MicMicMan
Published on 07/13/07 at 08:46
Transistor Combo 15 Watts, to numerical modeling:
<ul>
A channel power amp
A channel by numerical modeling: Fender 16 amp models (Acoustic, Jazz, Tweed, Blackface, British, Hot Rod, Metalhead)
A 3-band EQ
Effects processor (Reverb, Delay, Chorus, Flange, Tremolo, and Combinations)
Headphone output
Auxiliary input
Baffle 8 "
</ul>
A good little amp working, lightweight, easy to carry, what, nothing more. This is requested.
Built solidly, even if the party amplification (with knobs) seems to not be screwed. A supervise.
Among the criticisms on the technical characteristics:
<ul>
No effects loop
The effects are totally adjustable: for those who thought this amp specifically to take effect, go your way
</ul>
UTILIZATION
The unit is lightweight, easy to carry.
The selector is not well thought of modeling. It is a knob, the position will determine the model used. He has no detents, no specifics Selection must be determined by ear when moving from one model "British" to another, or a model "Blackface" to the other: it is not obvious. The choice to model the effect has the same defect.
The eq is sensitive in the right direction, the adjustment is good, even with the volume settings and gain.
There is no footswitch for channel selection, along with what would be?
A rather embarrassing failure: <span style="text-decoration: underline;">the different models are not balanced in terms of volume.</span> That is, when switching from one model to another, for the same gain setting and volume, the overall volume will drastically change. Well, saw the power of the beast, it is not particularly serious, but it's still very annoying.
The absence of effects loop can not work effectively with a Loopstation or without accompanying multi-effects.
SOUNDS
On models, they are average. The settings are easy, the sound is correct.
The models are quite credible jazz, it's possible to get a sound very "smooth" on Wes Montgomery, even with a strat-type guitar, even if we meet the concerns of volume.
The clean sounds are correct even if too slammin (transistor requires).
Sounds typed or Blues Rock vintage models correspond to the Blackface.
The hot distos typed Marshall can be fairly well approximated by the British models, where the gain is very sensitive.
Hot Rod modeling can be reproduced easily typed RATM sound.
The only real downside, the modeling Metal extremely synthetic ...
Impossible to use modeling "acoustic" correctly, the sound is too bright and the treble all drown.
Both say the effects are relatively useless, except for the reverb, whose modeling is quite good: nothing is adjustable.
It comes to his side only fault of the amp: the channel "power amp". Incredible as it may seem, this channel saturates sometimes the slightest sharp, according to ... the mood of the amp. In these cases, only one solution: the passage channel modeling, its all that is becoming clear. But slightly rounded sound. Damage to the multi-effect that has connected upstream ...
Finally, the speaker spits out more than it looks. This combo is the resource for 15 watts, even if you arrive early to sound "canned," that does not breathe.
OVERALL OPINION
To summarize:
<span style="text-decoration: underline;">Most</span>
<ul>
The weight and bulk
Modeling the honest
More anecdotally, the reassuring aspect, the quality of reverbs and effectiveness of the EQ
</ul>
<span style="text-decoration: underline;">Cons</span>
<ul>
The channel "power" when he kidding (saturates immediately on the treble)
The absence of effects loop
Modeling the metal, synthetic
The knobs for selecting models
</ul>
The effects are not used much but it's always nice to have them.
As for the price, I think it is justified: € 170 for a portable amp work by tram, with its quite honnêtre, I think it is justified though.
Looking back (several years) in the register 15 watts instead I would choose a Peavey Vypyr, I've experienced and that convinced me of its models and its effects.
<ul>
A channel power amp
A channel by numerical modeling: Fender 16 amp models (Acoustic, Jazz, Tweed, Blackface, British, Hot Rod, Metalhead)
A 3-band EQ
Effects processor (Reverb, Delay, Chorus, Flange, Tremolo, and Combinations)
Headphone output
Auxiliary input
Baffle 8 "
</ul>
A good little amp working, lightweight, easy to carry, what, nothing more. This is requested.
Built solidly, even if the party amplification (with knobs) seems to not be screwed. A supervise.
Among the criticisms on the technical characteristics:
<ul>
No effects loop
The effects are totally adjustable: for those who thought this amp specifically to take effect, go your way
</ul>
UTILIZATION
The unit is lightweight, easy to carry.
The selector is not well thought of modeling. It is a knob, the position will determine the model used. He has no detents, no specifics Selection must be determined by ear when moving from one model "British" to another, or a model "Blackface" to the other: it is not obvious. The choice to model the effect has the same defect.
The eq is sensitive in the right direction, the adjustment is good, even with the volume settings and gain.
There is no footswitch for channel selection, along with what would be?
A rather embarrassing failure: <span style="text-decoration: underline;">the different models are not balanced in terms of volume.</span> That is, when switching from one model to another, for the same gain setting and volume, the overall volume will drastically change. Well, saw the power of the beast, it is not particularly serious, but it's still very annoying.
The absence of effects loop can not work effectively with a Loopstation or without accompanying multi-effects.
SOUNDS
On models, they are average. The settings are easy, the sound is correct.
The models are quite credible jazz, it's possible to get a sound very "smooth" on Wes Montgomery, even with a strat-type guitar, even if we meet the concerns of volume.
The clean sounds are correct even if too slammin (transistor requires).
Sounds typed or Blues Rock vintage models correspond to the Blackface.
The hot distos typed Marshall can be fairly well approximated by the British models, where the gain is very sensitive.
Hot Rod modeling can be reproduced easily typed RATM sound.
The only real downside, the modeling Metal extremely synthetic ...
Impossible to use modeling "acoustic" correctly, the sound is too bright and the treble all drown.
Both say the effects are relatively useless, except for the reverb, whose modeling is quite good: nothing is adjustable.
It comes to his side only fault of the amp: the channel "power amp". Incredible as it may seem, this channel saturates sometimes the slightest sharp, according to ... the mood of the amp. In these cases, only one solution: the passage channel modeling, its all that is becoming clear. But slightly rounded sound. Damage to the multi-effect that has connected upstream ...
Finally, the speaker spits out more than it looks. This combo is the resource for 15 watts, even if you arrive early to sound "canned," that does not breathe.
OVERALL OPINION
To summarize:
<span style="text-decoration: underline;">Most</span>
<ul>
The weight and bulk
Modeling the honest
More anecdotally, the reassuring aspect, the quality of reverbs and effectiveness of the EQ
</ul>
<span style="text-decoration: underline;">Cons</span>
<ul>
The channel "power" when he kidding (saturates immediately on the treble)
The absence of effects loop
Modeling the metal, synthetic
The knobs for selecting models
</ul>
The effects are not used much but it's always nice to have them.
As for the price, I think it is justified: € 170 for a portable amp work by tram, with its quite honnêtre, I think it is justified though.
Looking back (several years) in the register 15 watts instead I would choose a Peavey Vypyr, I've experienced and that convinced me of its models and its effects.