Numrique distortion pedal with three selected types, effective equalizer (parametric medium) and noise-gate Intgr (very effective also)

UTILIZATION

No pb. Well almost, see below-after ...

SOUND QUALITY

Attention, I do not know if opinions differ so much because of this but your exact pedals that has changed radically change my amp.
Let me explain:
- Phase 1, transistor amp Roland Cube 30: no pb, I plug my guitar (peavey Wolfgang US) directly into the uber metal, then this one in the amp clean sound (which is also excellent). Your exact trs is good (playing hard I prfre classic mode "metal") a lot of sustain, only the bass is a little lgres. It is cold enough (forcing on the cube as well) but it is effective and workable trs.
- Phase 2 amp lamp ValveKing 112: making the same connections, rsultat catastrophic! Its super loud, no more bass, etc ... I tried to plug it into the effects loop of the amp, and your exact silent a little better, I rcuprer low, but much less gain and sustain before ... The saturated channel 112 is doing much better instantly. In short, the uber metal farewell for me!

OVERALL OPINION

I RPET all costs but we must try this pedals with your amp, if not hello surprises (and not always good as in my case ...).
I trs SATIF silent with my Roland Cube, for against, it unusable with the ValveKing silent.
I bought a Vox rcemment Satchurator, and no problem, plugs into the clean channel it gives me a good saturation trs prcise more "clear" that the channel saturated the amp.
In short, I do not know if this problem on other amp lamps, but be sure your type of amp before you buy!