Low Power Output on Camco DL 3000 2P

0 comment
1 participant
5,020 views
1 follower

poettle

New AFfiliate

Member 17 years ago

Topic Posted on 04/30/2008 at 03:00:56

Hi

I have a Camco DL3000 2P which is producing very low power output. As a test, I connected a QSC PL 1.4 (350W per channel) and my Camco DL3000 2P (1100w per channel) each to a Dynacord F12 CWH mid-hi cabinet (8 ohm), with the same input signal. On full power on the amps, the speaker powered by the QSC PL 1.4 is about 18 dB/3 times (rough guess) louder than the speaker powered by the Camco DL3000 2P.

My conclusion - the output of the QSC PL 1.4 is normal and the output of the Camco DL3000 2P is way way lower than it should be.

Any suggestions as to the source of the problem would be appreciated. Many thanks
Peter

< Thread list
Rules

List of moderators