View other reviews for this product:
strobo
Published on 01/02/06 at 05:35
My config is AMD2400 +, A7N8X-X, 1Gb RAM.
I possdais a DSP24 Value. I had problem with the ds The beginning S / PDIF which had forced me to do it yourself (soldering). Despite everything, made the interfaage with my DAT difficult and unreliable.
And STAudio no longer exists, the drivers are no longer updated. Obliged to old drivers to work correctly ...
I would have d ds The beginning and I buy the Audiophile advantage of its low price trs for me to buy it.
I use it with Tracktion 2, and it works nickel.
UTILIZATION
Installation is really simple trs. A priori, it is Tlcharger the driver, install it and then install the card into the PC. I read somewhere, but should work well in the other direction!
No incompatibility. Is installed, it works, but no sound!
You must read the document to understand the concept of signal routing, and click on APRS o it is necessary and it works.
The doc is good, even if for once, it is somewhat deprecated. Better Tlcharger novuelle the site, and in French.
GETTING STARTED
With the latest WDM driver and certified Protools M-Powered, a walk nickel.
It is a card trsrpandues and support to match. Drivers often put day, and important knowledge bases.
I use Tracktion 2 with the minimum latency allowed by the card 48khz. In 96khz, increase latency, otherwise a "cripse!"
I was able to play songs with 20 tracks. It sounds and feels loose.
OVERALL OPINION
In fact, over the DSP24 Value, I noticed two things:
- The sound is clearer and stro fuller, prcise. It is empty on certain investments on my own pieces. Surprising, but the Audiophile CHARACTERISTICS are all the same, on paper, although the suprieure DSP24 Value, yet similar in design.
- The record is clear suprieur ... With the DSP24 Value, I had a little breath. The nothing is clean.
Honntement, I bought especially for the S / PDIF, but I was not expecting a better out at the sound!
My only complaint comes from the MIDI. It does not gre THROUGH Fawn "native". The DSP24 Value replied the MIDI signal on THRU ds light the PC. I could drive my expander directly from my synth.
Now must I use a soft dedi (MIDI Control Center, freeware) to route the signal or open my squenceur.
If anyone has another solution.
I possdais a DSP24 Value. I had problem with the ds The beginning S / PDIF which had forced me to do it yourself (soldering). Despite everything, made the interfaage with my DAT difficult and unreliable.
And STAudio no longer exists, the drivers are no longer updated. Obliged to old drivers to work correctly ...
I would have d ds The beginning and I buy the Audiophile advantage of its low price trs for me to buy it.
I use it with Tracktion 2, and it works nickel.
UTILIZATION
Installation is really simple trs. A priori, it is Tlcharger the driver, install it and then install the card into the PC. I read somewhere, but should work well in the other direction!
No incompatibility. Is installed, it works, but no sound!
You must read the document to understand the concept of signal routing, and click on APRS o it is necessary and it works.
The doc is good, even if for once, it is somewhat deprecated. Better Tlcharger novuelle the site, and in French.
GETTING STARTED
With the latest WDM driver and certified Protools M-Powered, a walk nickel.
It is a card trsrpandues and support to match. Drivers often put day, and important knowledge bases.
I use Tracktion 2 with the minimum latency allowed by the card 48khz. In 96khz, increase latency, otherwise a "cripse!"
I was able to play songs with 20 tracks. It sounds and feels loose.
OVERALL OPINION
In fact, over the DSP24 Value, I noticed two things:
- The sound is clearer and stro fuller, prcise. It is empty on certain investments on my own pieces. Surprising, but the Audiophile CHARACTERISTICS are all the same, on paper, although the suprieure DSP24 Value, yet similar in design.
- The record is clear suprieur ... With the DSP24 Value, I had a little breath. The nothing is clean.
Honntement, I bought especially for the S / PDIF, but I was not expecting a better out at the sound!
My only complaint comes from the MIDI. It does not gre THROUGH Fawn "native". The DSP24 Value replied the MIDI signal on THRU ds light the PC. I could drive my expander directly from my synth.
Now must I use a soft dedi (MIDI Control Center, freeware) to route the signal or open my squenceur.
If anyone has another solution.