of the spcificits bte, there are 8 cards in faade format Barrel (like Boss pedals what), two (7 and 8) are teams of small knob to simulate battery use (try with a good old analog overdrive or fuzz it's fun), the back was a female plug type IEC (such as the power supply. your PC) to connect the power supply. sector and deuxime mle to connect another power supply., a pdalier noon ... And finally below 8 small switches that can switch the output voltage of 12.3v.
Cables are supplied with 6 barrel (for Boss effects with plug type), a reverse (red for Line 6 among others), a 3.5 jack (for EHX, ProCo, ...) and a battery clip ( 9 V battery for the effects of an unfilled sheet alim.) In short, they could provide a little more how it is the one that has 3 or 4 or 8 EHX Boss?

Compared competition ... What competition? the Furmann is overpriced and Dunlop gadget is a cot in short, not 10 because of missing Cables, but a good many MRIT 9 for 200 Euros Necessary for qq and adopt the machine