View other reviews for this product:
Neolabs
Published on 08/12/07 at 15:09
Prampli lamp (apparently a 12AX7, Submitted on many pramplis).
more prrglages following the use desired. (Electric guitar, bass, vocals, keyboard ...) or not to use the lamp, or the amplification some simple circuit without the lamp and with the limiter.
Please note this is not a distortion pedals, too bad the sound is particulirement if you push too much "volume" of the lamp.
Between the level of either the jack or the XLR, do not use both at the same time.
on the other hand in output, the still Jack and XLR, which can be used at the same time. To send the sound to an amplifier for example, and to the mixer simultaneously.
MODEL non rack.
UTILIZATION
Level use, it's easy.
The notice is the reminding some important information such as the fact that one should not use the two inputs (XLR and jack) at the same time. The fact also that when the ignition module (by connecting directly to the transformer, no on / off switch), it is vrifier the volume knob is at minimum.
the volume left RULES amplification lamp, and the right RULES gnral the output volume. Given a nitre-in LED shows whether the output is saturated, it is imperative to avoid.
<p class="bbcode-cite"> Quote: <span>In practice I could see that one can not saturate the output (in the green led) but the volume too pushed the lamp cr effect of distortion of the worst effect. So if you use the APRS pramp effects, although the clean sound Listen To verify the absence of distortion.</span>
Manual in several languages, also in French memory, read at least once.
SOUND QUALITY
For sound quality I would explain my dj use.
I use it with an Epiphone SG Special Cherry to make the sound via an EMU 0404 on my pc with Cubase and Guitar Rig 2. I suffered a big shortage of potatoes in between, so for me buying a pramp mandatory.
The sound is good particulirement. The pramp do what you ask him, he gives me enough of PCHE to have the best record with the effects without being forced to increase the gain in the software and thus the gnrer breath.
Speaking of breath, some comments about this pramp talk about it.
Indeed, the pramp gnre breath. especially if you abuse the output volume.
Apparently this comes from the electronic output, because the breath persists even if the volume of the lamp is ZrO.
In my case, I put the two-volume "9am", which is enough for me and allows me to avoid the breath that I mentioned.
You can also hear a lightweight bed if you change the "modeling" and the audio channel is active, but nothing serious on my ct is not a one that will blow pregnant.
Also note that for a given "optimal" I read on a site that had to wait about 10 minutes before the lamp is good and that temprature dlivre her best even .
Also avoid the plug and unplug often, only if you unplug the not play on for more than half an hour.
OVERALL OPINION
I use it for two days non stop, I think that report quality level / price, there is nothing wrong. There was less expensive and much less good.
I finally made a good quality for my compositions, and has a lot to pramp.
In the meantime can be to invest in a MODEL 200 the next time, if I evolve my home studio, and if my budget allows.
more prrglages following the use desired. (Electric guitar, bass, vocals, keyboard ...) or not to use the lamp, or the amplification some simple circuit without the lamp and with the limiter.
Please note this is not a distortion pedals, too bad the sound is particulirement if you push too much "volume" of the lamp.
Between the level of either the jack or the XLR, do not use both at the same time.
on the other hand in output, the still Jack and XLR, which can be used at the same time. To send the sound to an amplifier for example, and to the mixer simultaneously.
MODEL non rack.
UTILIZATION
Level use, it's easy.
The notice is the reminding some important information such as the fact that one should not use the two inputs (XLR and jack) at the same time. The fact also that when the ignition module (by connecting directly to the transformer, no on / off switch), it is vrifier the volume knob is at minimum.
the volume left RULES amplification lamp, and the right RULES gnral the output volume. Given a nitre-in LED shows whether the output is saturated, it is imperative to avoid.
<p class="bbcode-cite"> Quote: <span>In practice I could see that one can not saturate the output (in the green led) but the volume too pushed the lamp cr effect of distortion of the worst effect. So if you use the APRS pramp effects, although the clean sound Listen To verify the absence of distortion.</span>
Manual in several languages, also in French memory, read at least once.
SOUND QUALITY
For sound quality I would explain my dj use.
I use it with an Epiphone SG Special Cherry to make the sound via an EMU 0404 on my pc with Cubase and Guitar Rig 2. I suffered a big shortage of potatoes in between, so for me buying a pramp mandatory.
The sound is good particulirement. The pramp do what you ask him, he gives me enough of PCHE to have the best record with the effects without being forced to increase the gain in the software and thus the gnrer breath.
Speaking of breath, some comments about this pramp talk about it.
Indeed, the pramp gnre breath. especially if you abuse the output volume.
Apparently this comes from the electronic output, because the breath persists even if the volume of the lamp is ZrO.
In my case, I put the two-volume "9am", which is enough for me and allows me to avoid the breath that I mentioned.
You can also hear a lightweight bed if you change the "modeling" and the audio channel is active, but nothing serious on my ct is not a one that will blow pregnant.
Also note that for a given "optimal" I read on a site that had to wait about 10 minutes before the lamp is good and that temprature dlivre her best even .
Also avoid the plug and unplug often, only if you unplug the not play on for more than half an hour.
OVERALL OPINION
I use it for two days non stop, I think that report quality level / price, there is nothing wrong. There was less expensive and much less good.
I finally made a good quality for my compositions, and has a lot to pramp.
In the meantime can be to invest in a MODEL 200 the next time, if I evolve my home studio, and if my budget allows.