View other reviews for this product:
devil « Very good product, yes, but ... »
Published on 02/23/11 at 02:39It is a question of a spring reverb latest generation rack 1 unit.
It is therefore entirely analog reverb, reverb or more precisely two combined, one short and one long.
Edition question we have three knobs on the front for each reverberation unit, a setting input, a setting of sound mixing dry / Envoy in reverb and an adjustable output level.
In addition to two buttons that allow to activate a high pass filter and phase reverse.
Level input / output: 2 inputs (reverb 1 and 2) Jack Balanced / XLR balanced
and 2 outputs on the same principle
UTILIZATION
The configuration is relatively simple despite a few explanatory manual, especially the use in "stereo". There must grope and test in order to understand something.
SOUND QUALITY
Let's talk about more interesting now ...
The sound is, in terms of quality, one of the best I have heard about this type of reverb. Y 'is not a fart breath, the springs begin to tolchoquer if they are really pushing to end, and the two settings can go a little further than other spring reverb that I have or that I have had in my possession. Note also that it handles all the sound frequencies in much the same way, which is often lacking in this type of stuff, treble disappear quite low compared to.
on the other hand in terms of pure sound, I found the sound better on my Boss RX-100, on the other hand breath much, much more, and loses a lot as soon as one starts in the treble.
So we are dealing here with a spring reverb last generation, suitable for studio pro, with a signal / noise at the top.
OVERALL OPINION
I have one month from now. J 'uses only spring reverb in my studio (analog requires ...) and if it is not my favorite (ie the boss RX-100 mentioned above) I must admit that it is much more " upscale "and versatile.
Its main drawback that is that it does not work in stereo mode, each output has its own reverb, with the possibility of "linker" these two outputs. So we are left with the reverb on an output 1 and a mix (with a loss of 3 / 4 decibels) of both the output 2.
Me I use a Y-cable and I highlighted the reverb on a mono channel on my console, so I 've almost no loss, and I have my two good reverbs.
Now his biggest flaw: the price!
$ 750 if I don 't abuse!
While the quality is there, no problem, that is solid, that is clean, OK.
But to claim the $ 750 ...
I think this price is over-rated.
Me I had any occasion, and price of the occasion (half price) that is good, no worries, but the price of the new is really exaggerated.
Finally it 's just my opinion.
It is therefore entirely analog reverb, reverb or more precisely two combined, one short and one long.
Edition question we have three knobs on the front for each reverberation unit, a setting input, a setting of sound mixing dry / Envoy in reverb and an adjustable output level.
In addition to two buttons that allow to activate a high pass filter and phase reverse.
Level input / output: 2 inputs (reverb 1 and 2) Jack Balanced / XLR balanced
and 2 outputs on the same principle
UTILIZATION
The configuration is relatively simple despite a few explanatory manual, especially the use in "stereo". There must grope and test in order to understand something.
SOUND QUALITY
Let's talk about more interesting now ...
The sound is, in terms of quality, one of the best I have heard about this type of reverb. Y 'is not a fart breath, the springs begin to tolchoquer if they are really pushing to end, and the two settings can go a little further than other spring reverb that I have or that I have had in my possession. Note also that it handles all the sound frequencies in much the same way, which is often lacking in this type of stuff, treble disappear quite low compared to.
on the other hand in terms of pure sound, I found the sound better on my Boss RX-100, on the other hand breath much, much more, and loses a lot as soon as one starts in the treble.
So we are dealing here with a spring reverb last generation, suitable for studio pro, with a signal / noise at the top.
OVERALL OPINION
I have one month from now. J 'uses only spring reverb in my studio (analog requires ...) and if it is not my favorite (ie the boss RX-100 mentioned above) I must admit that it is much more " upscale "and versatile.
Its main drawback that is that it does not work in stereo mode, each output has its own reverb, with the possibility of "linker" these two outputs. So we are left with the reverb on an output 1 and a mix (with a loss of 3 / 4 decibels) of both the output 2.
Me I use a Y-cable and I highlighted the reverb on a mono channel on my console, so I 've almost no loss, and I have my two good reverbs.
Now his biggest flaw: the price!
$ 750 if I don 't abuse!
While the quality is there, no problem, that is solid, that is clean, OK.
But to claim the $ 750 ...
I think this price is over-rated.
Me I had any occasion, and price of the occasion (half price) that is good, no worries, but the price of the new is really exaggerated.
Finally it 's just my opinion.