View other reviews for this product:
Published on 06/13/05 at 06:37
Value For Money :
Excellent
At the technical level, it has inputs / outputs:
<ul> 2 phono (cinch in gold plated)
5 line inputs (2 High, 3 Low in cinch)
Between a microphone (jack 5 1 / 4)
A master output with an XLR
A cinch to master output 2
An output record </ul>
Otherwise, there are:
<ul> a 3-way table (2 per fader and a rotary by)
A pro-fader VCA crossfader Ecler (I think it is the same for channels)
SETTING THE curve for the cross
Rglage common curve for two channel faders
3-band EQ with complete kill for two main tracks
2-band EQ for channel 3 (micro-or L-Line)
Given nitre PFL mono and Master Stro
balance between headset and PFL Mix
effects loop with send one for each main track and possibility to choose enter pre and post fader </ul>
Fairly standard, we may regret the lack of XLR mic and Jack at the same time. For cons, the good point is the management of the effects loop with external pre / post fader.
Basically, on paper, a two-way table as well scratch that adapts to the mix.
UTILIZATION
Level interface, it is clear trs, there's the buttons that light up when they are activated to kill and select the PFL. It quickly blunders.
Large EQ knobs are super enjoyable handle.
I love the touch of faders. With a good glide lgre Resistors. They feel good.
The select cross curve is exactly what you would expect: the mode switch was progressive mode. As for the fader curve is a little less empty, but you can find a curve his taste in any case, even if it is not the position of slecteur that one might think.
Crossfader level, the mode switch not even cut 1 / 2 mm 1 or 2 mm from the edge. Ca me change my 2.5 cm to mute the sound! Finally, I can scratch acclrer routines ...
And if not, the surprise is the VU meter. Super readable cohrente graduation (not half as red as Pioneer). The level takes the Stereo Master output level record, so it's not influenced by the Master level 1 or 2. Nickel is to correct the gain of the current disc in a snap when you have not had time to do the calibration.
SOUNDS
L t I bluff. Once plugged into my sound system, I finally heard the low super-rich.
I redcouvert sounds and rich sound of Młoda. Pure pleasure.
Otherwise, the channel EQ is good. You can really work on his his own way, has me changing my Behringer ...
I usually mix 0db level, with rare spikes 10 dB. So no the problem, the sound is nickel. I can even push my amp into a corner without saturation of the signal. I won efficiency. For story, for large bourrains who like everything is illuminated red will be served, was holding up. There's a big margin before saturate anything. Cal in all things red, his holds, and trs is not distorted. I understand a little better why Ecler SMAC Pro 30 silent teufeur a table (see how in a mix no matter how teuf, is the stuff that takes).
OVERALL OPINION
Bought in Germany dernire week, I finally m'clater with this in collection outdoor WE. A little mix of prs 7 hours and at other times a branch or a PC jukebox has not budged. Despite cuts juice and mosquitoes that are sailing on the table, no sound weird.
It's been over a year I was hanging on the forums Fran and foreigners (DJForums, DenonDJForums, UniversDJ and, of sr Audiofanzine). I intended to take effect in-house and four lanes, but what's to four lanes when it is not going to use 50% of the time? The same when nuo2 offers eight inputs, even if it is 3, max simultanne, has still sufficient. Otherwise, to the effect, test the APRS have nuo5 and Denon X-1500, I t's just the quality. Prfre I take a good multi-effects by 19 inches later. And it is that the Ecler nuo 2, 3 and 4 are the difference, management of externalities: their knob to send by the switch and pre / post fader. Perfect solution. For nuo2, one can get r-effects on channel 3: more than perfect!
So an excellent qualitprix for a table that can see far since we can add an external effect it flexibly. Plutt mix or scratch plutt? It's not a problem, will have to do in all circumstances and with quality.
We will use if my opinion changes ...
<ul> 2 phono (cinch in gold plated)
5 line inputs (2 High, 3 Low in cinch)
Between a microphone (jack 5 1 / 4)
A master output with an XLR
A cinch to master output 2
An output record </ul>
Otherwise, there are:
<ul> a 3-way table (2 per fader and a rotary by)
A pro-fader VCA crossfader Ecler (I think it is the same for channels)
SETTING THE curve for the cross
Rglage common curve for two channel faders
3-band EQ with complete kill for two main tracks
2-band EQ for channel 3 (micro-or L-Line)
Given nitre PFL mono and Master Stro
balance between headset and PFL Mix
effects loop with send one for each main track and possibility to choose enter pre and post fader </ul>
Fairly standard, we may regret the lack of XLR mic and Jack at the same time. For cons, the good point is the management of the effects loop with external pre / post fader.
Basically, on paper, a two-way table as well scratch that adapts to the mix.
UTILIZATION
Level interface, it is clear trs, there's the buttons that light up when they are activated to kill and select the PFL. It quickly blunders.
Large EQ knobs are super enjoyable handle.
I love the touch of faders. With a good glide lgre Resistors. They feel good.
The select cross curve is exactly what you would expect: the mode switch was progressive mode. As for the fader curve is a little less empty, but you can find a curve his taste in any case, even if it is not the position of slecteur that one might think.
Crossfader level, the mode switch not even cut 1 / 2 mm 1 or 2 mm from the edge. Ca me change my 2.5 cm to mute the sound! Finally, I can scratch acclrer routines ...
And if not, the surprise is the VU meter. Super readable cohrente graduation (not half as red as Pioneer). The level takes the Stereo Master output level record, so it's not influenced by the Master level 1 or 2. Nickel is to correct the gain of the current disc in a snap when you have not had time to do the calibration.
SOUNDS
L t I bluff. Once plugged into my sound system, I finally heard the low super-rich.
I redcouvert sounds and rich sound of Młoda. Pure pleasure.
Otherwise, the channel EQ is good. You can really work on his his own way, has me changing my Behringer ...
I usually mix 0db level, with rare spikes 10 dB. So no the problem, the sound is nickel. I can even push my amp into a corner without saturation of the signal. I won efficiency. For story, for large bourrains who like everything is illuminated red will be served, was holding up. There's a big margin before saturate anything. Cal in all things red, his holds, and trs is not distorted. I understand a little better why Ecler SMAC Pro 30 silent teufeur a table (see how in a mix no matter how teuf, is the stuff that takes).
OVERALL OPINION
Bought in Germany dernire week, I finally m'clater with this in collection outdoor WE. A little mix of prs 7 hours and at other times a branch or a PC jukebox has not budged. Despite cuts juice and mosquitoes that are sailing on the table, no sound weird.
It's been over a year I was hanging on the forums Fran and foreigners (DJForums, DenonDJForums, UniversDJ and, of sr Audiofanzine). I intended to take effect in-house and four lanes, but what's to four lanes when it is not going to use 50% of the time? The same when nuo2 offers eight inputs, even if it is 3, max simultanne, has still sufficient. Otherwise, to the effect, test the APRS have nuo5 and Denon X-1500, I t's just the quality. Prfre I take a good multi-effects by 19 inches later. And it is that the Ecler nuo 2, 3 and 4 are the difference, management of externalities: their knob to send by the switch and pre / post fader. Perfect solution. For nuo2, one can get r-effects on channel 3: more than perfect!
So an excellent qualitprix for a table that can see far since we can add an external effect it flexibly. Plutt mix or scratch plutt? It's not a problem, will have to do in all circumstances and with quality.
We will use if my opinion changes ...